AC Current Sensor HARTMAN Aerospace Power Products Features: • SPST Main Contacts • Current Indicator • Epoxy Encapsulated • 115 VAC • .25 Amp • High Reliability • Meets many requirements of MIL-R-6106 • Light Weight Construction QR-50DA SPST, .25 Amp, 115 VAC CONTACTOR CONFIGURATION Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. Notes: PRODUCT SPECIFICATIONS Operating Characteristics Operating Voltage Pick-Up Continuous Contact Rating Lamp Load Temperature Vibration Altitude Weight Maximum 115 VAC, 1 Phase, 400 Hz 0.3 ±.1 Amp AC 3 Amps AC Maximum .25 Amp 28 VDC .080 Amp 28 VDC -55°C to +71°C 10 G'S to 500 Hz 50,000 Feet Maximum 4 Oz. For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. Catalog (web doc only) Revised 5-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967