RJP020N06 Transistors 2.5V Drive Nch MOS FET RJP020N06 zStructure Silicon N-channel MOS FET zExternal dimensions (Unit : mm) MPT3 (2) (3) 1.0 (1) 0.5 0.4 1.5 0.4 0.4 1.5 3.0 (1)Gate zApplications Switching (2)Drain (3)Source Abbreviated symbol : LS zInner circuit zPackaging specifications Package Type 1.5 2.5 4.0 zFeatures 1) Low On-resistance. 2) Low voltage drive (2.5V drive). 0.5 4.5 1.6 DRAIN Taping Code T100 Basic ordering unit (pieces) 1000 RJP020N06 ∗2 GATE ∗1 SOURCE ∗1 ESD PROTECTION DIODE ∗2 BODY DIODE zAbsolute maximum ratings (Ta=25°C) Parameter Drain-source voltage Gate-source voltage Continuous Pulsed Continuous Pulsed Drain current Source current (Body diode) Total power dissipation Channel temperature Range of storage temperature Symbol VDSS VGSS ID IDP ∗1 IS ISP ∗1 PD Tch Tstg Limits 60 ±12 ±2.0 ±8.0 2.0 8.0 500 2 ∗2 150 −55 to +150 Unit V V A A A A mW W °C °C Limits 250 62.5 ∗ Unit °C/W °C/W + + ∗1 Pw≤10µs, Duty cycle≤1% ∗2 When mounted on a 40 40 0.7mm ceramic board zThermal resistance Parameter Channel to ambient Symbol Rth(ch-a) + + ∗ When mounted on a 40 40 0.7mm ceramic board 1/2 RJP020N06 Transistors zElectrical characteristics (Ta=25°C) Parameter Symbol IGSS Gate-source leakage Drain-source breakdown voltage V(BR) DSS IDSS Zero gate voltage drain current VGS (th) Gate threshold voltage Static drain-source on-state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate-source charge Gate-drain charge RDS (on)∗ Yfs Ciss Coss Crss td (on) tr td (off) tf Qg Qgs Qgd ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ Min. − 60 − 0.8 − − − 1.5 − − − − − − − − − − Typ. Max. − − − − 165 170 210 − 160 50 45 8 18 40 20 5 1 2.5 ±10 − 1 1.5 240 250 300 − − − − − − − − 10 − − Conditions Unit µA V µA V mΩ mΩ mΩ S pF pF pF ns ns ns ns nC nC nC VGS= ±12V, VDS=0V ID= 1mA, VGS=0V VDS= 60V, VGS=0V VDS= 10V, ID= 1mA ID= 2A, VGS= 4.5V ID= 2A, VGS= 4V ID= 2A, VGS= 2.5V VDS= 10V, ID= 2A VDS= 10V VGS=0V f=1MHz VDD 30V ID= 1A VGS= 4V RL=30Ω RG=10Ω VDD 30V VGS= 4V ID= 2A Unit V IS= 2A, VGS=0V ∗Pulsed zBody diode characteristics (Source-drain) (Ta=25°C) Parameter Forward voltage Symbol Min. Typ. Max. VSD − − 1.2 Conditions 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1