Filter Coils < Pin Type: FB Series> Type: FB-7G ◆ Product Description ・8.2×8.2mm Max.(L×W), 11.5mm Max. Height. ・Operating frequency:250kHz Max. ・In addition to the reference versions of parameters shown here, custom designs are available to meet your exact requirements. ◆ Feature ・Variable shielded type. ・Two capacitors can be internally mounted in one section. ・Ideally used as Audio Filters(LPF, BPF, Delay Line) ・RoHS Compliance 7 .8 ± 0. 5 1 1 .5 M AX . 3 .0 ± 0 . 5 4 . 5 ± 0 . 15 +0.1 φ 0 . 5 -0 . 0 5 7 .8 ± 0 .5 1 .0 ± 0. 2 ◆ Dimensions (mm) 4. 5 ± 0 . 15 * Dimension does not include solder used on coil. * Pin pitch should be measured at the root of terminal. ◆ Testing Circuit Rg1=Rg2=50Ω R in=Rg1+R1=2.7kΩ R out=Rg2+R2 =4.7kΩ C1=1800pF±5%, C2=3900pF±5% Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1 Filter Coils < Pin Type: FB Series> Type: FB-7G ◆ Specification (part number: 5327-T016) Item Specification Input impedance (R in) 2.7kΩ Output impedance (Rout) 4.7kΩ Attenuation Insertion loss Ripple 15kHz 1.7dB Max. 19kHz 30dB Min. 23kHz 17dB Min. 38kHz 32dB Min. 1kHz 1kHz∼13kHz 1.0dB Max. 0±1.6dB within Frequency Response (Attenuation 0dB at 1KHz) Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2