PC730 30 Amp Power Relay FEATURES 1/4 inch male QC terminals Up to 30 amp switching capacity Up to 1 1/2 horsepower rating Smallest 30 amp 2 pole relay Convienient flanged case or PC mounting 2A or 2C contact configuration RoHS compliant E93379 CONTACT DATA UL/CUR RATINGS Load Type All Contacts Voltage General Purpose Resistive Motor 250 VAC 277 VAC 28 VDC 250 VAC 277 VAC 120 VAC 30 A 20 A 20 A 30 A 20 A 30 A 240 VAC 120 VAC 1 1/2 HP 1 HP Material AgCdO (Silver Cadmium Oxide) Initial Contact Resistance 50 milliohms max @ 1A, 6VDC Service Life Mechanical 1 X 107 Operations Electrical 1 X 10 5 Operations CHARACTERISTICS Operate Time 15 ms. Max. Release Time 10 ms. Max. Insulation Resistance 500 megohms min, at 500VDC, 50%RH 2500 Vrms, 1 min. between coil and contacts 1500 Vrms, 1 min. between open contacts 2500 Vrms, 1 min. between contact poles Dielectric Strength Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 2 mm, 10-50 Hz Power Consumption DC coil 1.8 W, AC coil 4 VA Ambient Temperature Range -40 to 70 C, -40 to 130 C storage Weight 70 grams approx. ORDERING INFORMATION Example: PC730 -2C -C3 -120 A Model Contact Form 2A, or 2C Mounting Style C1 : Side Flange, C3: Top Flange, P: PC Terminals Coil Voltage XXD: 6 thru 48 VDC or XXX A: 6 thru 277 VAC 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888)997-3933 Fax: (818) 342-5296 email: [email protected] URL: pickercomponents.com PC730 Rev A 4-13-09 PAGE 1 PC730 PC730 COIL DATA Voltage Coil Voltage Type DC AC Resistance Coil Must Operate Must Release ohms + 10% Power Voltage Max. Voltage Min. 6 20 4.5 0.6 9 45 6.75 0.9 12 80 18 180 24 320 48 6 9 1.2 13.5 1.8 18 2.4 1280 36 4.8 3.15 5.1 1.8 12 12.6 10.2 3.6 24 50.4 20.4 7.2 48 201 40.8 14.4 120 1260 102 36 220 4235 187 66 240 5040 204 72 236 83 1.8 W 4 VA 277 6712 Note: Custom coil voltages within the ranges shown are available on special order. Dimensions in Inches (Millimeters) Top Flange Case .320 (8.1) 1.57 (40.0) 1.57 (40.0) 2.02 (51.5) 1.40 (35.5) Wiring Diagram 1 2 3 4 5 6 7 8 Tolerances + .010 unless otherwise noted 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: (888)997-3933 Fax: (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2 PC730 PC730 C1 Side Flange Case Printed Circuit Board Mounting 2.75 (69.85) 1.57 (40.0) 2.0 (50.8) .177 (4.5) 1.58 (40.1) 1.32 (33.5) .047 (1.2) .157 (4.0) .570 (14.5) .315 (8.0) .250 (6.35) 1.32 (33.5) 1.40 (35.6) .200 TYP. (5.1) .250 (6.3) .590 (15.0) .268 (6.8) .563 (14.3) 1.5 (38.1) .072 TYP. (1.83) .874 (22.2) .952 (24.2) .052 TYP. (1.32) Rectangular .052 by .072 holes are recommended. .076 (1.93) Diameter round holes on the above center to center spacing may be used. Tolerances + .010 unless otherwise noted 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL Picker Components PAGE 3