HDM32GS12Y-3 Dimensional Drawing 2.7 4.4 0.8 4.0 1.25 0.2 2.5 7.0 0.45 16.05 19 BACK SIDE (IC SIDE) 2.0 0.8 20 1.2 1.25X17=21.25 26.5 12.0 27.1 18.5 15.6 2-∅1.0 2.0 1.2 9.05 1 7.55 4.3 3.43 MAX 6.0 0.7 65.1±0.5 60.5 53.65 2.3 1.43 122 X 32 Dots Graphic, Small Size 18 PARTS AREA 8.4 4-R1.0 0.4 0.04 CONNECTOR INFORMATION: CONNECTION IS VIA 1.25mm PITCH FFC ONLY 0.04 8.4 5.9 65.8±0.5 0.45 64.5 SEATING PLANE 2.0 2.0 62.5 Dimension tolerance: +/-0.3mm Features Features Backlight................................................................EL Optional Options...............................................Gray STN / Yellow STN Normal/Extended Temperature Bottom / Top Viewing Built-in Controller..............................................SED1520DAA Absolute Maximum Ratings PARAMETER SYMBOL SUPPLY VOLTAGE MIN VDD-VSS 0 MAX V INPUT VOLTAGE VIN - 6.3 V OPERATING TEMPERATURE TOP 0 50 °C STORAGE TEMPERATURE TSTG -20 70 °C Physical Data Module Size.......................................65.8W x 27.1H x 8.4 mm Viewing Area Size......................................60.5W x 18.5H mm Dot Pitch.....................................................0.44W x 0.49H mm Dot Size......................................................0.40W x 0.45H mm Weight.................................................................................19g Pin Connections Power Supply VDD + RH L C M 5V VLCD VSS + RL VL 5V RH+RL = 10 ~ 20KΩ Electrical Characteristics (VDD=5.0±0.25V 25°C) PARAMETER INPUT HIGH VOLTAGE INPUT LOW VOLTAGE SYM VIH VIL SYMBOL A∅ H/L L=Instruction, H=Data FUNCTION 2 CS2 L Chip select 3 CS1 L Chip select 4 CL H/L External clock (2kHz) 5 RD(E) - RD (80 series), E (68 series) 6 WR (R/W) - WR (80 series), R/W (68 series) 7 VSS 0V Ground 8 DB0 H/L 9 DB1 H/L 10 DB2 H/L 11 DB3 H/L 12 DB4 H/L 13 DB5 H/L H/L Data bus CONDITION MIN TYP MAX UNIT 14 DB6 0.8 VDD - - V 15 DB7 H/L 16 5V - - VDD 17 RES H/L L=80 series, H=68 series 18 VL - Operating voltage for LC 19 VEL - 20 VEL - 0.2 VDD V POWER SUPPLY CURRENT IDD VDD=5.0V - - 1.5 mA POWER SUPPLY FOR LCD VDD-VL TA=25°C 4.5 - 6.5 V DRIVE METHOD PIN NO. 1 - 1/32 DUTY UNIT 6.3 Page 10 Power supply for logic Power supply for EL backlight