PRELIMINARY SSR1630CTJ SSR1630CAJ SSR1630DJ Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 16 AMPS 30 VOLTS SCHOTTKY RECTIFIER Designer’s Data Sheet FEATURES: • • • • • • • • • • PIV to 30 Volts Low Reverse Leakage Current Low Forward Voltage Drop Guard Ring for Overvoltage Protection Isolated Hermetically Sealed Package Custom Lead Forming Available Eutectic Die Attach Ultrasonic Aluminum Wire Bonds 150oC Operating Junction Temperature TX, TXV, and Space Level Screening Available. Consult Factory. TO-257 (J) Available in the Following Configurations: Rectifier: Common Cathode Centertap: Common Anode Centertap: Doubler: MAXIMUM RATINGS Peak Repetitive and Peak Reverse Voltage Average Rectified Forward Current o 1/ (Resistive Load, 60 Hz, Sine Wave, TA = 25 C) Peak Surge Current o 1/ (8.3 ms Pulse, Half Since Wave, TA = 25 C) Operating & Storage Temperature Maximum Thermal Resistance 1/ (Junction to Case) SSR1630J, SSR1630JDB, and SSR1630JUB SSR1630CTJ, SSR1630CTJDB, and SSR1630CTJUB SSR1630CAJ, SSR1630CAJDB, and SSR1630CAJUB SSR1630DJ, SSR1630DJDB, SSR1630DJUB Symbol Value Units VRRM VRWM VR 30 Volts IO 16 Amps IFSM 150 Amps TOP & Tstg -65 to +150 Rθθ JC 1.6 o o C C/W NOTE: 1/ Per Leg NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: SH0031A DOC SSR1630CTJ SSR1630CAJ SSR1630DJ Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 1/ Max Units –– –– 0.48 0.60 VDC VF3 VF4 –– –– 0.66 0.50 VDC Reverse Leakage Current (V R = 30 V, TA = 25ºC, 300 µsec pulse minimum) IR1 –– 1 mA Reverse Leakage Current (V R = 30 V, TC = 100ºC, 300 µsec pulse minimum) IR2 –– 150 mA Junction Capacitance o (V R = 10V, f = 1MHz, TA = 25 C) CJ –– 1900 pF Instantaneous Forward Voltage Drop (TA=25ºC, 300 µsec pulse) Instantaneous Forward Voltage Drop (IF = 16 A, 300 µsec pulse) Symbol Min IF = 7.5 A IF = 16.0 A VF1 VF2 TA= -55ºC TA= 125 ºC Typ CASE OUTLINE: TO-257 (Suffix J) OPTIONAL LEAD BEND CONFIGURATION PIN ASSIGNMENT CODE FUNCTION Pin 1 Pin 2 Pin 3 CT Common Cathode Anode Cathode Anode CA Common Anode Cathode Anode Cathode Doubler Cathode AC Anode D SUFIX JDB SUFIX JUB