ACT ACT9213

Tel :
Fax :
email :
0044 (0) 118 979 1238
0044 (0) 118 979 1283
[email protected]
ACT9213 LVPECL OSCILLATOR
The ACT9213 LVPECL Oscillator is a miniature low profile device allowing for frequencies up to 350.0MHz to be
available in a 7X5 mm SMD package. The metal lid is grounded through the ceramic package and the pads are
gold plated. This device is particularly suited to Communications / Networking applications and also to many
other applications where a low voltage LVPECL output is required. Only 7x5mm this device is particularly popular
where board space dictates small size and / or automatic assembly is a requirement. The devices are available
loose or taped and reeled to suit both low and higher volume requirements.
Specification
Parameter
Symbol
Specification
Condition
Frequency Range
Frequency Stability
Temp Operating Range
Temp Storage Range
Supply Voltage
Supply Current (max)
Duty Cycle
Output Level ‘0’
Output Level ‘1’
Rise & Fall Time (max)
Output Load
fo
Δf/fo
Top
Tstg
Vdd
Iop
Tw/t
VOL
VOH
Tr/Tf
N/CL
40 ~ 350MHz
±20 ~ ±100ppm max *
-40 ~ +85°C standard
-55 ~ +125°C
3.3V (3.17V Min, 3.47V max)
99mA
50% ± 10%
fo<160MHz Vdd-1.62Vmax fo>160MHz Vdd-1.7V max
fo>160MHz Vdd-1.025Vmin fo>160MHz Vdd-1.4V min
0.5ns typical 1.0ns max
RL 50Ω to Vdd - 2V
Start-up Time
Tosc
5ms max
Aging
Output Enable Function
Enable Voltage high
Enable Voltage low
Standby Current
Phase Jitter
Fa
±3.0 ppm/yr max
Pin 1
2.4V min Vdd max
Ground min 0.8V max
10μA max
1.0ps
*
Venh
Venl
Isb
Tj
Please specify
Please specify
Others available please enquire
20-80% output Voltage
Within ±0.5ppm of fo & power to 90%
final amplitude
OE low
12kHz to 20MHz
Inclusive of 25°C Tolerance, Operating temperature stability, Vdd, Output load, first year aging, shock and vibration
Standard frequencies MHz :
77.76
156.25
106.52
187.50
125.00
212.50
155.52
Lead free - RoHS comp.
Pad surface plating Au 0.71.2um
Pin Functions:
1: OE
2: No Connection
3: Ground
4: Output
5: Complementary output
6:Vdd
Please note that all parameters can not necessarily be specified in the same device
Customer to specify :Frequency, Frequency Stability, Operating Temperature Range
In line with our ongoing policy of product evolvement and improvement, the above specification may subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Page 1 of 3
Issue : 1 T6
Date :16/08/05
Tel :
Fax :
email :
0044 (0) 118 979 1238
0044 (0) 118 979 1283
[email protected]
ACT9213 TAPE AND REEL DIMENSIONS (mm)
Maximum Re-flow Conditions
In line with our ongoing policy of product evolvement and improvement, the above specification may subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Page 2 of 3
Issue : 1 T6
Date :16/08/05
Tel :
Fax :
email :
0044 (0) 118 979 1238
0044 (0) 118 979 1283
[email protected]
ACT9213 Test Circuit and Waveform
In line with our ongoing policy of product evolvement and improvement, the above specification may subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Page 3 of 3
Issue : 1 T6
Date :16/08/05