Filter Coils < Pin Type: FB Series> Type: FB2-6G ◆ Product Description ・14.0×7.2mm Max.(L×W), 10.5mm Max. Height. ・Operating frequency:500kHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements. ◆ Feature ・Variable shielded type with two individual coils combined. ・Two built-in capacitors are available in one coil. ・Ideally used as Audio Filters(LPF, BPF, Delay Line) ・RoHS Compliance MAX.10.5 6.8±0.4 ＋1.0 −0.5 3.0 4.0±0.2 4.0±0.2 6.6±0.5 ＋0.1 φ0.5−0.05 MAX.14.0 1.0±0.2 ◆ Dimensions (mm) 4.0±0.2 ＊ Dimension does not include solder used on coil. ＊ Pin pitch should be measured at the root of terminals. C1∼C5 are externally mounted ◆ Testing Circuit capacitors Rin Rg R1 ③ ④ ⑤ ② 1st ① ⑫ 2nd ⑩ ⑨ C4 S.G. ∼ C1 Rin=Rg+R1=1kΩ Rout=1kΩ ⑥ C2 C1=1200pF±2％ ⑧ C5 C2=3300pF±2％ Rout E.V.M. C3 C3=1800pF±2％ C4=3300pF±2％ C5=1200pF±2％ Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 Filter Coils < Pin Type: FB Series> Type: FB2-6G ◆ Specification of Low Pass Filters (Part Number: 4513-T007) Item Specification Input impedance (Rin) 1.0kΩ Output impedance (Rout) 1.0kΩ Attenuation Insertion Loss 47.2kHz Max.6.0dB 55.06kHz 31dB (TYP) 1kHz Max.2.0dB Frequency Response(Attenuation 1kHz=0dB) Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2