UPDS1045 10 Amp Schottky Barrier Rectifier PowerDI™ 5 SCOTTSDALE DIVISION APPEARANCE The UPDS1045 offers a small and powerful surface mount package for a 45 Volt 10 Amp rated Schottky with very low forward voltage and low leakage current. For critical applications requiring very fast switching, these Schottky higher reverse voltage ratings with their “hot carrier” features provide extremely fast switching to replace conventional ultrafast rectifiers. The very low thermal resistance of the PowerDI™5 package design permits cooler operating junction temperatures for minimal reverse leakage currents and lower power loss. PowerDI™5 IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • • • • • APPLICATIONS / BENEFITS • Silicon Schottky (hot carrier) rectifier for minimal trr and elimination of reverse-recovery oscillations to reduce need for EMI filtering • For use in high-frequency switching power supplies, inverters, free wheeling, polarity protection, and “O-Ring” applications • Low power loss and high efficiency • Robust package configuration for pick-and-place handling • Full-metallic bottom eliminates flux entrapment Guard ring die construction for transient protection Low power loss, high efficiency Low forward voltage drop Low reverse leakage current High junction temperature capability High forward surge current capability Environmentally friendly molding compound (no Br, Sb) Low inductive parasitics for minimal Ldi/dt effects Lead-Free Finish & RoHS Compliant per EU Directive Rev 13.2.2003 (glass and high temperature solder exemptions per Annex Notes 5 and 7 therein) MAXIMUM RATINGS • • • • • • MECHANICAL AND PACKAGING Junction and Storage Temperature (TJ, TSTG): -65 to +150oC Average Rectified Output Current (IO): 10 Amps for Single phase, half wave, 60Hz, resistive or inductive load (also see Figure 5). For capacitive load, derate current by 20%. Peak Repetitive Reverse Voltage (VRRM): 45 V Working Peak Reverse Voltage (VRWM): 45 V DC Blocking Voltage (VR): 45 V RMS Reverse Voltage (VR(RMS): 32 V Non-Repetitive Peak Forward Surge Current @ 8.3 ms Single half sine-wave Superimposed on Rated Load (IFSM): 275A • • • • • • • Case Material: Molded Plastic, Environmentally Friendly “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020C. Terminals: Finish – Matte Tin annealed over Copper lead frame ( per JESD97) Solderable per MIL-STD-202, Method 208 Marking: See marking information on page 3 Polarity: See diagram in “Dimensions & Schematic” (page 4) Weight: 0.096 grams (approx.) Tape & Reel Option: 5000/reel (13”) Thermal Resistance Junction to case bottom (RθJC) or o Soldering Point (RθJS): 0.8 C/W o o Thermal Resistance (RθJA): 85 C/W (Note 1), 70 C/W (Note 2), 40oC/W (Note 3) junction to ambient air (see last page) UPDS1045 • Notes: 1. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout (pg 4) 2. Polyimide PCB, 2 oz. Copper, minimum recommended pad layout (pg 4) 3. Polyimide PCB, 2 oz. Copper with larger Cathode pad dimensions 13.2 mm x 10.1 mm and Anode pad dimensions 4.0 mm x 2.2 mm Copyright © 2005 8-18-2005 REV 0 WWW . Microsemi .C OM DESCRIPTION Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 UPDS1045 10 Amp Schottky Barrier Rectifier PowerDI™ 5 SCOTTSDALE DIVISION Working Peak Reverse Voltage Part Number UPDS1045 Maximum RMS Voltage VRWM VR(RMS) Volts Volts 45 32 unless specified otherwise Minimum Reverse Breakdown Voltage (Note 1) VBR @ 1.0 mA VF @ 5A VF @ 10A Volts Volts 0.45 45 Maximum Forward Voltage (Note 3) Maximum Reverse Current (Note 1 & 2) Volts IR @ 35 V mA IR @ 45 V mA 0.51 0.3 0.6 Maximum Reverse Current IR (Note 1 & 2) 100oC 125oC IR @ IR @ 35 V 45 V mA mA 25 150 NOTE 1: Short duration test pulse used to minimize self-heating effect. NOTE 2: See Figures 2 & 3 for typical values at other voltages and temperatures. NOTE 3: See Figure 1 for typical values at various temperatures WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS @ 25oC GRAPHS UPDS1045 Copyright © 2005 8-18-2005 REV 0 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 UPDS1045 10 Amp Schottky Barrier Rectifier PowerDI™ 5 SCOTTSDALE DIVISION WWW . Microsemi .C OM Note 2 Note 1 UPDS1045 NOTE 1: NOTE 2: FR-4 PCB, 2 oz. Copper, minimum recommended pad layout (see mounting pad illustration) Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 18.8 mm x 14.4 mm. Anode pad dimensions 5.6 mm x 3.0 mm. Copyright © 2005 8-18-2005 REV 0 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 UPDS1045 10 Amp Schottky Barrier Rectifier PowerDI™ 5 SCOTTSDALE DIVISION WWW . Microsemi .C OM MARKING INFORMATION S1045 = Product type marking code. MSC = Manufacturers’ code marking YYWW = Date code marking YY = Last digit of year ex: 04 for 2004 WW = Week code 01 to 52 DIMENSIONS UPDS1045 PAD dimensions (mm) Z 6.6 X1 1.4 X2 3.6 Y1 0.8 Y2 4.7 C 3.87 E1 0.9 PowerDI™5 Copyright © 2005 8-18-2005 REV 0 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 4