C&K GS Series Sealed Ultraminiature Slide Switches Features/Benefits • Ultraminiature design saves PCB space • Sealed construction, process compatible with most PCB wash processes • Available in thru-hole and surface mount • Long life contact design • RoHS compliant Slide J Typical Applications • Computer peripherals & network products • Test & measurement equipment • Telephone & cable modems Specifications Materials CONTACT RATING: 0.4 VA max. @ 20 V AC or DC max. MECHANICAL & ELECTRICAL LIFE: 40,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 50 m Ω typ. initial @ 2–4 V DC, 100 mA. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 500 Vrms min. @ sea level. STORAGE & OPERATING TEMPERATURE: –30ºC to 85ºC. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). PACKAGING: Switches available in embossed anti-static tape and reels per EIA 481A. Some models available on embossed anti-static tape and reels per EIA 481-3, consult Customer Service Center. HOUSING & BASE: Glass filled 6/6 or 4/6, flame retardant, heat stabilized (UL 94V-0). ACTUATOR: Polyetherimide PEI (UL 94V-0), with standard internal seal. SWITCH SUPPORT: Brass, matte-tin plated. MOVABLE CONTACT: Copper with gold plate over nickel plate. STATIONARY CONTACTS: Copper alloy, with gold plate over nickel plate. TERMINALS: Copper alloy, with gold plate over nickel plate. TERMINAL SEAL: Epoxy. All terminals insert molded. NOTE: All models are RoHS compliant and compatible with all options. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. How To Order Complete part numbers for GS Series Sealed Ultraminiature Slide Switches are shown below and on page J–17. C & K MARKING ON OPPOSITE SIDE SWITCH FUNCTION POS.1 POS. 2 PART NUMBER SCHEMATIC GS01MCBE ON ON Conn. Terms. 2-1 2-3 GS02MCBE OFF ON OPEN 3-1 GS04MCBE ON OFF Conn. Terms. 1-3 OPEN Conn. Terms. TOTAL TRAVEL Actuator Shown In Pos. 1 SPDT PC MOUNTING Actuator Shown In Pos. 1 SPST SPST GS02-omit center hole. GS02 Model GS01MCBE SPDT Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–16 www.ittcannon.com C&K GS Series Sealed Ultraminiature Slide Switches SWITCH FUNCTION POS.1 POS. 2 TOTAL TRAVEL PART NUMBER SCHEMATIC ON ON Conn. Terms. 2-1 2-3 GS02MABE OFF ON OPEN 3-1 GS04MABE ON OFF Conn. Terms. 1-3 OPEN Actuator Shown PC MOUNTING Conn. Terms. GS01MABE Horizontal Actuation GS02 Model SPDT SPST SPST SPDT SWITCH FUNCTION TOTAL TRAVEL POS.1 POS. 2 PART NUMBER SCHEMATIC GS01MSABE ON ON Conn. Terms. 2-1 2-3 GS02MSABE OFF ON OPEN 3-1 GS04MSABE ON OFF Conn. Terms. 1-3 OPEN GS02 Model Actuator Shown In Pos. 1 PC MOUNTING SMT Conn. Terms. GS01MSABE Horizontal Actuation SPDT SPST SPST SPDT TAPE & REEL FOR PART NUMBERS GS01MSABE, GS02MSABE, GS04MSABE REEL INFORMATION OUTSIDE DIAMETER PILOT HOLE QUANTITY PER REEL 13.00 (330,0) .512 (13,0) 600 Dimensions are shown: Inch (mm) Specifications and dimensions subject to change J–17 www.ittcannon.com J Slide GS01MABE