SENSITRON SEMICONDUCTOR SHD231009 TECHNICAL DATA DATA SHEET 4305, REV - HERMETIC P-CHANNEL JFET FEATURES: • 30 V, 75 Ω, 30 mA P-Channel JFET • Hermetically Sealed • Surface Mount Package: Ceramic LCC-3 MAXIMUM RATINGS ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE ID = 1µA, VDS = 0V SATURATED DRAIN CURRENT VGS = 0V, VDS = -18V GATE TO DRAIN BREAKDOWN VOLTAGE OPERATING AND STORAGE TEMPERATURE TERMAL RESISTANCE JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25°C SYMBOL VGS IDSS BVGD TOP/TSTG RθJC PD MIN. -30 -55 - TYP. - MAX. 30 -90 30 +175 300 0.5 UNITS V mA V °C °C/W W RDS(ON) VGS(OFF) - 5 75 10 gfs - 4.5 - S(1/Ω) ID(OFF) - - 10 - 500 pA - -1 500 1 - µA pA µA - - 0.02 5 0.01 6 10 6 15 - 0.7 -1 V Ciss - 20 25 pF Crss - 5 7 pF ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE ON STATE RESISTANCE VGS = 0V, ID = -1 mA GATE SOURCE CUT OFF VOLTAGE VDS = -15V, ID = -1 nA COMMON SOURCE TRANSCONDUCTANCE VDS = -15V, ID = -1 mA DRAIN CUT OFF CURRENT, VDS = -15V, VGS = 12V TA = 25°C TA = 125°C GATE REVERSE CURRENT VGS = 20V TA = 125°C TURN ON DELAY TIME VDD = - 10V, RISE TIME ID = - 15 mA, TURN OFF DELAY TIME RG = 100Ω, FALL TIME VGS = 20V GATE SOURCE FORWARD VOLTAGE IG = - 1 mA VDS = 0V INPUT CAPACITANCE VGS = 0V, VDS = -15V, f = 1MHz REVERSE TRANSFER CAPACITANCE VGS = 12V, VDS = 0V, f = 1MHz IGSS td(ON) tr td(OFF) tf VGS(F) Ω V ns • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] • SHD231009 SENSITRON TECHNICAL DATA DATASHEET 4305, REV. MECHANICAL DIMENSIONS - in inches / mm .008(.20) R Typ 3 Places .012(.30) R .054 (1.370 .045 1.160) 3 .105 (2.68 .095 2.41) 2 1 .036 (.91 .024 .61) .0125 Typ (.318 ) .024 (.61 .016 .41) .093 (2.37 .087 2.21) .079 (2.01 .071 1.81) .125 (3.18 .115 2.92) LCC-3 PINOUT TABLE DEVICE TYPE P Channel JFET PIN 1 PIN 2 PIN 3 Gate Source Drain DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-mail Address - [email protected] •