DATASHEET 16V SMALL CELL MODULE FEATURES AND BENEFITS TYPICAL APPLICATIONS 16 V DC working voltage Individually balanced cells Compact, lightweight system Screw terminals Automotive subsystems Consumer electronics Portable power tools Renewable energy systems Short term UPS & telecom Wind pitch control PRODUCT SPECIFICATIONS ELECTRICAL Rated Capacitance BMOD0058 E016 B02 58 F 1 Minimum Capacitance, initial Maximum ESR DC, initial 58 F 1 22 mΩ 1 Rated Voltage Absolute Maximum Voltage 16 V 17 V 14 Maximum Continuous Current (ΔT = 15 C) o 12.0 ARMS 2 Maximum Continuous Current (ΔT = 40oC)2 19 ARMS Maximum Peak Current, 1 second (non repetitive) 200 A 3 Leakage Current, maximum (B02 Suffix - Passive Balancing) Maximum Series Voltage 4 25 mA 750 V TEMPERATURE Operating Temperature (Ambient temperature) Minimum -40oC Maximum 65oC Storage Temperature (Stored uncharged) Minimum -40oC Maximum 70oC Page 1 Document number: 1015371.5 maxwell.com DATASHEET 16V SMALL CELL MODULE PRODUCT SPECIFICATIONS (Cont’d) PHYSICAL BMOD0058 E016 B02 Mass, typical 0.63 kg Power Terminals M5 Thread Recommended Torque - Terminal 4 Nm Vibration Specification IEC60068-2-6 Shock Specification IEC60068-2-27, -29 Environmental Protection IP54 Cooling Natural Convection MONITORING / CELL VOLTAGE MANAGEMENT Internal Temperature Sensor N/A Temperature Interface N/A Cell Voltage Monitoring N/A Connector N/A Cell Voltage Management Passive POWER & ENERGY Usable Specific Power, Pd5 Impedance Match Specific Power, Pmax 2,200 W/kg 4,600 W/kg 6 Specific Energy, Emax7 Stored Energy 3.3 Wh/kg 2.1 Wh 8 LIFE High Temperature1 1,500 hours Capacitance Change 20% ESR Change 100% (at Rated Voltage & Maximum Operating Temperature) (% decrease from minimum initial value) (% increase from maximum initial value) Room Temperature1 10 years Capacitance Change 20% ESR Change 100% (at Rated Voltage & 25oC) (% decrease from minimum initial value) (% increase from maximum initial value) Page 2 Document number: 1015371.5 maxwell.com DATASHEET 16V SMALL CELL MODULE PRODUCT SPECIFICATIONS (Cont’d) BMOD0058 E016 B02 Cycle Life1,9 500,000 cycles Capacitance Change 20% ESR Change 100% Test Current 35 A (% decrease from minimum initial value) (% increase from maximum initial value) Shelf Life 1,10 2 years (Stored uncharged up to a maximum storage temperature) SAFETY Short Circuit Current, typical 730 A (Current possible with short circuit from rated voltage. Do not use as an operating current.) Factory High-Pot Test13 Not Required Certifications RoHS, UL810a (640 Volts) TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS Thermal Resistance (Rma, Module Case to Ambient), typical N/A Thermal Resistance (Rca, All Cell Cases to Ambient), typical 4.8oC/W Thermal Capacitance (Cth), typical 2 420 J/oC ESR AND CAPACITANCE VS TEMPERATURE 180% Capacitance DC ESR Percentage change from value at 25°C 170% 160% 150% 140% 130% 120% 110% 100% 90% 80% -60 -40 -20 0 20 40 60 Temperature (°C) Page 3 Document number: 1015371.5 maxwell.com 80 DATASHEET 16V SMALL CELL MODULE NOTES 1. Capacitance and ESRDC measured at 25°C per Document Number 1007239 available at www.maxwell.com. 2. Per Maxwell Document 1007239 available at www.maxwell.com. ½ CV 3. Maximum Peak current (1 sec) = C x ESRDC + 1 4. After 72 hours at 25°C and rated voltage. Initial leakage current can be higher. 0.12V2 5. Per IEC 62391-2, Pd = ESR x mass DC V2 6. Pmax = 4 x ESRDC x mass 7. Emax = ½ CV2 3,600 x mass MOUNTING RECOMMENDATIONS Recommended mounting screw M4. Maximum torque on mounting screws 4 Nm. All 6 mounting locations must be utilized to meet vibration specifications. Page 4 Document number: 1015371.5 maxwell.com 8. Estored = ½ CV2 3,600 9. Cycle per Document Number 1007239 available at www.maxwell.com. 10. No more than 10% decrease in capacitance from minimum initial capacitance or 50% increase in ESR from maximum initial ESR. 11. Tested at 1 kV DC. 12. For a given application, sufficient cooling must be provided to keep cell case temperatures below 65°. See Rth. 13. Duration = 60 seconds. Not intended as an operating parameter. 14. Absolute maximum voltage non repeated, not to exceed 1 second. MARKINGS Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, and serial number. ogies DATASHEET 16V SMALL CELL MODULE 3 4 5 6 7 8 BMOD0058 E016 76 12.2 31 36 4.5 H W 66.4 54.8 34 49 max. Terminal screws: M5 66.4 44.3 38.8 226 L max. Part Description BMOD0058 E016 L (±0.5mm) Dimensions (mm) W (±0.5m) H (±0.5mm) Package Quantity 226.5 49.5 76.0 10 CQ 1 TEB 1 Only for Customers General tolerances ISO 2768 mK, EN ISO 13920 Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. 1 SBE 1 EPM Please contact Maxwell Technologies directly for any Modif. technical specifications critical to application. All products featured on this Date Object datasheet are covered by the following U.S. patents and01their respective foreign counterparts: 7307830, 7203056, 7180726, 7027290, 02 7.352.558, 7.295.423, 7.090.946, 7.508.651, 7.492.571, 7.342.770, 6.643.119, 7.384.433, 7.147.674, 7.317.609, 7.495.349, 7.102.877. BMOD0058 03 Delivery condition: Cleaned and degreased part 04 Disposal to third persons or reproduction even in part, prohibited without writen authority from the compagny. 3 Maxwell Technologies, Inc. Global Headquarters 5271 Viewridge Court, Suite 100 San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 Page 5 4 Depart. Visa GiL DATE 16.11.09 Drawn Design Checked EPM xx.xx.xx Approuv. SBE xx.xx.xx Maxwell Technologies SA CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Document number: 1015371.5 Rte de Mon CH-1728 Ro Switzerland maxwell.com Material - Weight [Kg] 630 g SolidWorks / All dimensions in [mm] Maxwell Technologies, GmbH Brucker Strasse 21 D-82205 Gilching Germany Tel: +49 (0)8105 24 16 16 Fax: +49 (0)8105 24 16 19 Modif.: Drawing ref. BMOD0058 E016 B02 Customer Drawing Echelle: 1:2 Sheet format: A3 Maxwell Technologies, Inc. Shanghai Representative Office 13E, CR Times Square 500 Zhangyang Road, Pudong Shanghai 200122, P.R. China Tel: +86 21 5836 8780 Fax: +86 21 5836 8790 00