LX9508 L I N F I N I T Y Input Cable Assembly D I V I S I O N KEY FEATURES DESCRIPTION 18-inch (457mm) lengths of UL1061 AWG#26 wire. This cable assembly is designed to save users the job of obtaining housing, pin, wire, and crimp-tools in addition to the assembly of an evaluation board. It is also the same cable assembly provided with inverter samples that utilize the Molex* wire-to-board connectors. Used for Interconnection of Backlight Inverter Connector (Molex 53261) to Power, Ground, and Control Signal Generous 18-inch (457mm) Lead Length to accommodate Most Applications Pre-Stripped Ends Facilitate Ease of Hook-up Leads Color-Coded for Quick and Accurate Termination Wire is 300 Volt Rated to 80°C, PVC Insulated and is Stranded in a 7X #34 Configuration IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com WWW . Microsemi .C OM The LX9508 is an input-connector cable assembly that is used to connect Linfinity’s standard line of backlight inverter products. The connector housing is interconnectable and compatible with PC boards mounted with the Molex* 53261 series 12-pin SMT header. The housing and pins are crimp-terminated to PRODUCT HIGHLIGHT Strip & Retain 0.125in. ±0.020 3.17mm ±0.50 1 2 PIN 1 3 4 5 6 7 8 9 18.000in. ±0.250 457.20mm ±6.35 Item Description Molex* 51021 Series Molex* 50079 Series UL 1061, 26 AWG, Red Wire UL 1061, 26 AWG, Black Wire UL 1061, 26 AWG, Blue Wire UL 1061, 26 AWG, Orange Wire UL 1061, 26 AWG, Green Wire UL 1061, 26 AWG, White Wire UL 1061, 26 AWG, Violet Wire Pin # Color Coding 1-3 4-7 8 9 10 11 12 Red Black Blue Orange Green White Violet LX9508 1 2 3 4 5 6 7 8 9 * Molex is a Registered Trademark of Molex, Inc. MODEL ORDER INFO LX9508 Copyright © 2000 Rev. 1.1,2005-11-18 Microsemi Linfinity Microelectronics Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 1