14 Pin DIP Package HTFLxx Series HTVLxx Series HTFHxx Series HTVHxx Series TCXO / VCTCXO 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description The Connor Winfield 14 Pin DIP Temperature Compensated Crystal Controlled Oscillators (TCXO series) and Voltage Controlled Temperature Compensated Crystal Controlled Oscillators (VCTCXO series) are designed for use in applications where high frequency stability performance is required. Through the use of Analog Temperature Compensation this device is capable of holding sub 1ppm stabilities over the commercial or the industrial temperature ranges. Many features are available to meet your design requirements. Features: Available RoHS Options: RoHS Compliant / Lead Free RoHS Compliant / Terminations Contain Lead Fixed Frequency with Tr-State E/D (TCXO) or Voltage Controlled (VCTCXO) Available Supply Voltages:3.3v or 5.0v Low Jitter >1ps Rms Available Frequency Stabilities: 6.4 Mhz to 50 Mhz, 0.28 Ppm pk-pk, ±0.20 ppm, ±0.25 ppm, ±0.28 ppm, ±0.50 ppm, ±1.00 ppm, ±2.50 ppm, ±4.60 ppm Available Frequency Stabilities: >50 Mhz to 156.25 Mhz, ±0.50 ppm ±1.00 ppm, ±2.50 ppm, ±4.60 ppm Available Temperature Ranges: 0 to 70°C or -40 To 85°C Tri-State Enable / Disable Function or Voltage Control Pin 1 Hermetically Sealed 14 Pin Dip Package Absolute Maximum Ratings Table 1.0 Parameter Storage Temperature Minimum Nominal Maximum Units -55 - 125 °C Supply Voltage (Vcc) -0.5 - 6.0 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.6 Vdc Notes Ordering Information Bulletin Page Revision Date Tx137 1 of 4 05 08 January 2008 HTFL6D - 12.800 MHz TCXO SERIES Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation CENTER FREQUENCY 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Operating Specifications Table 2.0 Parameter Center Freq (See Table 8) (Fo) Minimum 6.40 Units MHz Notes Frequency Calibration – All Models -1.0 1.0 Frequency Stability vs. Temperature ±[(Fmax-Fmin)/2] (See Table 8) ppm 1 2 Freq. Stability vs. Voltage - All Models Total Frequency Tolerance – HTxxxA through HTxxxF Total Frequency Tolerance – HTxxxG - - ±0.20 ppm 3 - - ±4.6 ±6.1 ppm ppm 4 4 Total Frequency Tolerance – HTxxxH Aging (20 years) – All Models - - ±20.0 ±3.0 ppm ppm 4 - 70 85 °C °C 3.300 5.00 6 3.465 5.25 10 Vdc Vdc mA Operating Temperature Range (See Table 8) Model: HTxx5x- Series 0 Model: HTxx6x- Series -40 Supply Voltage (See Table 7) Model: HTFLxx or HTVLxx - Series (Vcc) 3.135 Model: HTFHxx or HTVHxx - Series (Vcc) 4.75 Supply Current (6.4 to 50 MHz) (Icc) - Nominal - Maximum 156.25 Supply Current (>50 to 156.25MHz) (Icc) Phase Jitter (BW =12KHz to Fo/2) - 9 - 25 1 mA pS RMS Phase Jitter (BW =10Hz to Fo/2) Period Jitter - - 3 3 pS RMS pS RMS SSB Phase Noise at 1Hz offset SSB Phase Noise at 10 Hz offset - -50 -80 - dBc/Hz dBc/Hz SSB Phase Noise at 100 Hz offset SSB Phase Noise at 1 KHz offset - -110 -135 - dBc/Hz dBc/Hz SSB Phase Noise at 10K Hz offset SSB Phase Noise at 100 KHz offset - -150 -150 - dBc/Hz dBc/Hz Start-Up Time: Oscillator TDEV @ 1 second - - 10 1.0 mS nS TDEV @ 4 seconds - - 2.0 nS Nominal Maximum Units Notes: 1) Initial calibration @ 25°C. Specifications at time of shipment after 48 hours of operation. 2) Frequency stability vs. change in temperature. ±[(Fmax-Fmin)/2], where the Fmax and Fmin values are in ppm. 3) Frequency stability for a +/- 5% supply voltage change. 4) Inclusive of calibration, operating temperature range, supply voltage change, shock and vibration and aging (20 years). 