SKYWORKS PD16-73LF

DATA SHEET
PD16-73LF: Two-Way 0° Power Splitter
Combiner 1.42–1.66 GHz
Features
Low cost
Low profile
● Available in small SOT-6 lead package
● Available on tape and reel
● Footprint consistent with other parts in the “PD” series
● Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C
per JEDEC J-STD-020
●
SO
T-6
●
SOT
-6
-6
SOT
SOT
-6
Description
The PD16-73LF is a monolithic two-way in-phase hybrid junction
tuned for the 1.42–1.66 GHz band. It offers low loss, high
isolation, good input/output matching and exceptional phase/
amplitude balance. It is available in the SOT-6 lead surface
mount package. The footprint of the PD16-73LF is the same as
the other power dividers in this package style and series to
allow for consistent assembly setup.
NEW
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances)-compliant packaging.
Electrical Specifications at 25 °C
Parameter
Min.
Frequency
Typ.
1.42
Insertion loss less 3 dB split
Max.
Unit
1.66
GHz
0.6
dB
0.4
Isolation
18
23
dB
Input VSWR
1.2:1
1.5:1
Output VSWR
1.2:1
1.4:1
Amplitude balance
±0.1
±0.2
dB
±1
±3
Deg.
Phase balance
Pin Out
Block Diagram
6
GND
5
IN/SUM
4
3
Port 2
2
GND
1
Port 1
GND
Port 1
IN/SUM
Port 2
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200516 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
1
DATA SHEET • PD16-73LF
Typical Performance Data
1.5
1.4
-2.5
-3.0
Port 1
-3.5
Output VSWR
Insertion Loss (dB)
-2.0
Port 2
1.3
1.2
Port 2
1.1
Port 1
-4.0
1.40
1.45
1.50
1.55
1.60
1.65
1.0
1.40
1.70
1.45
Insertion Loss vs. Frequency
1.55
1.60
1.65
1.70
Output VSWR vs. Frequency
0.10
0
Amp. Balance (dB)
-10
Isolation (dB)
1.50
Frequency (GHz)
Frequency (GHz)
-20
-30
0.05
0
-0.05
-40
-50
1.40
1.45
1.50
1.55
1.60
1.65
-0.1
1.40
1.70
1.45
1.60
1.65
0
1.5
Phase Balance (Deg.)
1.4
1.3
1.2
1.1
1.45
1.50
1.55
1.60
1.65
Frequency (GHz)
Input VSWR vs. Frequency
1.70
-0.5
-1.0
-1.5
-2.0
1.40
1.45
1.50
1.55
1.60
1.65
Frequency (GHz)
Phase Balance vs. Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
2
1.70
Amp. Balance vs. Frequency
Isolation vs. Frequency
Input VSWR
1.55
Frequency (GHz)
Frequency (GHz)
1.0
1.40
1.50
June 8, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200516 Rev. A
1.70
DATA SHEET • PD16-73LF
Absolute Maximum Ratings
Characteristic
SOT-6
Value
power(1)
1.5 W CW
Input power(2)
0.75 CW
Input
Operating temperature
-40 °C to +85 °C
Storage temperature
-65 °C to +15 0°C
1. When used as a power divider with a 2.0:1 maximum VSWR on all ports.
2. When used as a power combiner with a 2.0:1 maximum VSWR on all ports.
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
CAUTION: Although this device is designed to be as robust as
possible, ESD (Electrostatic Discharge) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce potentials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
0.071 (1.80 mm)
0.052 (1.30 mm)
Pin 1
Indicator
Pin 1
0.037 (0.95 mm) Ref.
0.020 (0.51 mm)
0.014 (0.350 mm)
0.006
(0.15 mm)
0.000
(0.00 mm)
0.057 (1.45 mm)
0.035 (0.90 mm)
5.0° ± 1°
5.0° ± 1°
0.122 (3.10 mm)
0.106 (2.70 mm)
0.012
(0.30 mm)
Typ.
0.014
(0.26 mm)
0.004
(0.10 mm)
0.022 (0.61 mm)
0.004 (0.10 mm)
Recommended Solder Reflow Profiles
Tape and Reel Information
0.075
0.015 Typ.
0.039 Typ.
0.126 (3.20 mm)
0.087 (2.20 mm)
Pin 6
Refer to the “Recommended Solder Reflow Profile”
Application Note.
Recommended Board Layout
0.018 Typ.
0.074
(1.90 mm) Ref.
Refer to the “Discrete Devices and IC Switch/Attenuators
Tape and Reel Package Orientation” Application Note.
0.020 Dia.
Via 3 Places
Material is 10 mil FR4
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
200516 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006
3
DATA SHEET • PD16-73LF
Copyright © 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and
names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
4
June 8, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200516 Rev. A