140.0 MHz Low-Loss Filter 10.0 MHz Bandwidth Part Number SF0140BA03070S Integrated Circuit Systems, Inc. TYPICAL PERFORMANCE Horizontal: 4.0 MHz/div Vertical (from top): Magnitude Magnitude Group Delay 10 dB/div 1 dB/div 100 ns/div SPECIFICATION Parameter Center Frequency ( Fc) 1 Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Ripple 2 Phase Ripple 2 Group Delay Ripple 2 Absolute Delay Ultimate Rejection Temperature Coefficient of Frequency Substrate Material Source and Load Impedance Ambient Temperature Min. 139.6 Typ. Max. 140.0 140.4 10.2 11.0 8.0 10.2 10.0 11.1 14.0 15.0 0.5 1.0 6.0 15 75 120 1.06 40 50 -94 YZ Lithium Niobate 50 25 Units. MHz dB MHz MHz MHz dB p-p deg p-p ns p-p us dB ppm/º C Ω ºC Notes: 1. Mean Value of 3 dB points. 3dB measured from peak. 2. Measured over 90% of 3 dB Bandwidth Rev 1.0 9-Nov-04 Page 1 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com 140.0 MHz Low-Loss Filter 10.0 MHz Bandwidth Part Number SF0140BA03070S Integrated Circuit Systems, Inc. PACKAGE OUTLINE Units: mm Pin Configuration: Input: 11 Input Return: 12 Output: 5 Output Return: 6 Ground: All other pins MATCHING CIRCUIT Ls1 Ls2 11 5 12 6 Component values: Ls1 = 47 nH Ls2 = 100 nH (Minimum Q = 45) Notes 1. Recommend use of 5% tolerance components. 2. Optimum values depend on board layout. Values intended as guide only. ISO 9001 Registered Rev 1.0 9-Nov-04 Page 2 of 2 Integrated Circuit Systems • Surface Acoustic Wave Products 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com