MICROSEMI UPS5819E3

UPS5817e3 and UPS5819e3
POWERMITE 1™ SURFACE MOUNT
1 AMP 20 and 40 V SCHOTTKY RECTIFIERS
SCOTTSDALE DIVISION
APPEARANCE
The UPS5817e3 and UPS5819e3 offer a small and powerful surface mount
package that is RoHS compliant for a 1 Amp rated Schottky. These ratings
are found only in much larger packages. They are ideal for surface mount
applications that operate at high frequencies with their “hot carrier” features
that provide extremely fast switching. The very low thermal resistance of the
patented Powermite 1™ package design with a full metallic bottom and
unique locking tab act as an efficient heat path to a heat sink mounting permitting
cooler operating junction temperatures for minimal reverse leakage currents
and lower power loss. It is also ideal for automatic insertion equipment.
DO-216
Powermite 1™
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
•
•
•
•
•
•
APPLICATIONS / BENEFITS
Low profile DO-216 package (<1.1 mm)
RoHS compliant with e3 suffix part number
2
Small footprint area of 8.45 mm
Plastic package has Underwriters Laboratory
Flammability classification 94V-0
Unique locking tab on bottom acts as integral efficient
heat path to heat sink (mounting substrate)
Metal to silicon rectifier, majority carrier conduction
•
•
High current capability with low forward voltage
Guard-ring-die construction for transient protection
•
Silicon Schottky (hot carrier) rectifier for minimal trr
and minimal reverse recovery voltage
Elimination of reverse-recovery oscillations to
reduce need for EMI filtering
For use in high-frequency switching power supplies,
inverters, free wheeling, charge pump circuits and
polarity protection applications
Lower forward power loss and high efficiency
Low inductive parasitics (<2nH) for minimal Ldi/dt
effects
Robust package configuration for pick-and-place
handling
Full-metallic bottom eliminates flux entrapment
Small foot print with 0.100 x 0.160 inches (see
mounting pad details on last page)
•
•
•
•
•
•
•
MECHANICAL AND PACKAGING
MAXIMUM RATINGS
•
•
•
•
•
o
Storage temperature (TSTG): -55 C to +150 C
o
o
Operating junction temperature (TJ ): -55 C to +150 C
Average forward rectified current (IO) @TC=100oC: 1.0
Amp
Forward surge current (IFSM) 8.3 ms single half-sine
waveform superimposed on rated load (JEDEC
Method): 50 Amps
Thermal resistance junction to case (bottom): 10 oC/W
o
Thermal resistance (RθJA): 240 C/W on PCB with FR4
using 1 oz Copper and recommended mounting pad
size (see pad layout next page)
Solder temperatures: 260 ºC for 10 s (maximum)
Copyright © 2007
10-15-2007 REV D
•
•
•
•
•
•
•
Terminals: Copper with annealed matte-Tin plating
for RoHS compliance solderable per MIL-STD-750
method 2026 (consult factory for Tin-Lead plating.)
Polarity: Backside is cathode
Marking: UPS5817e3 marked with S17•
and UPS5819e3 marked with S19•
Molded epoxy package meets UL94V-0
Weight: 0.016 grams (approximate)
Tape & Reel option: 12 mm tape per EIA-481-B
3000 units on 7 inch reel and 12,000 on 13” reel
(add TR7 or TR13 respectively to part number)
See package dimensions on last page
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
UPS5817e3 &
UPS5819e3
•
•
o
WWW . Microsemi .C OM
DESCRIPTION
UPS5817e3 and UPS5819e3
POWERMITE 1™ SURFACE MOUNT
1 AMP 20 and 40 V SCHOTTKY RECTIFIERS
SCOTTSDALE DIVISION
WWW . Microsemi .C OM
ELECTRICAL CHARACTERISTICS (TA=25oC unless noted)
Working
Peak
Reverse
Voltage
VRWM
Part
Number
UPS5817e3
UPS5819e3
Maximum Forward Voltage
Maximum
Reverse Current
IR @ VRWM
Typical Junction
Capacitance @
VR = 5.0 V
VF @
1A
Volts
VF @ 3A
IR
CJ
Volts
VF @
0.1A
Volts
Volts
mA
pF
20
40
0.36
0.39
0.45
0.55
0.65
0.85
1
1
105
60
CHARTS AND GRAPHS
UPS5817e3 &
UPS5819e3
Copyright © 2007
10-15-2007 REV D
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 2
UPS5817e3 and UPS5819e3
POWERMITE 1™ SURFACE MOUNT
1 AMP 20 and 40 V SCHOTTKY RECTIFIERS
SCOTTSDALE DIVISION
WWW . Microsemi .C OM
UPS5817e3 &
UPS5819e3
Copyright © 2007
10-15-2007 REV D
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 3
UPS5817e3 and UPS5819e3
POWERMITE 1™ SURFACE MOUNT
1 AMP 20 and 40 V SCHOTTKY RECTIFIERS
SCOTTSDALE DIVISION
WWW . Microsemi .C OM
PACKAGE & PAD LAYOUT DIMENSIONS
DO-216 Package (All dimensions +/-.005 inches)
MOUNTING PAD (inches)
UPS5817e3 &
UPS5819e3
Copyright © 2007
10-15-2007 REV D
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 4