F E AT U R E S MODEL NO. DS0073 5 0 - 5 00 MHz 2 mA, +15 VDC 0.75 dB Insertion Loss 50 dB Isolation Non-Reflective CMOS Driver SP3T P IN Dio d e SP 3T PART IDENTIFICATION RF2 13 .75 RF3 7 RF COM 1 RF1 19 .20 .20 50 Ω .018 DIA 24 PLACES 50 Ω 50 Ω • • .600 .100 TYP CONTRASTING COLOR BEAD 19 24 ••••••••• 1 .75 3 8 9 10 11 12 14 15 16 17 4 18 20 21 22 23 24 GND CONT 1 GND “1” 5 2 6 CONT 2 +15V CONT 3 “0” “0” .600 13 ••••• 7 .xx = .02 .xxx = .010 VSWR I.L. (dB) ISO (dB) GUARANTEED PERFORM A NCE 1.4 1.00 80 T Y P IC A L P E R F OR MA NCE at 25 ° C Parameter Min Typ Max Units Operating Frequency DC Current Control Type 50 2 TTL or CMOS ISO 1.3 .75 500 5 MHz mA ±2 ±2 1.0 µA µA dB dB 60 I. LOSS Control Current High Low 1.2 1.1 .50 .25 40 Insertion Loss Isolation VSWR Termination 20 VSWR 1.0 0 40 Thru 0 10 40 100 FREQUENCY (MHz) 400 1000 Impedance Switching Speed Transition (Rise/Fall) Time Switching (Video) Transients Intercept Points 2nd +60 3rd RF Power +35 Operate 1.0 1.0 0.75 51 1.18/1 1.12/1 50 3 300 640 +67 +43 +23 No Damage Operating Temperature DA I C O In d u s t r i e s -55 +25 Conditions At +15 VDC Supply 3 Line Open Collector TTL with Pull Up Resistor Logic “1” = On Logic “0” = Off VIH = +15V VIL = 0V 1.25/1 1.25/1 5 +10 +27 +125 OHMS µSEC nSEC mV dBm dBm dBm dBm °C 50% Input to 90% / 10% RF 90% / 10% or 10% / 90% RF Peak Value 85 MHz / 25 MHz 42.5 MHz / 25 MHz 0.1 dB Compression TA