TPA Series Navigation Tact Switch for SMT Features/Benefits • One touch, 5 way switching • Distinctive tactile feel for scanning • • • • • • Navigation C and select functions Allows panel sealing Normally open momentary contacts Subminiature overall dimensions Push down to select possible in any position Pegs for better true positioning and improved strength relief RoHS compliant and compatible Typical Applications • Electronic devices requiring • • • • • • direct control on LCD display Cellular phones PDA Digital cameras GPS navigation systems Home entertainment systems Security Construction Electrical Silver Gold FUNCTION: Multi-directional momentary action CONTACT ARRANGEMENT: Make contact = SP, N.O. TERMINALS: Gullwing type for SMT IP50 MAXIMUM POWER: MAXIMUM VOLTAGE: MAXIMUM CURRENT DC: MINIMUM CURRENT DC: 1 VA 24 V 50 mA 1 mA 0.2 VA 24 V 10 mA 1 mA Mechanical DIELECTRIC STRENGTH: 250 Vrms CONTACT RESISTANCE, INITIAL: 200 mΩ INSULATION RESISTANCE (100 VDC): 100 mΩ BOUNCE TIME: < 10 ms SHAFT DISPLACEMENT: Orthogonal 4 horizontal directions Vertical Push down TRAVEL TO MAKE: Orthogonal 0.35 mm±0.15 mm Push to select 0.25 mm±0.15 mm OPERATING FORCE: Scanning Orthogonal 1.8 N ± 0.5 N Push to select Vertical 4.0 N ± 0.8 N MAXIMUM APPLIED FORCE: Horizontal 40 N Vertical 20 N LIFE EXPECTANCY: Scanning 200,000 operations in each direction Push to select 200,000 operations Environmental Silver Gold OPERATING TEMPERATURE: –40˚C to +85˚C –40˚C to +85˚C STORAGE TEMPERATURE: –40˚C to +85˚C –40˚C to +85˚C Process Compatible with infrared reflow, lead free soldering and pick and place SMT machines. Note: Specifications listed above are for switches with standard options. For information concerning design integration, please contact your local ITT representative. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. SWITCH T P A 1 G Navigation Select 3 Scanning 2 directions with selection 4 Scanning 4 directions without selection 5 Scanning 4 directions with selection P Pegs Termination G Gullwing RoHS compliant and compatible LFS Lead free silver LFG Lead free gold Contact Material 1 Silver 3 Gold Actuation Force 1 1.8 N scanning, 4 N selection Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–8 www.ittcannon.com TPA Series Navigation Tact Switch for SMT SERIES TPA SELECT Actuator rotation center 7 LEFT R 0,2 (.008) 0,8 (.031) ø3,4 approx. (.134) 0,8 (.031) ø4,0 (.157) 1 0,55±0,05 (.022±.002) F/D measurement point ( scanning ) D 2 D 1,0 (x7) (.039) 0,65±0,1 (x7) (.026.004) 0,1 A 70˚0'±5˚0' 2,725 (.1073) 1 (.393) R 0,17±0,05 (.007±.002) RIGHT 5,3 (.209) 0,52±0,02 (.020±.001) 8 (.315) 4,3 (.169) COMMON - 1 1.4 (.055) RIGHT 5 8±0,0 R 0,1 02) ±.0 (.007 COMMON - 2 ø0,9 (.035) 0,3 (.017) 1.5 (.059) DOWN - 4 PCB LAYOUT DOWN ø3,2 pick & place area (.126) 0,2 3,5 (.138) TPA 511GP WITH PEGS Actuator rotation center 0,55±0,05 (.022.002) 70˚0'±5˚0' F/D measurement point ( scanning ) 0,5 1,1 (.020) (.043) 0,5 (.020) 0,1 A 5,25 (.207) 2,7 (.106) ø0,9 (.035) 1,7 4,3 (.170) (.067) 2.6 0,5 (.102) (.020) 2,7 (.106) SELECT - 5 2,65 1 (.104) (.393) 1.4 (.055) UP 1,7 (.067) 1,14±0,02 (.045±.001) 1 (.393) ø6,0 (.024) LEFT - 7 COMMON - 2 UP - 3 7 LEFT 1 4 DOWN 5 SELECT 6 RIGHT 2 4,3 5,3 (.170) (.209) ø2,0 (.079) RIGHT - 6 8 (.315) RIGHT LEFT 3,5 (.138) 2,6 (.102) 2,7 (.106) A 2,725 (.1073) COUPE D-D ECHELLE 20 2,7 (.106) 8,05 (.317) 0,52±0,02 (.020±.001) 3,1 (.122) 0,4 mini 0,15 (.006) 2,7 (.106) 2,2 (.087) 0,05+0,05/-0,10 (.002+.002/-.004) 9,3 (.366) 5,325 (.2096) 1,0 (x7) (.039) ø6,0 ø9,0 (.024) (.035) 0,650,1 (x7) (.026.004) 1,5 (.059) ø1,950,03 (.077.001) 5 8±0,0 R 0,1 02) ±.0 (.007 2,7 (.106) 4,3 (.169) 5,0 (.197) Button snap in sleeve lowest position 90˚0'±2˚0' 0,1 R 0,17±0,05 (.007±.002) D 0,3 (.017) 1.5 (.059) 0.2 (.008) D 0,8 0,8 (.031) (.031) R 0,2 (.008) ø4,0 (.157) ø3,4 approx. (.134) 3 UP NOTA : 1 Maximum rotational play of the actuator ±3? 2 Measurement conditions to be defined 3 Shaft diameter at the top : 1,93±0,02 PCB LAYOUT COMMON - 1 DOWN - 4 DOWN ø3,2 pick & place area (.126) 0,2 3,5 (.138) Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–9 www.ittcannon.com www.ittcannon.com C Navigation ø2,0 (.079) UP - 3 RIGHT - 6 ø1,95±0,03 (.077±.001) 2,65 1 (.104) (.393) 2,7 (.106) SELECT - 5 LEFT 5,25 (.207) 2,7 (.106) ø6,0 (.024) 1,14±0,02 (.045±.001) 2,7 (.106) 1,7 (.067) LEFT - 7 0.2 (.008) UP 1,7 4,3 (.170) (.067) 2.6 0,5 (.102) (.020) 8,05 (.317) 5,325 (.2096) 3,5 (.138) 2,6 (.102) SCHEMATIC 4,3 (.169) 3,1 (.122) 0,4 mini (.016) 1,1 (.043) 0,15 (.006) 0,05+0,05/-0,10 (.002+.002/-.004) 2,7 (.106) 2,2 (.087) 90˚0'±2˚0' 9,3 (.366) 3 UP 5,0 (.197) Button snap in sleeve lowest position 0,1 4 DOWN 5 SELECT 6 RIGHT TPA Series Navigation Tact Switch for SMT NAVIGATION SELECT OPTION CODE ARRANGEMENT 3 4 5 Scanning 2 directions with selection Scanning 4 directions without selection Scanning 4 directions with selection ACTUATION FORCE 1 1.8 N SCANNING, 4 N SELECTION CONTACT MATERIAL OPTION CODE MATERIAL 1 3 SILVER GOLD * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. TERMINATION 0,15 (.006) GULLWING 0,650,1 (x7) (.026.004) 2,7 (.106) 9,3 (.366) 1,7 (.067) 4,3 (.169) G 2,6 (.102) Navigation C Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–10 www.ittcannon.com TPA Series Navigation Tact Switch for SMT TAPE & REEL 2 faces 8˚ max. 2,25 (.089) 2±0,05 (.079±.002) 12,0 (.472) ø1,5+0,1/-0,0 (.059+.004/-.000) ø1,5+0,25/-0,0 (.059+.010/-.000) 1,75 (.069) 0,1 B 2,5+0,15/-0,10 (.098+.006/-.004) 4,0 (.157) 7,5 (.295) B 1,55+0,10/-0,05 (.061+.004/-.002) 0,343±0,05 (.014±.002) 2±0,05 (.079±.002) 8,2 (.323) 16±0,3 (.63±0.012) 10,0 (.394) 4˚0' max. 5,3 (.209) 1,2 (.047) 6 faces at 15˚ max 0,1 A 8,4 (.331) A C Navigation Dimensions are shown: mm (inch) Specifications and dimensions subject to change C–11 www.ittcannon.com