A M I C R O S E M I LX9507 Input Cable Assembly C O M P A N Y PRODUCTION DATA SHEET 6-inch (152.4mm) lengths of UL1061 AWG#26 wire. This cable assembly is designed to save users the job of obtaining housing, pin, wire, and crimp-tools in addition to the assembly of an evaluation board. Used for Interconnection of Backlight Inverter Connector (Molex 53261) to Power, Ground, and Control Signal Generous 6-inch (152.4mm) Lead Length to accommodate Most Applications Leads Color-Coded for Quick and Accurate Termination Wire is 300 Volt Rated to 80°C, PVC Insulated and is Stranded in a 7X #34 Configuration W W W . Microsemi . COM The LX9507 is an input-connector cable assembly that is used to connect Linfinity’s standard line of backlight inverter products. The connector housing is interconnectable and compatible with PC boards mounted with the Molex* 53261 series 8-pin SMT header. The housing and pins are crimp-terminated to IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com 1 2 3 4 5 6 7 8 6.0 00in. ±0.250 152.4 0m m ±6.35 Molex* 51021 Series 1 Red 2 Molex* 50079 Series 2 Red 3 UL 1061, 26 AWG, Red Wire 3 Black 4 UL 1061, 26 AWG, Black Wire 4 Black 5 UL 1061, 26 AWG, Orange Wire 5 Orange 6 UL 1061, 26 AWG, Green Wire 6 Green 7 UL 1061, 26 AWG, White Wire 7 White 8 UL 1061, 26 AWG, Violet Wire 8 Violet LX9507 1 * Molex is a Registered Trademark of Molex, Inc. LX9507 Copyright 2000 Rev. 0.2,2000-09-22 Microsemi Linfinity Microelectronics Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 1