OCXO OCXO SERIES 9400 " " FEATURES APPLICATIONS Excellent frequency stability High Frequency up to 100MHz Low Profile - TELECOM - BASE STATION - INSTRUMENTATION ELECTRICAL PERFORMANCE PARAMETER Supply voltage, nom. Power dissipation steady state Heat up power Heat up time. Frequency range Frequency Adjustment: Electrical (0 to 5V) Electrical (0 to 10V) Freq. stability vs. temperature LX: 0°C to 60°C FZ: -30°C to 70°C Freq. stability vs. supply changes Freq. stability vs. load changes Long term stability (Aging) OCXO SERIES 9400 AT CUT CRYSTAL SC CUT CRYSTAL 12V, 5V,3.3V ±5% Standard 2 Watt Max. 5 Watt Max. 5 min Max 10 To 100MHz Standard ±10PPM Min ±15PPM Min ±0.7PPM Min ±1PPM Min ±0.05 PPM ±0.010 PPM ±0.15 PPM ±0.020 PPM (Standard, contact factory for different temp ranges and stabilities) ±0.01 PPM Max for ±5% Change ±0.005 PPM Max for ±5% Change ±0.005 PPM Max for ±5% Change ±0.002 PPM Max for ±5% Change ± 0.5 PPM Max for 1 Years ±0.1 PPM Max for 1 Years ±0.005 PPM/Day Max. ±0.002 PPM/Day Max. Output HCMOS/TTL/Sine 0 to +10dBm Harmonics, Sub Harmonics -30dBc(Sine Output) Spurious -75dBc(Sine Output) Duty cycle 40/60% to 60/40%(HCMOS) Rise / fall time 10nS Max. (HCMOS,10%~90%Vout, 90%~10%Vout) Short term Stability (10MHz) 1 E-10 /Sec 5 E-11 /Sec Phase Noise typical under Offset Phase Noise Offset Phase Noise static conditions 10Hz -95 dBc/Hz 10Hz -115 dBc/Hz (Sine Output 10MHZ) 100Hz -125 dBc/Hz 100Hz -135 dBc/Hz 1000Hz -135 dBc/Hz 1000Hz -145 dBc/Hz 10000Hz -150 dBc/Hz 10000Hz -150 dBc/Hz Note: All Typical parameters for a 10MHz output and 5V Supply, for different frequencies consult factory RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: +001(305) 593-6033 ! fax: +001(305)594-3973 ! e-mail: [email protected] ! internet: http:/www.raltron.com OCXO " HOW TO ORDER (PART NUMBER) Prefix Output Type Cut Type Series OX 1:TTL 2:HCMOS 3:ACMOS 4:LVCMOS 6:SINE 0:AT (No Vcontrol ) 1: SC (No Vcontrol ) 4: AT (Elect Vcontrol) 5: SC (Elect Vcontrol) 94: 9400 Revision A Temperature Range First letter Lowest Temperature, Second letter Highest Temperature: From A=-55°C to Z=+70°C, Then: 1=+75°C, 2=+80°C, 3=+85°C… in 5°C steps Example: LZ: +0°C to +70°C LX: +0°C to +60°C FZ: -30°C to +70°C D3: -40°C to +85°C Stability Frequency Supply Voltage Value x 10E-2 in PPM In MHZ 3.3; 3.3V 5: 5.0V 12; 12V Example 28= 0.28PPM 10= 0.1PPM Example: OX6494A-LZ-10-100.000-12 VCC=12Vdc Frequency 100 MHz Temp Stability = 10 x 10E-2 = ±0.1 PPM Operating Temp Range = 0°C to +70°C Revision "A" SERIES 9400 AT Cut crystal, Electrical frequency control Output Sine Wave Prefix: OCXO " MECHANICAL SPECIFICATION HEIGHT, MAX. “H”: 0.53” / 13.5 mm OUTLINE TOLERANCE: ±0.015” / 0.4mm PIN FUNCTIONS: [1] CASE / GROUND [2] SUPPLY VOLTAGE [3] RF OUTPUT [4] CONTROL VOLTAGE NOTE: DENOTES PIN 1 LOCATION RALTRON ELECTRONICS CORP. ! 10651 N.W . 19 th St ! Miami, Florida 33172 ! U.S.A. phone: +001(305) 593-6033 ! fax: +001(305)594-3973 ! e-mail: [email protected] ! internet: http:/www.raltron.com