BAS16 SURFACE MOUNT SWITCHING DIODES VOLTAGE 100 Volts POWER 350mWatts SOT- 23 Unit: inch (mm) .119(3.00) .110(2.80) .056(1.40) • Surface mount package Ideally Suited for Automatic insertion .103(2.60) • Electrically Identical to Standard JEDEC .047(1.20) • Fast switching speed. • High Conductance .086(2.20) .007(.20)MIN FEATURES • Pb free product are available : Pb free 99% Sn above can meet Rohs .083(2.10) .066(1.70) environment substance directive request .006(.15) .002(.05) .006(.15)MAX .020(.50) .013(.35) Terminals: Solderable per MIL-STD-202G, Method 208 .044(1.10) Case: SOT-23, Plastic .035(0.90) MECHANICAL DATA Approx. Weight: 0.008 gram Marking Code: A6 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. PARAMETER SYMBOL B A S 16 UNITS Reverse Voltage VR 75 V Peak Reverse Voltage VRM 100 V Rectified Current (Average), Half Wave Rectification with Resistive Load and f >=50 Hz IO 250 mA Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 2 A Power Dissipation Derate Above 25O C PTOT 350 mW Maximum Forward Voltage @ IF=0.01A VF 0.855 V Maximum DC Reverse Current at Rated DC Blocking Voltage TJ= 25O C IR 1 uA Typical Junction Capacitance( Notes1) CJ 2 pF Maximum Reverse Recovery (Notes2) TRR 6 ns RθJA 357 TJ -55 TO +125 Maximum Thermal Resistance Storage Temperature Range O C/W O C SINGLE NOTE: 1. CJ at VR=0, f=1MHZ 2.From IF=10mA to IR=1mA, VR=6Volts, RL=100Ω REV.0-MAR.7.2005 PAGE . 1 BAS16 10 100 O REVERSE CURRENT, mA FORWARD CURRENT, mA TA=150 C 10 1.0 O TA=125 C 1.0 O TA=85 C 0.1 O TA=55 C 0.01 TA=25OC 0.001 0.1 0.2 0.6 0.4 0.8 1.0 1.2 0 10 20 30 40 50 REVERSE VOLTAGE, Volts FORWARD VOLTAGE, Volts LEAKAGE CURRENT FORWARD VOLTAGE DIODE CAPACITANCE, pF 6.0 4.5 60 W 3.5 VRF=2V 2nF 5k W Vo 1.5 0 0 2 4 6 8 RECTIFICATION EFFCIENCY MEASUREMENT CIRCUIT REVERSE VOLTAGE, Volts TYPICAL CAPATICANCE REV.0-MAR.7.2005 PAGE . 2 BAS16 MOUNTING PAD LAYOUT Unit: inch (mm) 0.078(2.0) 0.035(0.9) SOT-23 0.031(0.8) 0.037(0.95) ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3.0K per 7" plastic Reel LEGAL STATEMENT IMPORTANT NOTICE This information is intended to unambiguously characterize the product in order to facilitate the customer's evaluation of the device in the application. The information will help the customer's technical experts determine that the device is compatible and interchangeable with similar devices made by other vendors. The information in this data sheet is believed to be reliable and accurate. The specifications and information herein are subject to change without notice. New products and improvements in products and product characterization are constantly in process. Therefore, the factory should be consulted for the most recent information and for any special characteristics not described or specified. Copyright Pan Jit International Inc. 2003 All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract. The information presented is believed to be accurate and reliable, and may change without notice in advance. No liability will be accepted by the publisher for any consequence of use.Publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. STAD-NOV.10.2004 PAGE . 3