Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT753SMX-2 The ACT753SMX-2 is a 2 pad, high quality, low aging SMD Crystal in a ceramic base / metal lid package, seam welded for good long term reliability. The lid is grounded through the package to assist with EMI issues and the pads are gold plated. It's wide frequency range and frequency tolerance / stability options make the device ideal for many applications including Notebook, PCMCIA, Instrumentation, Microprocessor Systems & Communications Equipment. Specification Parameter Symbol Specification Frequency Range Frequency Tolerance Stability over temp range Temp Operating Range Temp Storage Range Equivalent Series Resistance Load Capacitance Shunt Capacitance Drive Level Insulation Resistance Aging fo Δf/fo Tc Topr Tstg ESR CL C0 DL IR Fa 8.00 ~ 120MHz ±10ppm ~ 50ppm ±10ppm ~ 30ppm -20 ~ +70°C to -40 ~+85°C -40 ~+85°C See table below 6 ~ 30pF, 18pF std. 7pF 100μW max 500MΩ min ±5ppm / year max Freq. Range ESR (Ω) max Condition @25°C Please specify Please specify @100V DC @25°C Mode (MHz) 8.0 ~ 10.0 80 Fundamental 10.1 ~ 15.9 60 Fundamental 16.0 ~ 45.0 40 Fundamental 32.0 ~ 120.0 80 Third Overtone 5.0 ± 0.2 7.0 ± 0.2 Dimensions in mm 1.3 Suggested Footprint 1.2 3.54 ± 0.13 4.6 2.2 1.2 2.54 ± 0.13 4.1 2.2 4.5 Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating Temperature & Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 1 of 2 Issue: 4 D2 Date: 17/08/04 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT753/SMX -2 TAPE & REEL SPECIFICATIONS Tape / Reel Dimensions ( Units in mm ) ACT753/SMX -2 SOLDERING SPECIFICATIONS Soldering Reflow Information Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Type, Stability, Operating Temperature Range, Supply Voltage. In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com Issue: 4 D2 Date: 17/08/04 2 of 2