FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD Features Description th ■ Three 6 order video anti-aliasing or reconstruction filters The FMS6203 offers comprehensive filtering for set top box or DVD applications. It is intended to replace passive LC filters and drivers with a low-cost integrated device. ■ Supports Component YPrPb or RGB video ■ Three channels selectable to 8MHz,16MHz, 32MHz for SD/ PS/HD applications Filter channels are specialized for either component (YPbPr) or RGB video signals. These channels offer selectable frequency response of 8, 16, or 32MHz. The filters can also be bypassed for high-frequency operation. Additional functionality of these channels include input biasing mode and output disable. ■ Includes wide bandwidth bypass mode ■ 6dB gain option available for 150Ω, doubly terminated video load ■ 0dB gain option available for high-impedance loading ■ Selectable Clamp or Bias mode on Pb,Pr / B,R inputs The FMS6203 may be driven directly by a DC-coupled DAC output or an AC-coupled signal. All inputs accept standard 1Vpp video signals. ■ Inputs and outputs can be either AC or DC coupled ■ DC-coupled outputs eliminate expensive coupling capacitors ■ Output Disable Each channel includes an output amplifier capable of driving a single (150Ω), AC or DC-coupled video load. All outputs can be disabled to save power in DC coupled applications. ■ 5V Only ■ 2kV CDM / 8kV HBM ESD protection ■ Lead (Pb) Free packages - TSSOP-14 The device is available in two factory set options, a 0dB gain option and a 6dB gain option. Applications ■ Cable and Satellite set top boxes ■ DVD players ■ HDTV ■ Personal Video Recorders (PVR) ■ Video On Demand (VOD) Functional Block Diagram Y/G In Pb/B In Clamp Clamp / Bias SD PS HD BP SD PS HD BP SD PS HD BP Y/G Out Pb/B Out Bias Pr/R In Clamp / Bias FSEL0 FSEL1 OE ©2006 Fairchild Semiconductor Corporation FMS6203 Rev. 1A Pr/R Out Factory Option 0dB or 6dB Gain 1 www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD April 2006 Gain Setting Package Pb-Free Operating Temperature Range Packing Method FMS6203MTC1400 0dB TSSOP-14 Yes 0°C to 85°C Tube FMS6203MTC1400X 0dB TSSOP-14 Yes 0°C to 85°C Tape and Reel FMS6203MTC1406 6dB TSSOP-14 Yes 0°C to 85°C Tube FMS6203MTC1406X 6dB TSSOP-14 Yes 0°C to 85°C Tape and Reel Part Number Moisture sensitivity level for all parts is MSL-1. Pin Configuration VCC 1 14 VCC Fsel0 2 13 Fsel1 Y/G In 3 12 Y/G Out Pb/B In 4 11 Pb/B Out Pr/R Out FAIRCHILD FMS6203 14P TSSOP Pr/R In 5 10 BIAS 6 9 OE GND 7 8 GND Pin Assignments Pin# Pin Type Description 1 VCC Input +5V supply 2 FSEL0 Input Selects filter corner frequency 3 Y/G In Input Selectable video input 4 Pb/B In Input Selectable video input 5 Pr/R In Input Selectable video input 6 BIAS Input Input Bias on Pb/B Pr/R 0=Bias 1=Clamp 7 GND Input Must be tied to ground. Do not float. 8 GND Input Must be tied to ground. Do not float. 9 OE Input Output disable control 0=On 1=Off 10 Pr/R Out Output Filtered SD,PS,HD,BP video output 11 Pb/B Out Output Filtered SD,PS,HD,BP video output 12 Y/G Out Output Filtered SD,PS,HD,BP video output 13 FSEL1 Input Selects filter corner frequency 14 VCC Input +5V supply 2 FMS6203 Rev. 1A www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD Ordering Information The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table defines the conditions for actual device operation. Parameter Min. Max. Unit DC Supply Voltage -0.3 6 V Analog and Digital I/O -0.3 Vcc + 0.3 V 50 mA Output Current, Any One Channel (Do Not Exceed) Reliability Information Parameter Min. Typ. Junction Temperature Storage Temperature Range -65 Lead Temperature (Soldering, 10s) Max. 150 °C 150 °C 300 Thermal Resistance (ThetaJA) JEDEC Standard Multi-Layer Test Boards, Still Air Unit 97 °C °C/W Recommended Operating Conditions Parameter Min. Operating Temperature Range -40 Supply Voltage Range 4.75 3 FMS6203 Rev. 1A Typ. Max. Unit 85 °C 5.0 5.25 V www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD Absolute Maximum Ratings Tc = 25°C, Vcc = 5V, Rsource = 37.5Ω, inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz; all gain options; unless otherwise noted. Symbol Parameter Current1 Conditions Min. ICC Supply ICC1 Supply Current1 VIN Video Input Voltage Range Referenced to GND if DC-coupled VIL Digital Input Low1 FSel0,FSel1 0 FSel0,FSel1 2.4 1 VIH Digital Input High TENABLE Output Enable Time Typ. Max Units No load 36 75 mA No load , Output disabled 15 35 mA 1.0 150 Ohm DC load Vpp 0.8 Vcc 300 V V ns Standard Definition Electrical Characteristics Tc = 25°C, Vin = 1Vpp, Vcc = 5V, Rsource = 37.5Ω, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options; unless otherwise noted. Symbol AVSD Parameter Channel Gain Conditions Error1 1 Min. Typ. Max Units -0.4 0 0.4 dB 5.2 7.15 MHz 8 MHz 50 dB 0.3 % f1dBSD -1dB Bandwidth fcSD -3dB Bandwidth fSBSD Attenuation(stopband reject)1 f = 27MHz DG Differential Gain DP Differential Phase 1.0 ° THD Output Distortion VOUT = 1.4Vpp, 3.58MHz 0.6 % XTALKSD Crosstalk (ch-to-ch) 1 MHz -70 dB SNR Signal-to-Noise Ratio2 NTC-7 weighting, 100kHz to 4.2MHz 75 dB tpdSD Propagation Delay Delay from input to output, 4.5MHz 85 ns 40 Progressive Scan Electrical Characteristics Tc = 25°C, Vin = 1Vpp, Vcc = 5V, Rsource = 37.5Ω, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options; unless otherwise noted. Symbol AVPS Parameter Conditions Channel Gain Error1 f1dBSPS -1dB Bandwidth fcPS -3dB Bandwidth 1 reject)1 f = 54MHz Min. Typ. Max Units -0.4 0 0.4 dB 10 13.5 MHz 16 MHz fSBPS Attenuation(stopband 44 dB THD Output Distortion VOUT = 1.4Vpp, 7MHz 37 0.55 % XTALKPS Crosstalk (ch-to-ch) 1 MHz -75 dB SNR Signal-to-Noise Ratio2 Unweighted; 100kHz to 15MHz 66 dB tpdPS Propagation Delay Delay from input to output, 10MHz 47 ns Notes: 1. 100% tested at 25°C 2. SNR = 20 * log (714mV / rms noise) 4 FMS6203 Rev. 1A www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD DC Electrical Characteristics Tc = 25°C, Vin = 1Vpp, Vcc = 5V, Rsource = 37.5Ω, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options; unless otherwise noted. Symbol Parameter Conditions Min. Error1 AVHD Channel Gain f1dBHD -1dB Bandwidth1 fcHD -3dB Bandwidth fSBHD Attenuation(stopband reject)1 f = 74.25MHz THD Output Distortion XTALKHD Crosstalk (ch-to-ch) SNR Signal-to-Noise Ratio tpdHD Propagation Delay 2 Typ. Max -0.4 0 0.4 28 31 MHz 32 MHz 40 dB 30 Units dB VOUT = 0.7Vpp, 22MHz ; 0dB ; 10kΩ load 0.5 % VOUT = 1.4Vpp, 22MHz ; 6dB ; 150Ω load 0.5 % 1 MHz -75 dB 30 MHz -57 dB Unweighted, 100kHz to 30MHz 66 dB Delay from input to output, 20MHz 25 ns Bypass Mode Electrical Characteristics Tc = 25°C, Vin = 1Vpp, Vcc = 5V, Rsource = 37.5Ω, all inputs AC coupled with 0.1µF, all outputs AC coupled with 220µF into 150Ω loads, referenced to 400kHz, all gain options; unless otherwise noted. Symbol Parameter Conditions 1 Typ. Max Units -0.4 0 0.4 dB AVBP Channel Gain Error f1dBBP -1dB Bandwidth 90 MHz fcBP -3dB Bandwidth 115 MHz THD Output Distortion XTALKBP Crosstalk (ch-to-ch) SNR Signal-to-Noise Ratio DC Min. 2 VOUT = 0.7Vpp, 22MHz ; 0dB ; 10kΩ load 0.3 % VOUT = 1.4Vpp, 22MHz ; 6dB ; 150Ω load 0.25 % 1 MHz -74 dB 30 MHz -64 dB Unweighted, 100kHz to 30MHz 70 dB Notes: 1. 100% tested at 25°C 2. SNR = 20 * log (714mV / rms noise) Frequency Select Truth Table FSEL1 FSEL0 Filter Freq Video Format 0 0 8MHz SD,480i Bi-level, 4.7µs pulse width 0 1 16MHz PS,480p Bi-level, 2.35µs pulse width 1 0 32MHz HD,1080i,720p Tri-level, 589ns pulse width 1 1 Bypass - - 5 FMS6203 Rev. 1A Sync Format www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD High Definition Electrical Characteristics FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD Mechanical Dimensions 14-Lead (TSSOP) 6 FMS6203 Rev. 1A www.fairchildsemi.com The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ E2CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I18 7 FMS6203 Rev. 1A www.fairchildsemi.com FMS6203 Low-cost 3-Channel Video Filter Drivers for SD/PS/HD TRADEMARKS