5) Oscillator output is enabled with no connection on pin 1. Output is at high impedance when disabled. Input Characteristics for VCTCXO Models Table 3.0 Parameter Minimum Control Voltage Range (Vcc = 3.3V) (Vc) 0.3 1.65 3.0 Vdc Control Voltage Range (Vcc = 5.0V) (Vc) 0.5 2.5 4.5 Vdc Frequency Tuning ±10 - - ppm Linearity ±1 - - % - - Ohm Slope Positive Input Resistance >100K Notes Input Characteristics for TCXO Models Table 4.0 Parameter Minimum Nominal Maximum Units Notes Enable Voltage (High) (Vih) > 70% Vdd - - Vdc 5 Page Disable Voltage (Low) (Vil) - - < 30% Vdd Vdc 5 Revision Bulletin Date Specifications subject to change without notice. All dimensions in inches. © Copyright 1998 The Connor-Winfield Corporation Tx137 2 of 4 05 08 January 2008 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com HCMOS Output Characteristics Table 5.0 Parameter Minimum Nominal Maximum Units - - 15 pF 90%Vcc - - 10%Vcc V V Drive Current for 6.4 to 52 MHz (High) (loh) (Low) (lol) -4 - - 4 mA mA Output Voltage >52 MHz Vcc=3.3Vdc Voltage: (High) (Voh) (Low) (Vol) 2.0 - - 0.4 V V Output Voltage >52 MHz Vcc=5.0Vdc Voltage: (High) (Voh) (Low) (Vol) 2.4 - - 0.4 V V Drive Current >52 MHz (High) (Ioh) (Low) (Iol) -8 - - 8 mA mA Duty Cycle at 50% of Vcc 45 50 55 % - - 8 nS LOAD Output Voltage 6.4 to 52 MHz Voltage: (High) (Voh) (Low) (Vol) Rise / Fall Time 10% to 90% Notes Package Characteristics Table 6.0 Package Hermetically sealed, 14 Pin DIP metal package Process Recommendation Solder Reflow Products suitable for convection reflow soldering. Peak temperature 260°C. Maximum time above 220°C, 20 seconds Model Number Select Table Table 7.0 Fixed Frequency Models Voltage Controlled Models SupplyVoltage Output LogicTyp HTFLxx HTVLxx 3.3 Vdc HCMOS HTFHxx HTVHxx 5.0 Vdc HCMOS xx — Add the frequency vs. temperature range to the end of the model number. Frequency vs. Temperature Range Table 8.0 Select TableFrequency Range: 6.4 to 50 MHz Operating Temperature Ranges 0.28 ppm pk-pk* ±0.20 ppm *** ±0.25 ppm *** ±0.28 ppm *** ±0.50 ppm *** ±1.00 ppm *** ±2.50 ppm *** ±4.60 ppm *** 0 to 70°C 5A 5B 5C 5D 5E 5F 5G 5H -40 to 85°C ** ** ** 6D 6E 6F 6G 6H Tx137 3 of 4 05 08 January 2008 Select TableFrequency Range: >50 to 155.52 MHz Operating Temperature Ranges +0.50 ppm *** ±1.00 ppm *** ±2.50 ppm *** ±4.60 ppm *** 0 to 70°C 5E 5F 5G 5H Bulletin -40 to 85°C ** 6F 6G 6H Page * — Frequency vs. temperature, absolute. ** — Frequency stabilities not available at -40 to 85°C *** — ±[(Fmax-Fmin)/2], where the Fmax and Fmin values are in ppm. Revision Date 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Package Dimensions Table 9.0 Pin 1 7 8 14 .310 MAX (7.87mm) Function E / D or Voltage Control Ground Output Vcc Dimensional Tolerance: ±0.005" (±0.2mm) ±0.02" (±0.5mm) RoHS 5/6 Solder Profile Temperature 225˚C Ramp-Up Rate 3˚C/second max. from 150˚C to 225˚C. 225˚C tp Ramp-Down Rate 6˚C/second max. 183˚C 150˚C 100˚C 25˚C Phase Noise Plot 0 Time 60-120s Max. Phase Noise Plot HTFL6D-012.8M 10-30s 60-150s Max. 360 Sec. Max. RoHS Solder Profile Order Information Specifications HTVH 5D G5 – 020.0M Model Number, Fixed or Voltage Controlled Output, Supply Voltage - Code Frequency Stability vs. Temperature Range - Code G5 = RoHS 5/6 Compliant / Terminations Contain Lead Blank = RoHS Compliant / Lead Free Output Frequency Output Waveform HTVH5DG5-020.0M = 20 MHz MHz, Voltage Controlled VCTCXO, 5.0V, HCMOS, ±0.28ppm, 0 to 70˚C, RoHS 5/6 Compliant / Terminations contain lead. HTFL6D-012.8M = 12.8 MHz, Fixed Frequency TCXO, 3.3V, HCMOS, ±0.28ppm, -40 to 85˚C, RoHS Compliant / Lead Free TF TR "1" LEVEL 90% 50% Test Circuit 10% SYMMETRY Enable /Disable or Voltage Control 14 8 1 7 Bulletin Page Revision Date "0" LEVEL Tx137 4 of 4 05 08 January 2008