05070 SMDA05CM thru SMDA24CM Only One Name Means ProTek’Tion™ STANDARD CAPACITANCE TVS ARRAY APPLICATIONS ✔ ✔ ✔ ✔ ✔ ✔ RS-232, RS-422 & RS-423 Data Lines Microprocessor Based Equipment Control & Monitoring Equipment Modems Portable Electronics Medical Electronics IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) SO-8 FEATURES ✔ 500 Watts Peak Pulse Power per Line (tp=8/20µs) ✔ Bidirectional Configurations ✔ Monolithic Design ✔ Available in Voltage Types Ranging From: 5V to 24V ✔ Protects 4 - 7 Lines ✔ ESD Protection > 40 kilovolts ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SO-8 Package Weight 70 milligrams (Approximate) Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Logo, Marking Code, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05070.R4 3/05 8 7 6 5 1 2 3 4 1 www.protekdevices.com SMDA05CM thru SMDA24CM DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER SMDA05CM SMDA08CM SMDA12CM SMDA15CM SMDA24CM 05070.R4 3/05 DEVICE MARKING CODE REB REC RED REF REH RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM CLAMPING VOLTAGE (See Fig. 2) MAXIMUM CLAMPING VOLTAGE (See Fig. 2) V WM VOLTS @ 1mA V(BR) VOLTS @ IP = 1A VC VOLTS 5.0 8.0 12.0 15.0 24.0 6.0 8.5 13.4 16.7 26.7 9.8 13.4 19.0 24.0 43.0 2 MAXIMUM LEAKAGE CURRENT MAXIMUM CAPACITANCE PER LINE @8/20µs VC @ IPP @VWM ID µA @0V, 1 MHz C pF 19.0V @ 30A 23.7V @ 24A 29.2V @ 20A 31.1V @ 18A 45.0V @ 13A 100 10 1 1 1 350 300 150 100 63 www.protekdevices.com SMDA05CM thru SMDA24CM GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Power - Watts 10,000 500W 8/20µs Waveform 1,000 100 10 0.1 1 10 100 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1,000 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0 5 10 15 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs 80 % Of Rated Power 20 60 40 20 Average Power 0 0 05070.R4 3/05 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com SMDA05CM thru SMDA24CM PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-8 -A- 8 5 -B- 0.010” (0.25 MM) P M B M 4 PL 1 PACKAGE DIMENSIONS 4 DIM D G C R X 45º 0º - 10º -TJ K 0.010” (0.25 MM) M T B S F A S 8 PL 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX 5.00 0.189 0.196 4.00 0.150 0.157 1.75 0.054 0.068 0.49 0.014 0.019 1.250 0.016 0.049 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.25 0.004 0.008 6.20 0.229 0.244 0.50 0.010 0.019 NOTES MOUNTING PAD 0.050” ± 0.005” A B C D F G J K P R MILLIMETERS MIN MAX 1. - T - = Seating Plane and Datum Surface. 2. Dimensions “A” and “B” are Datum. 3. Dimensions “A” and “B” do not include mold protrusion. 4. Maximum mold protrusion is 0.015” (0.380 mm) per side. 5. Dimensioning and tolerances per ANSI Y14.5M, 1982. 6. Dimensions are exclusive of mold flash and metal burrs. 0.030” ± 0.005” TAPE & REEL/BULK ORDERING NOMENCLATURE 0.160” ± 0.005” 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., SMDA05CM-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., SMDA05CM-T13. 4. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., SMDA05CM-LF-T7. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. 0.245” MIN 0.045” ± 0.005” Outline & Dimensions: Rev 1 - 11/01, 06009 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05070.R4 3/05 4 www.protekdevices.com