SURFACE MOUNT MICROPROCESSOR CRYSTAL SERIES H160A FEATURES LOW COST SMD PACKAGE 1.6 mm THICKNESS FUNDAMENTAL FREQUENCIES TO 70.00 MHz SPECIFICATIONS SERIES H160A FREQUENCY RANGE TABLE 1 12.00 MHz TO 70.00 MHz FREQUENCY TOLERANCE AT 25° C* ±100 PPM MAXIMUM (±50 PPM AVAILABLE) FREQUENCY STABILITY OVER TEMPERATURE* ±100 PPM MAXIMUM (±50 PPM AVAILABLE) -10° C TO +70° C STANDARD -40°C TO +85°C EXTENDED (AVAILABLE) OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE -40° C TO +85° C AGING FREQUENCY RANGE (FUNDAMENTAL) ESR MAX 10.0 MHz TO 11.9 MHz 60 OHMS 12.0 MHz TO 13.9 MHz 50 OHMS 14.0 MHz TO 15.9 MHz 45 OHMS 16.0 MHz TO 19.9 MHz 40 OHMS 20.0 MHz TO 24.9 MHz 30 OHMS 25 OHMS ±5 PPM PER YEAR MAXIMUM LOAD CAPACITANCE 10 pF TO 32 pF OR SERIES SHUNT CAPACITANCE 7 pF MAXIMUM 25.0 MHz TO 40.0 MHz DRIVE LEVEL SEE TABLE 1 EQUIVALENT SERIES RESISTANCE (ESR) SEE TABLE 2 FREQUENCY RANGE (3rd OVERTONE) ±5 PPM MAXIMUM 75 cm DROP TEST IN 3 AXES ONTO A HARD SURFACE SHOCK RESISTANCE FREQUENCY 10 TO 55 Hz AMPLITUDE 1.5 mm FOR 30 MIN IN 3 AXES VIBRATION RESISTANCE REFLOW CONDITIONS 40.001 MHz TO 49.9 MHz 90 OHMS 50.0 MHz TO 70.0 MHz 80 OHMS 260° C FOR 10 s MAXIMUM * CONSULT RALTRON FOR TIGHTER STABILITY AND TOLERANCE TABLE 2 Scale none Dimension in [mm/inch] SOLDER PATTERN .094 2.8 2.0 TO 500 µW 16.00 MHz TO 24.9MHz 2.0 TO 300 µW 25.00 MHz TO 31.9MHz 2.0 TO 100 µW 32.00 MHz TO 70.00 MHz 2.0 TO 300 µW CARRIER TAPE DIMENSIONS 1.5 ± 0.1 DIA .059 ± .004 DIA 2.0 ± 0.1 .079 ± .004 4.0 ± 0.1 .157 ± .004 PEAK - 10 SECONDS MAX 260 °C 255 °C TEMPERATURE 7.5 ± 0.1 SOLDER REFLOW PROFILE 20-40 s 217°C 200°C 8.4 ±0.10 .331±.004 .165 12.00 MHz TO 15.9MHz 16 ± 0.3 .630 ± .012 2.4 .110 2.8 4.2 .110 1.5 .06 .08 2.0 2.4 .094 DRIVE LEVEL 1.75 ± 0.1 .069 ± .004 8.0 ± 0.3 .315 ± .012 FREQUENCY RANGE .295 ± .004 1.6 MAX MARKING AREA .063 MAX 4.5 ± 0.3 .177 ± .012 OUTLINE DRAWING -6°C/s MAX 60 TO 90 s 150°C 4.8±0.1 .189±.004 COOLING +3°C/s MAX PREHEATING 2.1 ± 0.1 .083 ± .004 8.0 ± 0.1 .315 ± .004 PACKAGING 250 mm REEL DIAMETER 16 mm TAPE WIDTH 8 mm PITCH QUANTITY: 1000 PIECES PER REEL 25 °C 60 TO 120 s 60 TO 120 s TIME (SECONDS) PART NUMBERING SYSTEM HOLDER TYPE FREQUENCY - H160A LOAD CAPACITANCE IN MHz MODE - 12 TO 32 pF FOR PARALLEL S FOR SERIES F 3OT FUNDAMENTAL THIRD OVERTONE EXTENDED TEMPERATURE TOLERANCE / STABILITY (PPM/PPM) EXAMPLES: 2525, 2550 TAPE AND REEL - EXT TR EXAMPLE: H160A-40.000-30-F-2525-EXT-TR Raltron Electronics Corporation 10651 NW 19th St. Miami, Florida 33172 U.S.A. Tel: 305-593-6033 Fax: 305-594-3973 e-mail: [email protected] Internet: http://www.raltron.com