SB820CT – SB8100CT WTE POWER SEMICONDUCTORS Pb 8.0A DUAL SCHOTTKY BARRIER RECTIFIER Features ! Schottky Barrier Chip ! ! ! ! ! Guard Ring for Transient Protection Low Forward Voltage Drop C Low Reverse Leakage Current High Surge Current Capability G Plastic Material has UL Flammability Classification 94V-O D B Mechanical Data ! ! ! ! ! ! ! A PIN1 2 3 F Case: TO-220, Molded Plastic Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: See Diagram Weight: 2.24 grams (approx.) Mounting Position: Any Mounting Torque: 11.5 cm-kg (10 in-lbs) Max. Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 TO-220 Dim Min Max 13.90 15.90 A 9.80 10.70 B 2.54 3.43 C 3.56 4.56 D 12.70 14.73 E 0.51 0.96 F 3.55 Ø 4.09 Ø G 5.75 6.85 H 4.16 5.00 I 2.03 2.92 J 0.30 0.65 K 1.14 1.40 L 2.29 2.79 P All Dimensions in mm E P I H L PIN 1 - J + PIN 3 - Case, PIN 2 K Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TC = 95°C SB SB SB SB SB SB SB SB 820CT 830CT 840CT 845CT 850CT 860CT 880CT 8100CT Unit VRRM VRWM VR 20 30 40 45 50 60 80 100 V VR(RMS) 14 21 28 32 35 42 56 70 V IO 8.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150 A Forward Voltage @IF = 4.0A VFM Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C IRM 0.5 50 mA Typical Junction Capacitance (Note 1) Cj 700 pF Tj, TSTG -65 to +150 °C Operating and Storage Temperature Range 0.55 0.75 0.85 V Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. SB820CT – SB8100CT 1 of 4 © 2006 Won-Top Electronics 10 IF, NSTANTANEOUS FORWARD CURRENT (A) I(AV), AVERAGE OUTPUT CURRENT (A) 40 8 6 4 2 Single Pulse Half-Wave 60 Hz Resistive or Inductive Load 0 10 40 60 80 100 120 140150 820CT - 845CT 20 850CT - 860CT 880CT - 8100CT 10 Tj = 25ºC Pulse Width = 300 µs 2% Duty Cycle 1 1.0 1.5 2.0 2.5 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 2000 150 Tj = 25ºC f = 1MHz 120 Cj, CAPACITANCE (pF) IFSM , PEAK FORWARD SURGE CURRENT (A) 0.5 0 TC, CASE TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve 90 60 1000 30 8.3ms Single Half Sine-Wave JEDEC Method 100 0 1 10 0.1 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Peak Fwd Surge Current SB820CT – SB8100CT 2 of 4 1.0 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance © 2006 Won-Top Electronics 100 MARKING INFORMATION WTE SB8xxCT WTE SB8xxCT xx Polarity = Manufacturer’s Logo = Device Number = 20, 30, 40, 45, 50, 60, 80 or 100 = As Marked on Body PACKAGING INFORMATION BULK Tube Size L x W x H (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 525 x 31 x 6 50 555 x 145 x 95 2,000 572 x 306 x 218 8,000 19.0 Note: 1. Anti-static tube, water clear color. RECOMMENDED SCREW MOUNTING ARRANGEMENT Recommended isolated mounting when screw is at heatsink potential. 4-40 hardware is used. 4-40 PAN or HEX Head Screw Plain Washer Screw should not be tightened with any type of air-forced torque or equipment that may cause high impact on device package. The insulating bushing inside the mounting hole will insure the screw threads do not contact the metal base. The interface should apply a layer of thermal grease or a highly conductive thermal pad for better heat dissipation. SB820CT – SB8100CT Insulating Bushing Rectifier Insulator Heatsink Compression Washer 4-40 HEX Nut 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity SB820CT TO-220 50 Units/Tube SB830CT TO-220 50 Units/Tube SB840CT TO-220 50 Units/Tube SB845CT TO-220 50 Units/Tube SB850CT TO-220 50 Units/Tube SB860CT TO-220 50 Units/Tube SB880CT TO-220 50 Units/Tube SB8100CT TO-220 50 Units/Tube 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, SB820CT-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. SB820CT – SB8100CT 4 of 4 © 2006 Won-Top Electronics