05084 PSMDA05C-8 thru PSMDA24C-8 STANDARD CAPACITANCE TVS ARRAY APPLICATIONS ✔ Multiple I/O Port Protection ✔ Board Level Interface Connection ✔ RS-232, RS-422 & RS-423 ✔ Portable Electronics IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) SO-14 FEATURES ✔ 450 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Bidirectional Configurations ✔ Monolithic Design ✔ Design for I/O Protection ✔ Available in Voltage Types Ranging From: 5V to 24V ✔ Protects Up to Eight(8) Lines ✔ ESD Protection > 40 kilovolts ✔ RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SO-14 Package Weight 0.15 grams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 16mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Part Number, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05084.R4 3/07 14 13 12 11 10 9 8 1 2 3 4 5 6 7 1 www.protekdevices.com PSMDA05C-8 thru PSMDA24C-8 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature SYMBOL VALUE UNITS PPP 450 Watts TL -55 to 150 °C TSTG -55 to 150 °C ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER PSMDA05C-8 PSMDA12C-8 PSMDA15C-8 PSMDA24C-8 05084.R4 3/07 DEVICE MARKING CODE SEB SED SEF SEH @ 25°C Unless Otherwise Specified RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) @ VWM VOLTS @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS 5.0 12.0 15.0 24.0 6.0 13.4 16.7 26.7 9.8 19.0 24.0 40.0 2 MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE PER LINE @8/20µs VC @ IPP @VWM ID µA @0V, 1 MHz C pF 15.4V @30A 26.4V @ 17A 32.4V @ 14A 45.0V @ 10A 100 1 1 1 350 150 120 100 www.protekdevices.com PSMDA05C-8 thru PSMDA24C-8 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 1,000 450W 8/20µs Waveform 100 10 0.1 1 10 100 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1,000 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0 5 10 15 t - Time - µs 20 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs % Of Rated Power 80 60 40 20 Average Power 0 0 05084.R4 3/07 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com PSMDA05C-8 thru PSMDA24C-8 SO-14 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-14 -A- 14 8 -B- 1 P M B M 0.010” (0.25 MM) 7 PL 7 PACKAGE DIMENSIONS MILLIMETERS MIN MAX DIM DG C R X 45º 0º 10º -TK 0.010” (0.25 MM) M T B S F J 8.55 3.80 1.35 0.35 0.40 1.27 BSC 0.19 0.10 5.80 0.25 A B C D F G J K P R A S 8 PL INCHES MIN MAX 0.386 0.393 10.00 0.150 0.157 4.00 0.054 0.068 1.75 0.014 0.019 0.49 0.016 0.049 1.25 1.27 BSC 0.05 BSC 0.05 BSC 0.008 0.009 0.25 0.004 0.009 0.25 0.229 0.244 6.20 0.019 0.50 0.010 NOTES MOUNTING PAD 1. 2. 3. 4. 5. 6. 0.050” TYP 0.030” ± 0.005” - T - = Seating Plane and Datum Surface. Dimensions “A” and “B” are Datum. Dimensions “A” and “B” do not include mold protrusions. Maximum mold protrusion is 0.015” (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.160” ± 0.005” 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 16mm tape, i.e., PSMDA05C-8-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 16mm tape, i.e., PSMDA05C-8-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., PSMDA05C-8-LF-T13. 5. No Suffix = Product Shipped in Tubes of 55 pcs per Tube. 0.245” MIN 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06006 COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05084.R4 3/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com