PC457 Ultra Slim Inline Relay FEATURES Handles from signal level to 5 amps 1 Form A contact form Ultra Slim, 5 MM package SIL terminal pattern Terminals on 1/10 in grid pattern 2 Kv dielectric between coil and contacts Sealed, immersion cleanable File # E86876 UL/CSA RATINGS CONTACT DATA All Forms All Contacts Load Type General Use 3A or 5A at 30VDC / 250VAC Resistive 3A or 5A at 30VDC / 250VAC Minimum Load 0.1 mA @ 0.1 VDC Material AgCdO (Silver Cadmium Oxide) AgCdO+Au (Silver Cad Oxide Gold Clad) Initial Contact Resistance 100 milliohms max @ 0.1A, 6VDC Service Life 7 Mechanical 2 X 10 Operations Electrical 1 X 10 5 Operations CHARACTERISTICS Operate Time 6 ms. Max. Release Time 3 ms. Max. Insulation Resistance 1000 megohms min, at 500VDC, 50%RH Dielectric Strength 2000 Vrms, 1 min. between coil and contacts 1000 Vrms, 1 min. between open contacts Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 2.5 mm, 10 - 55 Hz Power Consumption .12W Ambient Temperature Range -40 to 70 C operating for class B, -40 to 130 C storage Weight 3 grams approx. ORDERING INFORMATION Example: PC457 -1A -12 S -5 Model Contact Form 1A Coil Voltage Enclosure S: Sealed; C: Flux Free Contact Rating 3: 3 AMP; 5: 5 AMP 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PC457 Rev C 4-5-04 PAGE 1 PC457 PC457 COIL DATA Resistance Coil Voltage _ 10% ohms + Must Operate Voltage Max. Must Release Voltage Min. Continuous Voltage Max. (VDC) (VDC) (VDC) 3 75 2.2 0.15 3.3 5 208 3.5 0.25 5.5 6 300 4.2 0.30 6.6 9 675 6.3 0.45 9.9 12 1200 8.4 0.60 13.2 18 2700 12.6 0.90 19.8 1.20 26.4 24 3200 16.8 Note: Custom coil voltages within the ranges shown are available on special order. Dimensions in Inches (millimeters) Drawings are 2X actual size Side View End View .787 (20.0) .197 (5.0) .504 (12.5) .138 (3.5) .100 (2.54) .046 (1.1) .400 (10.16) .200 (5.08) .100 (2.54) Grid Pattern .047 Dia. 4 Places (1.2) Hole Pattern Wiring Diagram Notes: Tolerances + .010 unless otherwise noted Relays previously tested or used above 10mA at 6VDC or higher are not recommended for subsequent use in low level applications 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2