Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] ACT225SMX-4 Only 2mm high and with a small footprint, the ACT225 is ideal for fitting on high density boards where height restriction is a constraint. This part offers good environmental and heat resisting characteristics due to the highly reliable ceramic package. These devices can be used in a wide range of applications including Communications & Audio Visual equipment, measuring Instruments and all manner of both portable and static products. Specification Parameter Symbol Frequency Range Frequency Tolerance Temp Operating Range Stability over Temp Range °C Temp Storage Range Equivalent Series Resistance Shunt Capacitance Load Capacitance Drive Level Insulation Resistance Reflow Aging (First Year) fo Δf/fo Topr Tc Tstg ESR C0 CL DL IR Fa Specification Condition 3.5MHz ~ 30MHz ±30ppm & 50ppm -40°C ~ +85°C ±50ppm (±30ppm) -55°C ~ +125°C See table below 7pF max 10 ~ 32pF & SR 50 ~ 100μ W 500MΩ Min 240°C+/-0.5°C 10 Sec Max ±5ppm Please specify @25°C Please specify @25°C Please specify @25°C ±3°C ESR ( Ω ) Max Frequency (MHz) 3.50 ~ <4.00 4.00 ~ <6.00 6.00 ~ <10.00 10.00 ~ <14.00 14.00 ~ 30.00 200 150 100 80 50 5.5 ± 0.5 Dimensions in mm (Reflow 245°C max) 11.6 ± 0.2 Pad Surface Material Au 11.0 4.8 2.0 ± 0.2 5.08 2.0 2.5 2.4 2.5 5.08 3.8 Sugges ted Footprint Please note that all parameters can not necessarily be specified in the same devic Customer to specify : Frequency, Frequency Tolerance, Temperature Stability, Operating temperature range, Load Capacitance In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered ISSUE 5M4 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK DATE: 16/0305 http://www.actcrystals.com 1 of 2 Tel : Fax : email : A B C D E F G H 24 11.5 1.75 1.5 ±0.3 ±0.1 ±0.1 +0.1 0 2 4 J 0044 (0)118 979 1238 0044 (0)118 979 1283 [email protected] K L M N O 2.2 12 0.4 12 3O 2.4 5.9 3O ±0.1 ±0.1 ±0.1 ±0.1 ±0.05 ±0.1 ±0.1 ±0.1 A B C D E G H J 330 100 25. 2.0 O1 2.0 O2 R1.0 In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice. ISO9001: 2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 of 2 ISSUE 5M4 Date: 16/3/05