SENSITRON SEN-R-1050-034

SENSITRON
SEMICONDUCTOR
SEN-R-1050-XXX
TECHNICAL DATA SHEET 4199, REV. TRANSIENT VOLTAGE SUPPRESSOR 5000 WATT SERIES
GLASS PASSIVATED DIE/CELL
FEATURES
•
•
•
•
•
•
•
DESCRIPTION
5000W peak pulse power dissipation
Glass passivated junction
Low incremental surge resistance
Excellent clamping capability
Repetition rate (duty cycle): 0.05%
Fast response time: typically less than 1.0 ps
Typical IR less than 1µA above 10V
This is a transient voltage suppressor series
extending from 5.0 volts to 100 volts. It is available
in
either
uni-directional
or
bi-directional
configurations.
The cell version is available in a Type 1
configuration with double tabs. A Type 2
configuration with silicone edge protection
protecting the edge of the die and the die cavity
between the double tabs is also available as a
custom option.
APPLICATIONS
ü
ü
ü
ü
Power Supply Surge Protection
Data Link Surge Protection
Lightning Transient Suppression
Electrostatic Protection
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
Peak Pulse Power
Pppm
Test Conditions
Min
TA = 25 8C, Tp = 1 ms (Note 1)
TYP
Max
5000
Electrical Parameters
Unit
Watts
See Table
Maximum Solder Temperature
Tmax
Operating & Storage
Temperature
10 Second exposure
Tj, Tstg
-55
250
8C
175
8C
Note 1: Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 8C per Fig. 2.
B
D
A
CHIP
G
F
C
TVS T1 CELL
TVS T2 CELL
A
B
C
D
E
F
G
220
13.5
277
98
305
277
98
Note 1: All dimension in MIL
Note 2: The dimension is for low voltage parts (<40V) only. The dimension B, D and G will be larger for
high voltage parts (>40V).
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •
E
SENSITRON
SEMICONDUCTOR
SEN-R-1050-XXX
TECHNICAL DATA SHEET 4199, REV. Note 2: Die only configuration requires user to provide adequate energy absorption.
SEN-R-1050-XXX
Part Number
SEN-R-1050-001
SEN-R-1050-002
SEN-R-1050-003
SEN-R-1050-004
SEN-R-1050-005
SEN-R-1050-006
SEN-R-1050-007
SEN-R-1050-008
SEN-R-1050-009
SEN-R-1050-010
SEN-R-1050-011
SEN-R-1050-012
SEN-R-1050-013
SEN-R-1050-014
SEN-R-1050-015
SEN-R-1050-016
SEN-R-1050-017
SEN-R-1050-018
SEN-R-1050-019
SEN-R-1050-020
SEN-R-1050-021
SEN-R-1050-022
SEN-R-1050-023
SEN-R-1050-024
SEN-R-1050-025
SEN-R-1050-026
SEN-R-1050-027
SEN-R-1050-028
SEN-R-1050-029
SEN-R-1050-030
SEN-R-1050-031
SEN-R-1050-032
SEN-R-1050-033
SEN-R-1050-034
SEN-R-1050-035
SEN-R-1050-036
SEN-R-1050-037
SEN-R-1050-038
SEN-R-1050-039
SEN-R-1050-040
SEN-R-1050-041
SEN-R-1050-042
SEN-R-1050-043
SEN-R-1050-044
SEN-R-1050-045
SEN-R-1050-046
SEN-R-1050-047
5000 Watt TVS Series
Vz min
Vz max
Ir max
Vr
(V)
@ Iz
(V)
@ Iz
(V)
Iz
(mA)
Vcc
(V)
Ip
(A)
@ Vr
(uA)
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10.0
11.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
45.0
48.0
51.0
54.0
58.0
60.0
64.0
70.0
75.0
78.0
85.0
90.0
100.0
110.0
120.0
130.0
150.0
160.0
170.0
180.0
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.00
11.10
12.20
13.30
14.40
15.60
16.70
17.80
18.90
20.00
22.20
24.00
26.70
28.90
31.10
33.30
36.70
40.00
44.40
47.80
50.00
53.30
56.70
60.00
64.40
66.70
71.10
77.80
83.30
86.70
94.40
100.00
110.00
122.00
133.00
144.00
167.00
178.00
189.00
200.00
7.00
7.37
7.98
8.60
9.21
9.83
10.40
11.10
12.30
13.50
14.70
15.90
17.20
18.50
19.70
20.90
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
49.10
52.80
55.30
58.90
62.70
66.30
71.20
73.70
78.60
86.00
92.10
95.80
104.00
111.00
123.00
135.00
147.00
159.00
185.00
197.00
209.00
233.00
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
289.0
544.0
486.0
447.0
417.0
388.0
368.0
348.0
325.0
295.0
275.0
252.0
233.0
216.0
205.0
193.0
181.0
172.0
154.0
141.0
129.0
119.0
110.0
103.0
93.9
86.1
77.6
72.1
68.8
64.7
60.7
57.5
53.5
51.7
48.6
44.3
41.4
39.7
36.5
34.3
30.9
28.3
26.0
24.0
20.6
19.3
18.2
17.3
10000
10000
4000
2000
500
300
100
40
30
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
SEN-R-1050-XXX
100
100
PPPM -Peak Pulse Power (kW)
PPPM -Peak Pulse Power (kW)
TECHNICAL DATA SHEET 4199, REV. Non-repetitive pulse
waveform shown in
Fig.3 TA = 25°C
10
1
75
50
25
0.1
0
0.1
1.0
10.0
100.0
1000.0
10000.0
0
25
50
75
100
Fig. 1 - Peak Pulse Power Rating Curve
TJ = 25°C
Pulse Width(td)
is defined as the point
where the peak current
decays to 50% of IPPM
CJ, Junction Capacitance
IPPM - Peak Pulse Current,%
100
10/1000µsec.Waveform
as defined by R.E.A.
50
150
175
200
Fig.2 - Pulse Derating Curve
150
tr = 10µsec.
Peak Value
IPPM
125
TA - Ambient Temperature (°C)
td - Pulse Width (sec.)
td
TJ = 25°C
f = 1MHZ
Vsig = 50mVp -p
100000
Measured at
Zero Bias
10000
Measured at
Stand-off voltage
Vwm
1000
0
0.0
1.0
2.0
3.0
100
4.0
1
t - Time(ms)
PPM(AV),Steady State Power
Dissipation (W)
8
60Hz Resistive or
Inductive Load
6
4
2
0
0
25
50
75
100
1000
Fig. 4 - Typical Junction Capacitance
IFSM,Peak Forward Surge Currnet (A)
Fig.3 - Pulse Waveform
10
100 (V)
VBR - Breakdown
Voltage
125
150
175
200
TL - Lead Temperature (°C)
Fig. 5 - Steady State Power Derating Curve
500
8.3ms Single Half
Sine-Wave
(JEDEC Method)
450
400
350
300
250
200
1
10
100
Number of Cycles at 60 HZ
Fig.6 - Maximum Non-repetitive Forward
Surge current
• 221 West Industry Court • Deer Park, NY 11729-4681 • Phone (631) 586-7600 • Fax (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - [email protected] •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]