F E AT U R E S MODEL NO. DS0052 10 - 2000 MHz TTL Driver Non-Reflective 14 Pin DIP See CDS0622 or 100C1558 for Connectorized Versions SP2T PIN Diode SP2T PART IDENTIFICATION +5V 14 .87 GND 13 GND 12 "0" CONTROL 11 GND 10 GND 9 N/C 8 6 GND 7 RF2 • • .20 • • .22 .018 DIA LEAD 14 PLACES .600 SQUARE CORNER .100 TYP .300 50Ω 1 7 14 8 VSWR I.L. (dB) ISO (dB) 1.8 2.0 100 1.6 1.5 • .50 1 RF1 .xx = .02 .xxx = .010 CONTRASTING COLOR BEAD 50Ω 2 GND • 3 GND 4 RF COM N/C = No Internal Connection GUARANTEED PERFORM ANCE T YP IC A L P E R F OR MA NCE at 25 °C Parameter Min Typ Max Units Operating Frequency DC Current Control Type 10 15 TTL 2000 25 MHz mA 20 20 0.8 1.2 1.6 2.2 ±0.2 µA µA dB dB dB dB dB dB dB dB dB 75 ISO Control Current High Low 1.4 1.0 50 1.2 0.5 25 Insertion Loss I. LOSS Insertion Loss Flatness Isolation 70 50 40 30 VSWR 1.0 0 0 1 4 10 40 100 400 1000 3000 VSWR Thru FREQUENCY (MHz) Termination Impedance Switching Speed Transition (Rise/Fall) Time Switching (Video) Transients Intercept Points 2nd 3rd RF Power Operate 1 1 0.6 0.9 1.0 1.5 ±0.1 82 62 50 40 1.15/1 1.2/1 1.1/1 1.3/1 50 0.4 0.1 780 +72 +42 +12 No Damage Operating Temperature DA I C O In d u s t r i e s 5 GND -55 +25 1.25/1 1.5/1 1.3/1 1.5/1 1.0 +10 +30 +125 OHMS µSEC µSEC mV dBm dBm dBm dBm °C Conditions at +5 VDC Supply 1 Line Logic “0”= RF COM to RF2 Logic “1”= RF COM to RF1 VIH = +2.7V VIL = +0.5V 10 - 200 MHz 200 - 500 MHz 500 - 1000 MHz 1000 - 2000 MHz 20 - 200 MHz 10 - 100 MHz 100 - 500 MHz 500 - 1000 MHz 1000 - 2000 MHz 10 - 1000 MHz 1000 - 2000 MHz 10 - 1000 MHz 1000 - 2000 MHz 50% TTL to 90% / 10% RF 90% / 10% or 10% / 90% RF Peak Value 70 MHz / 50 MHz 35 MHz / 50 MHz 0.1 dB Compression TA Iss. 2