MOBILE CONNECTOR SERIES LPC CP1/CP2 LPC CP1/CP2 This high function mobile phone connector uses a seal with a cold pin that acts as a membrane to prevent dust and water penetration as well as minimizing RF emissions in unmated conditions. LPC CP1/CP2 is surface mountable with a low profile. It is manufactured both in Europe and Asia Pacific, 100% inspected and packed in tape and reel packaging. Materials and Finishes 1.00±0.10 5.60±0.10 0.05±0.05 COPLANARITY 0.51 REF 0.70±0.10 Ø4.20±0.10 SECTION A-A 1.40±0.10 4.20±0.10 0.40±0.10 2.00±0.10 .10 0±0 10 Ø3.60±0. 2.50±0.05 0.67±0.10 4.03±0.10 Ø4.6 MEASURE OVER AØ3MM BALL FULLY SEATED IN THE CONE 5.00±0.10 120220-0132 7.65±0.05 3.00±0.10 Description Switchable PCB Connector LPC CP1 - Ribbed Switchable PCB Connector LPC CP2 - Ribless 0.90±0.10 Part Number 120220-0130 Brass, Gold Plated Black LPC Beryllium Copper, Gold plated Brass, Gold plated Brass, Gold Plated Silicone Rubber 3.43 REF (0.135) Shell Insulator Moving Contact Fixed Contact Cold Pin Gasket 3.00±0.10 LPC SP1 This waterproof connector is identical to the LPC CP1/CP2, but it features a special seal which allows it to be IP67 compliant (1 metre of water). Part Number 120220-0143 Description Switchable PCB Connector Dimensions are shown in mm. Dimensions subject to change www.ittcannon.com 9