TLP434A & RLP434A RF ASK Hybrid Modules for Radio Control ( New Version ) TLP434A Ultra Small Transmitter RLP434A SAW Based Receiver 10.3mm 13.3mm Easy-Link Wireless 1 2 3 4 13.0mm pin 1 : Gnd pin 2 : Digital Data Output pin 3 : Linear Output /Test pin 4 : Vcc pin 5 : Vcc pin 6 : Gnd pin 7 : Gnd pin 8 : Antenna 43.42mm pin 1 : GND pin 2 : Data In pin 3 : Vcc pin 4 : Antenna ( RF output ) 11.5mm 1 3 2 3 4 4 5 7 6 7 8 8 24.72mm 10.5mm 2.54mm Frequency 315, 418 and 433.92 Mhz Modulation : ASK Supply Voltage : 3.3 - 6.0 VDC Output : Digital & Linear Frequency 315, 418 and 433.92 Mhz Modulation : ASK Operation Voltage : 2 - 12 VDC Symbol Vcc Icc 1 Icc 2 Vh Vl FO PO Parameter Conditions Operating supply voltage Peak Current (2V) Peak Current (12V) Input High Voltage Input Low Voltage Absolute Frequency RF Output Power- 50ohm Min Typ 2.0 Idata= 100uA (High) Vcc-0.5 Vcc Idata= 0 uA (Low) 315Mhz module 314.8 315 Vcc = 9V-12V 16 Vcc = 5V-6V 14 DR Data Rate External Encoding 512 4.8K Notes : ( Case Temperature = 25°C +- 2°C , Test Load Impedance = 50 ohm ) Max Unit 12.0 1.64 19.4 Vcc+0.5 0.3 315.2 200K V mA mA V V MHz dBm dBm bps Application Circuit : Typical Key-chain Transmitter using HT12E-18DIP, a Binary 12 bit Encoder from Holtek Semiconductor Inc. Symbol Parameter Vcc Operating supply voltage Itot Operating Current Vdata Data Out Conditions Idata = +200 uA ( High ) Idata = -10 uA ( Low ) Min Typ Max 3.3 Vcc-0.5 - 5.0V 4.5 - 6.0 Vcc 0.3 Electrical Characteristics Characteristics Operation Radio Frequency Sensitivity Channel Width Noise Equivalent BW Receiver Turn On Time Operation Temperature Baseboard Data Rate SYM FC Pref Min Top -20 Typ 315, 418 and 433.92 -110 +-500 4 5 4.8 Max 80 Application Circuit : Typical RF Receiver using HT12D-18DIP, a Binary 12 bit Decoder with 8 bit uC HT48RXX from Holtek Semiconductor Inc. Laipac Technology, Inc. 105 West Beaver Creek Rd. Unit 207 Richmond Hill Ontario L4B 1C6 Canada Tel: (905)762-1228 Fax: (905)763-1737 e-mail: [email protected] V mA V V Unit MHz dBm Khz Khz ms C KHz