HDM128GS12_-1 128 X 128 Dots Graphic, Small Size Dimensional Drawing 72.4±0.5 67.4 65.2 49.0±0.2 MAX 9.5 (13.5 WITH LED) 1.6 0.32 0.03 0.32 2.5 4.65 (8.1 WITH LED) 15.0 44.77 P1.0X19=19.0 1.0 0.5 0.5 69.9±0.5 27.45 0.03 5.25 64.9 44.7 10.45 4-∅2.5 59.4 11.7±0.2 49.0±0.2 2.5 3.6±0.5 CONNECTOR INFORMATION: MOLEX 52271-2090 ZIF SOCKET OR FFC SOLDERED TO PCB 4-R1.0 Dimension tolerance: +/-0.3mm Features Features Backlight...................................................EL or LED Optional Options...............................................Gray STN / Yellow STN Normal/Extended Temperature Bottom / Top Viewing Built-in Controller...........................................Toshiba T6963C Physical Data Module Size................(None or EL) 72.4W x 69.9H x 9.5T mm (LED) 72.4W x 69.9H x 13.5T mm Viewing Area Size.......................................49.0W x 49.0H mm Dot Pitch.....................................................0.35W x 0.35H mm Dot Size......................................................0.32W x 0.32H mm Weight.................................................................................55g Power Supply VDD Absolute Maximum Ratings PARAMETER SYMBOL SUPPLY VOLTAGE VDD-VSS POWER SUPPLY FOR LCD VL INPUT VOLTAGE VIN OPERATING TEMPERATURE TOP STORAGE TEMPERATURE TSTG MIN 0 MAX V -21.0 V 0 7.0 V 0 50 °C -20 70 °C RLED + RH L C M 5V Pin Connections VLCD A VSS K + RL VL 15V RH+RL = 10 ~ 20KΩ Electrical Characteristics (VDD=5.0±0.25V 25°C) PARAMETER SYM PIN NO. SYMBOL 1 VSS 0V Ground FUNCTION 2 VDD 5V Power supply for logic 3 VL - Operating voltage for LC 4 WR L Data write 5 RD L Data read 6 CE L Chip enable 7 CD H/L H=Command, L=Data 8 RESET L Reset CONDITION MIN TYP MAX UNIT 9 DB0 H/L OPERATING VOLTAGE VDD - 4.5 5.0 5.5 V 10 DB1 H/L POWER SUPPLY FOR LCD VDD-VL - 16.7 17.7 18.6 V 11 DB2 H/L INPUT HIGH VOLTAGE VIH - VDD -2.2 - VDD V 12 DB3 H/L 13 DB4 H/L INPUT LOW VOLTAGE VIL - 0 - 0.8 V 14 DB5 H/L OUTPUT HIGH VOLTAGE VOH IOH=0.2mA VDD -0.4 - VDD V 15 DB6 H/L 16 DB7 H/L Data bus OUTPUT LOW VOLTAGE VOL IOL=1.2mA 0 - 0.4 V 17 FS H/L Font select POWER SUPPLY CURRENT IDD VDD=5.0V - - 4.0 mA 18 N/C - No connection LED CURRENT ILED VLED=4.2V 160 250 320 mA 19 K - LED Backlight 20 A - LED Backlight DRIVE METHOD 1/128 Duty Page 16 UNIT 7.0