Bulletin PD-20883 11/04
MUR3020WTPbF
Ultrafast Rectifier
Features
•
•
•
•
•
t rr = 35ns
IF(AV) = 30Amp
VR = 200V
Ultrafast Recovery Time
Low Forward Voltage Drop
Low Leakage Current
175°C Operating Junction Temperature
Lead-Free ("PbF" suffix)
Description/ Applications
International Rectifier's MUR.. series are the state of the art Ultra fast recovery rectifiers specifically designed with
optimized performance of forward voltage drop and ultra fast recovery time.
The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness
and reliability characteristics.
These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as
free-wheeling diode in low voltage inverters and chopper motor drives.
Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over
dissipation in the switching element and snubbers.
Absolute Maximum Ratings
Parameters
Max
VRRM
Peak Repetitive Peak Reverse Voltage
IF(AV)
Average Rectified Forward Current
Per Leg
Units
200
V
15
A
Total Device, (Rated VR ), TC = 150°C
Total Device
30
IFSM
Non Repetitive Peak Surge Current
Per Leg
200
IFM
Peak Repetitive Forward Current
Per Leg
30
(Rated VR , Square wave, 20 KHz), TC = 150°C
TJ, TSTG
Operating Junction and Storage Temperatures
- 65 to 175
°C
Case Styles
MUR3020WTPbF
Base
Common
Cathode
2
1
Anode
1
TO247
www.irf.com
3
2
Anode
2
Common
Cathode
1
MUR3020WTPbF
Bulletin PD-20883 11/04
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameters
Min Typ Max Units Test Conditions
VBR, Vr
Breakdown Voltage,
Blocking Voltage
200
-
-
V
IR = 100µA
VF
Forward Voltage
-
-
1.05
V
IF = 15A
-
-
0.85
V
IF = 15A, TJ = 150°C
-
-
10
µA
VR = VR Rated
IR
Reverse Leakage Current
-
-
500
µA
TJ = 150°C, VR = VR Rated
CT
Junction Capacitance
-
55
-
pF
VR = 200V
LS
Series Inductance
-
12
-
nH
Measured lead to lead 5mm
.
from package body
Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified)
Parameters
Min Typ Max Units Test Conditions
Reverse Recovery Time
trr
IRRM
Qrr
Peak Recovery Current
Reverse Recovery Charge
-
-
35
-
22
-
TJ = 25°C
IF = 15A
-
39
-
TJ = 125°C
VR = 160V
-
1.6
-
-
4.1
-
-
19
-
nC
-
90
-
ns
A
IF = 1.0A, diF/dt = 50A/µs, VR = 30V
diF /dt = 200A/µs
TJ = 25°C
TJ = 125°C
TJ = 25°C
TJ = 125°C
Thermal - Mechanical Characteristics
Parameters
Min
Typ
Max
Units
TJ
Max. Junction Temperature Range
-
-
- 65 to 175
TStg
Max. Storage Temperature Range
-
-
- 65 to 175
RthJC
Thermal Resistance, Junction to Case Per Leg
-
-
1.5
RthJA
Thermal Resistance, Junction to Ambient
-
-
40
RthCS
Thermal Resistance, Case to Heatsink
-
0.5
-
Wt
Weight
-
6.0
-
g
-
0.21
-
(oz)
6.0
-
12
Kg-cm
-
10
lbf.in
Mounting Torque
Per Leg
5.0
Marking Device
°C
°C/ W
MUR3020WT
Typical Socket Mount
Mounting Surface, Flat, Smooth and Greased
2
www.irf.com
MUR3020WTPbF
Bulletin PD-20883 11/04
100
1000
Reverse Current - I R (µA)
100
10
TJ = 175˚C
150˚C
125˚C
10
100˚C
1
0.1
25˚C
0.01
0
T = 150˚C
J
50
100
150
200
250
Reverse Voltage - VR (V)
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage
T = 25˚C
J
1000
Junction Capacitance - C T (pF)
Instantaneous Forward Current - I F (A)
T = 175˚C
J
1
T = 25˚C
J
100
10
0.1
0
0.3
0.6
0.9
1.2
Forward Voltage Drop - VFM (V)
1
1.5
10
100
1000
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
Fig. 1 - Typical Forward Voltage Drop Characteristics
