KDS Series Intrusion Switches Features/Benefits • Slot mount into chassis to Typical Applications • Intrusion/Alarm switch in reduce installation cost • Wire harness length & connector easily customized • Available in N.O. or N.C. configuration • RoHS compliant network desktop PC • Intrusion/Alarm switch in telecommunication equipment • Intrusion/Alarm switch in cellular base station Specifications Materials CONTACT RATING: 0.4 VA max. @ 20 V AC or DC. HOUSING: Nylon 6/6 (UL 94V-0) MECHANICAL & ELECTRICAL LIFE: 10,000 actuations min. at full load. ACTUATOR: Nylon 6/6 (UL 94V-0) CONTACT RESISTANCE: 200 m Ω max. initial @ 2-4 V DC, 100mA. INSULATION RESISTANCE: 109 Ω min. MOVABLE CONTACT: Copper alloy, gold plate over nickel plate. FIXED CONTACT: Brass, gold plate over nickel plate. WIRE: UL 1061-24 AWG. OPERATING TEMPERATURE: –40ºC to +85ºC TRAVEL: Pretravel: 0.050 max. Overtravel: 0.375 ±.025" DIELECTRIC STRENGTH: 500 Vrms min. @ sea level. NOTE: For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. PACKAGING: Bulk packaging. How To Order Complete part numbers for KDS Series Switches are shown below. SWITCH FUNCTION POS. 1 POS. 2 PART NUMBER SCHEMATIC .400 (10,16) KDS11 OFF MOM. SPST N.O. SPST N.O. KDS33 ON MOM. SPST SPSTN.C. N.C. KDS33 .600 (15,24) .350 (8,89) .380 (9,65) .300 (7,62) Detect F .181 DIA. (4,60ø) .488 (12,39) .710 (18,03) 12.00±0.50 (304,8±12,7) PANEL CUT-OUT (THICKNESS .040) Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F–20 www.ittcannon.com