H30D05C – H30D60C WTE POWER SEMICONDUCTORS Pb 30A GLASS PASSIVATED DUAL ULTRAFAST RECTIFIER Features ! Glass Passivated Die Construction ! ! ! ! ! Ultra-Fast Switching Low Forward Voltage Drop Low Reverse Leakage Current S High Surge Current Capability Plastic Material has UL Flammability R Classification 94V-O L H J K PIN1 ! ! ! ! ! 2 3 P Mechanical Data ! ! Dim A B C D E G H J K L M N P R S N Case: TO-3P, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-750, Method 2026 Polarity: See Diagram Weight: 5.6 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 M A B TO-3P Min Max 3.20 3.50 4.70 5.30 — 23.00 19.00 — 2.80 3.20 0.45 0.85 — 16.20 1.70 2.70 3.15 Ø 3.65 Ø — 4.50 5.25 5.65 1.10 1.40 — 2.50 11.70 12.70 5.00 6.00 All Dimensions in mm C PIN 1 - G D + PIN 3 - Case, PIN 2 E Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current H30D 05C H30D 10C H30D 15C H30D 20C H30D 30C H30D 40C H30D 50C H30D 60C Unit VRRM VRWM VR 50 100 150 200 300 400 500 600 V VR(RMS) 35 70 105 140 210 280 350 420 V IO 30 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 300 A Forward Voltage @IF = 15A VFM @TA = 25°C @TA = 125°C IRM Peak Reverse Current At Rated DC Blocking Voltage @TC = 100°C Symbol Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) Cj Operating and Storage Temperature Range 1.0 1.3 1.7 V 10 500 50 75 175 Tj, TSTG µA 100 145 -55 to +150 nS pF °C Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. See figure 5. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. H30D05C – H30D60C 1 of 4 © 2006 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE FORWARD CURRENT (A) 30 24 18 12 6 0 0 50 100 100 05C - 20C 50C - 60C 1.0 Pulse width = 300µs 2% duty cycle 0.1 0 150 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.5 1.0 1.5 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 400 300 Tj = 25°C f = 1.0MHz 8.3 ms single half-sine-wave JEDEC method Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 30C - 40C 10 200 100 H30D05C H30D40C 100 H30D50C H30D60C 10 0 1 10 0.1 100 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current trr +0.5A 50Ω NI (Non-inductive) 10Ω NI Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 5/10ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit H30D05C – H30D60C 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION H30DxxC H30DxxC xx Polarity = Device Number = 05, 10, 15, 20, 30, 40, 50 or 60 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 505 x 46 x 6.5 30 520 x 145 x 95 1,200 540 x 306 x 115 2,400 18.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 6-32 hardware is used. 6-32 HEX Head Screw Plain Washer A conical washer should be used to apply proper force to the device. Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. Rectifier Insulator Heatsink Conical Washer The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. H30D05C – H30D60C 6-32 HEX Nut 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity H30D05C TO-3P 30 Units/Tube H30D10C TO-3P 30 Units/Tube H30D15C TO-3P 30 Units/Tube H30D20C TO-3P 30 Units/Tube H30D30C TO-3P 30 Units/Tube H30D40C TO-3P 30 Units/Tube H30D50C TO-3P 30 Units/Tube H30D60C TO-3P 30 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, H30D05C-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. H30D05C – H30D60C 4 of 4 © 2006 Won-Top Electronics