Thermal Impedance Z
thJC
(°C/W)
10
1
0.1
D = 0.50
D = 0.20
D = 0.10
D = 0.05
D = 0.02
D = 0.01
PDM
t1
t2
Notes:
Single Pulse
(Thermal Resistance)
0.01
0.00001
0.0001
0.001
1. Duty factor D = t1/ t2
2. Peak Tj = Pdm x ZthJC + Tc
0.01
0.1
1
t1, Rectangular Pulse Duration (Seconds)
Fig. 4 - Max. Thermal Impedance ZthJC Characteristics
www.irf.com
3
MUR3020WTPbF
Bulletin PD-20883 11/04
25
Average Power Loss ( Watts )
Allowable Case Temperature (°C)
180
170
DC
160
150
Square wave (D = 0.50)
Rated Vr applied
140
20
RMS Limit
15
D = 0.01
D = 0.02
D = 0.05
D = 0.1
D = 0.2
D = 0.5
DC
10
5
see note (3)
130
0
0
5
10
15
20
0
25
Fig. 5 - Max. Allowable Case Temperature
Vs. Average Forward Current
5
10
15
20
25
Average Forward Current - IF(AV) (A)
Average Forward Current - IF(AV) (A)
Fig. 6 - Forward Power Loss Characteristics
200
60
I F = 30 A
I F = 15 A
IF = 8 A
VR = 160V
TJ = 125˚C
TJ = 25˚C
160
50
I F = 30 A
I F = 15 A
IF = 8 A
120
trr ( ns )
Qrr ( nC )
40
30
80
40
20
VR = 160V
TJ = 125˚C
TJ = 25˚C
10
100
1000
di F /dt (A/µs )
Fig. 7 - Typical Reverse Recovery vs. di F /dt
0
100
1000
di F /dt (A/µs )
Fig. 8 - Typical Stored Charge vs. di F /dt
(3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR
4
www.irf.com
MUR3020WTPbF
Bulletin PD-20883 11/04
Reverse Recovery Circuit
VR = 200V
0.01 Ω
L = 70µH
D.U.T.
di F /dt
dif/dt
ADJUST
D
IRFP250
G
S
Fig. 9- Reverse Recovery Parameter Test Circuit
3
trr
IF
tb
ta
0
Q rr
2
I RRM
4
0.5 I RRM
di(rec)M/dt
5
0.75 I RRM
1
/dt
di fF/dt
1. diF/dt - Rate of change of current through zero
crossing
2. IRRM - Peak reverse recovery current
3. trr - Reverse recovery time measured from zero
crossing point of negative going IF to
point
where
a line passing through 0.75 IRRM
and 0.50 IRRM
extrapolated to zero
current
4. Qrr - Area under curve defined by t rr
and IRRM
t rr x I RRM
Q rr =
2
5. di (rec) M / dt - Peak rate of change of
current during t b portion of t rr
Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
MUR3020WTPbF
Bulletin PD-20883 11/04
Outline Table
15.90 (0.626)
15.30 (0.602)
3.65 (0.144)
3.55 (0.139)
DIA.
5.30 (0.209)
4.70 (0.185)
2.5 (0.098)
1.5 (0.059)
5.70 (0.225)
5.30 (0.208)
20.30 (0.800)
19.70 (0.775)
BASE
COMMON
CATHODE
5.50 (0.217)
1
2
2
4.50 (0.177)
(2 PLCS.)
3
1
ANODE
14.80 (0.583)
14.20 (0.559)
1.40 (0.056)
1.00 (0.039)
5.47 (0.216)
2
COMMON
CATHODE
3
ANODE
4.30 (0.170)
3.70 (0.145)
2.20 (0.087)
MAX.
3.20 (0.126)
MAX.
2.40 (0.095)
MAX.
0.80 (0.032)
0.40 (0.213)
5.43 (0.213)
Conform to JEDEC outline TO-247AC (TO-3P)
Dimensions in millimeters and (inches)
Marking Information
EXAMPLE: THIS IS A MUR3020WT
WITH ASSEMBLY
LOT CODE 5657
ASSEMBLED ON WW 35, 2000
IN ASSEMBLY LINE "H"
6
INTERNATIONAL
RECTIFIER
LOGO
PART NUMBER
MUR3020WT
P035H
56
ASSEMBLY
LOT CODE
57
DATE CODE
P = LEAD-FREE
YEAR 0 = 2000
WEEK 35
LINE H
www.irf.com
MUR3020WTPbF
Bulletin PD-20883 11/04
Ordering Information Table
Device Code
MUR
30
20
1
2
3
WT PbF
4
5
1
-
Ultrafast MUR Series (TO-247AC)
2
-
Current Rating (30 = 30A)
3
-
Voltage Rating (20 = 200V)
4
-
WT = Center Tap (Dual) TO-247
5
-
none = Standard Production
PbF = Lead-Free
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level and Lead-Free.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 11/04
www.irf.com
7