! NEW HDT Series Micro Mini Surface Mount Detect Switches Features/Benefits • Low profile package sits just 3,35 mm off PCB • Design allows top or side actuation • Low actuation force, 35 grams max. • Pick and place compatible, available in Typical Applications • Consumer electronics • Computers • Medical devices tape & reel packaging • RoHS compliant and compatible Specifications Materials CONTACT RATING: 1 mA 5 VDC BASE: PA 46 MECHANICAL AND ELECTRICAL LIFE: 100,000 cycles min. COVER: PA 46 CONTACT RESISTANCE: 500 m Ω max. initial. ACTUATOR: PA 46 INSULATION RESISTANCE: 100 M Ω min. between adjacent contacts. MOVABLE BLADE: Phosphor bronze, silver plated. TERMINALS: Phosphor bronze, silver plated. OPERATING TEMPERATURE: -15ºC to +70ºC STORAGE TEMPERATURE: -20ºC to +75ºC NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. PACKAGING: Tape & reel, 2,450 per reel. TRAVEL: Pre-travel Overtravel: Total: NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. .30 mm .75 mm 1.05 mm Build-A-Switch Complete part numbers for HDT Series are shown below. PART NUMBER PACKAGING HDT0001 TAPE & REEL SCHEMATIC HDT0001 PC MOUNTING NOTE: Available with no locating posts by adding “NP” (HDT0001NP) to Part Number. F Detect TAPE & REEL Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F-3 www.ittcannon.com