Mobile RF: LPC MID T he MID switchable connector is lightweight, small in size, and surface mounted with a low profile of 3,47 mm. This new generation of mobile phone connectors uses the latest plated plastics technology, which permits the outer shape to be modified easily, allowing for a more flexible design. Applications: • Mobile Phones • PDA • Portable Radio • Portable Satellite For more information: www.ittcannon.com/cat267 Product Features • Compact design and lightweight. • Plastic plated shell. • 100% inspected on assembly. Performance Specifications Solder System Vibration Voltage Standing Wave Ratio (VSWR) After 500 mating cycles Insertion loss on customer PCB (mismatch losses Included) through PCB connector (unmated) Isolation between switching contacts 12,000 mating cycles min. In accordance with IEC 68-2-60: SO2H2S No Damage 0 to 2 GHz Operable in 90% relative humidity, temp. 40°C (104°F) 50 Ω nominal 4 N and < 7 N > 0.20 N after 2 soldering processes and 10,000 mating cycles Surface Mount 0.9 mm –40°C and 85°C (–40°F to 185°F) Tape & Reel, 2000 pieces per reel In accordance with IEC 68-2-11, Method Ka In accordance with IEC 68-2-27: 30 g (force) = 294.2 m/s2 6 ms 1/2 sine 6 directions - No discontinuity Infrared and hot air reflow In accordance with IEC 68-2-36: 1.92 10–2g/Hz 5 to 200 Hz in 3 axis – No discontinuity Mobile Connector Durability Corrosive Atmosphere Frequency Range Humidity Impedance Mating Force of Ground Mating Force of Signal Mounting Offset Mating Operating Temperature Packaging Salt Spray Shock At 900 MHz <1.2:1 <1.3:1 At 1800 MHz <1.3:2 <1.4:1 At 2000 MHz <1.3:1 <1.4:1 <0.1 dB >30 dB <0.1 dB >25 dB <0.1 dB >25 dB Materials and Finishes Description Shell Insulator Moving Contact Fixed Contact Material LCP LCP Beryllium Copper Brass Finish Gold Color: Natural Gold Gold Please contact your local Cannon representative: www.ittcannon.com/support/ContactUs Dimensions are shown in mm (inch) Dimensions subject to change Version 05.01.03 M-13 www.ittcannon.com