SENSITRON SEMICONDUCTOR SHD444104 TECHNICAL DATA DATA SHEET 726, REV – Formerly part number SHD4464 SMALL SIGNAL TRANSISTOR DESCRIPTION: AN NPN SMALL SIGNAL TRANSISTOR IN A SURFACE CERAMIC LCC-4 PACKAGE. MAXIMUM RATINGS RATING (ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED). CONDITIONS - MIN. - TYP. - MAX. 150 UNITS Vdc Collector-Emitter Voltage (VCEO) Collector-Base Voltage (VCBO) - - - 150 Vdc Emitter-Base Voltage (VEBO) - - - 6.0 Vdc (IC) - - - 300 mAdc - - - 0.45 W Collector Current-Continuous Total Power Dissipation (PD @ TC = 25°C) mW/°C Derate above 25°C Thermal Resist. Junction to Case Operating Junction and Storage Temp. RθJC - -65 - 285 +150 (TJ & Tstg) ELECTRICAL CHARACTERISTICS OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage V(BR)CEO (1) °C/W °C (ALL ELECTRICAL CHARACTERISTICS TA = 25°C) IC = 10mAdc, IB = 0 150 - - Vdc 150 - - Vdc 6.0 - - Vdc Collector-Base Breakdown Voltage V(BR)CBO IC = 10µAdc, IE = 0 Emitter-Base Breakdown Voltage V(BR)EBO IE = 10µAdc, IC = 0 (ICBO) VCB = 75Vdc, IE = 0 - - 0.05 µAdc VCB = 75Vdc, IE = 0, TA = 150°C - - 50 µAdc (IEBO) VEB = 4.0Vdc, IC = 0 - - 25 nAdc (hFE) IC = 0.1 mAdc 35 - (VCE = 10Vdc) IC = 1.0 mAdc 50 IC = 10 mAdc (1) 75 IC = 150 mAdc (1) 100 IC = 300 mAdc (1) 20 VCE = 20Vdc, IC = 20mAdc, 150 - - MHz - - 8.0 pF Collector Cutoff Current Emitter Cutoff Current ON CHARACTERISTICS DC Current Gain - 300 SMALL-SIGNAL CHARACTERISTICS Current Gain, Bandwidth (2) (fT) f = 100MHz Output Capacitance (Cobo) VCB = 10Vdc, IE =0, f = 1.0 MHz •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • SENSITRON DATASHEET 726, REVISION - SHD444104 RATING CONDITIONS SMALL-SIGNAL CHARACTERISTICS (Contiued) Input Capacitance (Cibo) MIN. TYP. MAX. UNITS - - 80 pF VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz Delay Time (td) (IC = 150 mAdc, IB1 = 15 mAdc, VCC =100Vdc, VBE(off) =-2.0Vdc) - 20 - ns Rise Time (tr) (IC = 150 mAdc, IB1 = 15 mAdc, VCC =100Vdc, VBE(off) =-2.0Vdc) - 35 - ns Storage Time (ts) (IC = 150 mAdc, IB1 = IB2 = 15 mAdc, VCC =100Vdc) - 800 - ns Fall Time (tf) (IC = 150 mAdc, IB1 = IB2 = 15 mAdc, VCC =100Vdc) - 80 - ns (1) Pulsed. Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%. (2) fT = IhfeI • ftest MECHANICAL DIMENSIONS - in inches / mm .225 (5.71 .215 5.46) .075 (1.90 .061 1.55) .155 (3.93 .145 3.68) PIN 1 - COLLECTOR 1 PIN 2 - EMITTER PIN 3 - BASE PIN 4 – NO CONNECTION .155 (3.93) Max Pin 1 Identifier .044 (1.12 .029 .74) .225 (5.71) Max .028 (.71 .022 .56) .048 (1.22 .032 .81) .088 (2.23 .072 1.83) 1 2 4 3 LCC-4 .007 (.18 .003 .08) See Detail A .055 (1.39 .045 1.14) .022 (.56 .006 .15) Detail A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •