SURFACE MOUNT MICROPROCESSOR CRYSTAL FEATURES 1.6mm MAXIMUM HEIGHT LOW PROFILE SMALL SIZE SERIES L16A, B, C SPECIFICATIONS 10.00 MHz TO 40.00 MHz (FUNDAMENTAL) 40.00 MHz TO 100.00 MHz (THIRD OVERTONE) FREQUENCY RANGE FREQUENCY TOLERANCE AT 25°C ±50PPM MAXIMUM (±30 PPM AVAILABLE) FREQUENCY STABILITY OVER TEMPERATURE RANGE ±50PPM MAXIMUM (±30 PPM AVAILABLE) OPERATING TEMPERATURE RANGE -20°C TO +70°C STANDARD AGING (FIRST YEAR) ±5 PPM MAXIMUM STORAGE TEMPERATURE RANGE -40°C TO +85°C LOAD CAPACITANCE 10 pF TO 32 pF OR SERIES SHUNT CAPACITANCE 7 pF MAXIMUM EQUIVALENT SERIES RESISTANCE (ESR) 80 OHM MAXIMUM DRIVE LEVEL 10 TO 100 µW REFLOW CONDITIONS 240°C FOR 10 s MAXIMUM Scale none Dimension in mm inch OUTLINE DRAWINGS 5.0 7.0 4.6 .276 .181 2.4 .094 4.1 .161 0.5 .020 .100 1.4 .055 1.6 MAX L16A 2 2.54 2.2 .087 .063 MAX 1.6 MAX .063 MAX 1 SOLDER PATTERN 2.2 2.2 .087 .087 SOLDER PATTERN 2.2 .087 3 2.54 4.5 .177 4 .100 7.0 .276 2.0 .079 5.0 MARKING AREA .197 MARKING AREA .197 TOP VIEW 6.4 .252 L16B SOLDER REFLOW PROFILE 1.2 .047 REFLOW TEMPERATURE 2.54 5.08 .200 7.0 .276 .100 5.0 MARKING AREA .197 240 °C 160 °C PREHEATING COOLING 150 °C SOLDER PATTERN 2.6 .102 2.4 2.4 .094 .094 25 °C 60 10 TIME (SECONDS) CARRIER TAPE DIMENSIONS .217 ± .004 1.5 ± 0.3 DIA .059 ± .012 DIA .315 ± .004 .630 ± .008 8.5 ± 0.1 16.0 ± 0.2 8.0 ± 0.1 7.5 ± 0.1 5.5 ± 0.1 .295 ± .004 180mm REEL DIAMETER,16mm TAPE WIDTH, 8mm PITCH QUANTITY: 1000 PIECES PER REEL .335 ± .004 PACKAGING 1.75 ± 0.1 .069 ± .004 4.0 ± 0.1 .16 ± .004 2.2 .087 L16C 1.5 ± 0.1DIA .059 ± .004 DIA 2.2 .087 .063 MAX 2.2 .087 1.6 MAX 2.2 ± 0.1 .090 ± .004 EXAMPLE: L16A-35.2512-18-T Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A. Tel: 305-593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http://www.raltron.com