ROHM EMF33

EMF33
Transistors
Power management,
Dual-chip Bipolar Transistor
EMF33
zApplications
Power management circuit
zDimensions (Unit : mm)
EMT6
1.6
0.5
1.0
0.5 0.5
zFeatures
1) DTB513Z (digital transistor) and 2SK3019 (MOS FET) are
housed independently in the EMT6 package.
2) Power switching circuit in a single package.
3) Mounting cost and area can be cut in half.
(6) (5) (4)
1.6
1.2
1pin mark
(1) (2) (3)
0.22
0.13
Each lead has same dimensions
Abbreviated symbol : F33
zStructure
Epitaxial Plannar Silicon Transistor
zPackaging specifications
Package
Type
zEquivalent circuit
Taping
Code
T2R
Basic ordering unit (pieces)
8000
(6)
(5)
(4)
∗1
EMF33
Tr2
∗2
Tr1
zAbsolute maximum ratings (Ta=25°C)
<Tr1>
R2
Parameter
Supply voltage
Input voltage
Collector current
Symbol
VCC
VIN
IC(max)
∗
Limits
−12
−10 to +5
−500
Unit
V
V
mA
∗ Characteristics of built-in transistor.
R1
(1)
(2)
∗1 ESD protection diode
∗2 Body diode
(3)
(1) Emitter
(2) Base
(3) Drain
(4) Source
(5) Gate
(6) Collector
Tr1 : R1/R2=1kΩ/10kΩ
Tr2 : MOS FET
<Tr2>
Parameter
Drain-source voltage
Gate-source voltage
Continous
Pulsed
Continous
Reverse drain current
Pulsed
Drain current
Symbol
VDSS
VGSS
ID
IDP
IDR
IDRP
∗
∗
Limits
30
±20
100
200
100
200
Unit
V
V
mA
mA
mA
mA
∗ PW≤10ms DUTY CYCLE≤50%
<Tr1, Tr2 in common>
Parameter
Symbol
PD
Power dissipation
Junction temperature
Range of storage temperature
Tj
Tstg
∗
Limits
150
120
150
−55 to +150
Unit
mW / TOTAL
mW / ELEMENT
°C
°C
∗ Each terminal mounted on a recommended land.
1/2
EMF33
Transistors
zElectrical characteristics (Ta=25°C)
<Tr1>
Parameter
Symbol
Min.
VI(off)
VI(on)
VO(on)
II
IO(off)
GI
fT ∗
R1
R2/R1
−
−2.5
−
−
−
140
−
0.7
8
Gate-source leakage
Drain-source breakdown voltage
Zero gate voltage drain current
Gate-threshold voltage
Symbol
IGSS
V(BR)DSS
IDSS
VGS(th)
Static drain-source on-resistance
RDS(on)
Forward transfer admittance
Input capacitance
Output capacitance
Reverse transfer capacitance
Turn-on delay time
Rise time
Turn-off delay time
Fall time
Yfs
Ciss
Coss
Crss
td(on)
tr
td(off)
tf
Min.
−
30
−
0.8
−
−
20
−
−
−
−
−
−
−
Input voltage
Output voltage
Input current
Output current
DC current gain
Transition frequency
Input resistance
Resistance ratio
Typ.
−
−
−60
−
−
Max.
−0.3
−
−300
−6.4
−0.5
−
260
1
10
−
−
1.3
12
Typ.
−
−
−
−
Max.
±1
−
1.0
1.5
5
7
−
13
9
4
15
35
80
80
8
13
−
−
−
−
−
−
−
−
Unit
V
V
mV
mA
uA
−
−
kΩ
−
Conditions
VCC= −5V, IO= −100µA
VO= −0.3V, IO= −20mA
VO= −100mA, II= −5mA
VI= −5V
VCC= −12V, VI= 0V
VO= −5V, IO= −100mA
VCE= −10V, IE= 5mA, f=100MHz
Unit
µA
−
µA
V
Ω
Ω
ms
pF
pF
pF
ns
ns
ns
ns
Conditions
VGS= ±20V, VDS=0V
ID= 10µA, VGS=0A
VDS= 30V, VGS=0V
VDS= 3V, ID=100µA
ID= 10mA, VGS= 4V
ID= 1mA, VGS= 2.5V
VDS= 3V, ID= 10mA
∗ Characteristics of built-in transistor.
<Tr2>
Parameter
VDS= 5V
VGS= 0V
f=1MHz
ID= 10mA
VDD= 5V
VGS= 5V
RL= 500Ω
RGS= 10Ω
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1