FSA1256(A) / FSA1257(A) / FSA1258(A) Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option Features Description FSA1256A, FSA1257A, FSA1258A feature low ICCT when S Input is lower than VCC Maximum 1.1Ω On Resistance (RON) for 4.5V supply 0.4Ω max RON flatness for 4.5V supply The FSA1256, FSA1256A, FSA1257, FSA1257A, FSA1258, and FSA1258A are high performance dual Single Pole/Single Throw (SPST) analog switches. All devices feature ultra low RON of 1.1Ω maximum at 4.5V VCC. The FSA1256, FSA1257, and FSA1258 operate over a wide VCC range of 1.65V to 5.5V. The FSA1256A, FSA1257A, and FSA1258A operation range is 2.7V to 5.5V. These devices are fabricated with sub-micron CMOS technology to achieve fast switching speeds and are designed for break-before-make operation. The select input is TTL level compatible. The FSA1256 and FSA1256A feature two Normally Open (NO) switches. The FSA1257 and FSA1257A feature two Normally Closed (NC) switches. The FSA1258 and FSA1258A have one NO switch and one NC switch. Over-voltage tolerant TTL compatible control input Space saving Pb-Free MicroPak™ packaging Broad VCC operating range: FSA1256, FSA1257, FSA1258: 1.65V to 5.5V FSA1256A, FSA1257A, FSA1258A: 2.7V to 5.5V Fast turn-on and turn-off time FSA1258, FSA1258A feature break-before-make enable circuitry For additional performance information, please contact [email protected]. Applications IMPORTANT NOTE: Cell Phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-Top Box Ordering Information Part Number Top Mark Package Description Packing Method FSA1256L8X EB 8-Lead, MicroPak™, 1.6mm Wide 5000 Units Tape and Reel FSA1256AL8X FN 8-Lead, MicroPak™, 1.6mm Wide 5000 Units Tape and Reel FSA1257L8X EC 8-Lead, MicroPak™, 1.6mm Wide 5000 Units Tape and Reel FSA1257AL8X FP 8-Lead, MicroPak™, 1.6mm Wide 5000 Units Tape and Reel FSA1258L8X ED 8-Lead, MicroPak™, 1.6mm Wide 5000 Units Tape and Reel FSA1258AL8X FS 8-Lead, MicroPak™, 1.6mm Wide 5000 Units Tape and Reel All packages are lead free per JEDEC: J-STD-020B standard. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 www.fairchildsemi.com FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option March 2008 Figure 1. FSA1256, FSA1256A Figure 2. FSA1257, FSA1257A Truth Tables Control Input (s) Function Control Input (s) Function LOW Logic Level Disconnect LOW Logic Level A Connected to B HIGH Logic Level A Connected to B HIGH Logic Level Disconnected Figure 3. FSA1258, FSA1258A Truth Table Control Input, 1S Function Control Input 2S Function LOW Logic Level 1A Connected to 1 B LOW Logic Level Disconnect HIGH Logic Level Disconnect HIGH Logic Level 2A Connected to 2B Pin Descriptions Name Description A, B0, B1 Data Ports S Switch Select Pin © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 www.fairchildsemi.com 2 FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option Analog Symbols Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Supply Voltage (1) VS Switch Voltage Vin (1) Input Voltage Min. Max. Units -0.5 6.0 V -0.5 VCC +0.5 V -0.5 6.0 V 180 mW Power Dissipation at 85°C, MicroPak™ 8L Package IIK Input Diode Current -50 mA ISW Switch Current 200 mA Peak Switch Current (Pulsed at 1ms Duration, <10% Duty Cycle) 400 mA +150 °C ISWPEAK TSTG Storage Temperature Range -65 TJ Maximum Junction Temperature +150 °C TL Lead Temperature (Soldering 10 Seconds) +260 °C ESD Human Body Model (JEDEC: JESD22-A114) FSA1256, FSA1257, FSA1258 5.5 FSA1256A, FSA1257A, FSA1258A 4.5 kV Note: 1. Input and output negative ratings may be exceeded if input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Min. Max. FSA1256, FSA1257, FSA1258 1.65 5.50 FSA1256A, FSA1257A, FSA1258A 2.7 5.5 VCC VCC Supply Voltage VIN Control Input Voltage 0 0 (2) VIN Switch Input Voltage ΘJA Thermal Resistance in Still Air, MicroPak 8L Package (modeled) TA Operating Temperature -40 Units V V VCC V 224 °C/W +85 ºC Note: 2. Unused inputs must be held HIGH or LOW. They must not float. © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 www.fairchildsemi.com 3 FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option Absolute Maximum Ratings All typical values are at 25ºC unless otherwise specified. The 1.65V to 1.95V range applies to FSA1256, FSA1257, and FSA1258 only. Symbol Parameter Conditions TA=-40 to +85°C TA=+25°C VCC (V) Unit Min. Typ. Max. Min. Max. VIH VIL IIN INO(0FF) , INC(0FF) RON ∆RON RFLAT(ON) ICC ICCT Input Voltage High (3) 4.5 to 5.5 2.4 2.7 to 3.6 2.0 1.65 to 1.95 0.9 V 4.5 to 5.5 0.8 2.7 to 3.6 0.4 FSA1256, FSA1257, FSA1258 Only 2.7 to 3.6 0.6 1.65 to 1.95 0.4 Control Input Leakage (S) VIN=0 to VCC 1.95 to 5.5 Off Leakage Current A=1V, 4.5V 1B or 2B=1V, 4.5V 5.5 IOUT=100mA, 1B or 2B=3.5V 4.5 0.95 1.15 1.30 IOUT=100mA, 1B or 2B=1.5V 2.7 2.6 4.0 4.3 IOUT=100mA, 1B or 2B=1.2V 1.65 8.0 9.5 10.5 IOUT=100mA, 1B or 2B=3.5V 4.5 0.06 0.12 0.15 IOUT=100mA, 1B or 2B=0V, 1.0V, 2.0V 4.5 0.2 0.3 0.4 IOUT=100mA, 1B or 2B=0V, 0.75V, 1.5V 2.7 1.4 IOUT=100mA, 1B or 2B=0V, 1.0V, 1.2V 1.65 1.8 5.5 0.1 0.5 1.0 3.6 0.1 0.5 1.0 4.3 0.2 (3) Input Voltage Low Switch On (3,4) Resistance On Resistance Matching Between (3,5) Channels On Resistance (3,6) Flatness FSA1256A, FSA1257A, FSA1258A Only Quiescent Supply Current VIN=0V or VCC, IOUT=0V Increase in Icc per Input One Input at 2.6V, Others at VCC or GND (FSA1256A, FSA1257A, FSA1258A Only) -2 2 V -1 1 µA -20 20 nA Ω Ω Ω 10.0 µA µA Notes: 3. Guaranteed, but not tested for Vcc=1.65V. 4. On resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. 5. ∆ RON=RON max – RON min measured at identical Vcc, temperature, and voltage. 6. Flatness is defined as the difference between the maximum and minimum value of on resistance (RON) over the specified range of conditions. © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 www.fairchildsemi.com 4 FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option DC Electrical Characteristics All typical values are at 25ºC unless otherwise specified. The 1.65V to 1.95V range applies to FSA1256, FSA1257, and FSA1258 only. Symbol Parameter Conditions Min. tON tOFF tBBM Q Turn-On Time Turn-Off Time (7) (7) Break-Before(7) Make Time (7) Min. Unit Figure ns 8 ns 8 ns 9 pC 13 Typ. Max. 4.5 to 5.5 10 35 40 1B or 2B=1.5V, RL=50Ω, CL=35pF 2.7 to 3.6 15 50 60 1B or 2B=1.0V RL=50Ω, CL=35pF 1.65 to 1.95 35 110 120 1B or 2B=3.0V, RL=50Ω, CL=35pF 4.5 to 5.5 4 15 20 1B or 2B=1.5V, RL=50Ω, CL=35pF 2.7 to 3.6 8 20 30 1B or 2B=1.0V RL=50Ω, CL=35pF 1.65 to 1.95 10 30 40 1B or 2B=3.0V, RL=50Ω, CL=35pF 4.5 to 5.5 7 1B or 2B=1.5V, RL=50Ω, CL=35pF 2.7 to 3.6 12 4.5 to 5.5 20 2.7 to 3.6 10 1.65 to 1.95 5 f=1MHz, RL=50Ω, 1.65 to 5.5 -70 dB 11 1B or 2B=3.0V, RL=50Ω, CL=35pF CL=1.0nF, VGEN=0V, RGEN=0Ω Charge (7) Injection TA=-40 to +85°C TA=+25ºC VCC (V) Max. OIRR Off Isolation Xtalk Crosstalk f=1MHz, RL=50Ω, 1.65 to 4.3 -100 dB 12 BW -3db (7) Bandwidth RL=50Ω 1.65 to 4.3 300 MHz 10 THD Total Harmonic (7) Distortion f=20Hz to 20kHz, RL=600Ω, VIN=0.5VPP 1.65 to 4.3 0.002 % 16 (7) Note: 7. Guaranteed, but not tested for Vcc=1.65V. Capacitance TA=+25ºC Symbol Parameter Conditions VCC (V) Min. CIN Typ. Unit Figure Max. Control Pin Input Capacitance f=1MHz 0 3.0 pF 15 COFF B Port Off Capacitance f=1MHz 4.5 11.5 pF 14 CON A Port On Capacitance f=1MHz 4.5 27.0 pF 15 © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 www.fairchildsemi.com 5 FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option AC Electrical Characteristics V ON B0,B1 A GND / ION Figure 4. A I ON Select RON = VON I A(OFF) NC V SW V IN GND Select VS = 0 or VCC GND VS = 0 or Vcc On Resistance Figure 5. Off Leakage (Ports Tested Separately) nBn nA I A(ON) NC V IN A GND RS VS =0 or Vcc Figure 6. RL V OUT GND V IN Select CL V Sel GND GND On Leakage Figure 7. tRISE = 2.5ns Test Circuit Load tFALL = 2.5ns VCC Input - V Sel 10% GND VOH Output-- V OUT VOL Figure 8. © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 90% 90% VCC /2 VCC /2 90% tON 10% 90% tOFF Turn-On / Turn-Off Waveforms www.fairchildsemi.com 6 FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option Test Diagrams FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option Test Diagrams (Continued) tRISE = 2.5ns VCC Input- VSel B0nB1 nA VSW GND CL VIN RL VOUT GND GND 10% 0V VOUT 90% VCC/2 0.9 • VOUT 0.9 • VOUT RS tBBM VSel GND RL and C L are functions of the application environment (50Ω, 75Ω, or 100Ω). CL includes test fixture and stray capacitance. Figure 9. Break-Before-Make Interval Timing Network Analyzer RS GND V IN VS GND VS GND V OUT GND RT GND RS and RT are functions of the application environment (50, 75, or 100 ). Figure 10. Bandwidth Network Analyzer RS V Sel VS GND RT GND GND V OUT GND GND RS and RT are functions of the application environment (50, 75, or 100 ). RT GND Off Isolation= 20 Log (V OUT / V IN) Figure 11. © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 Channel Off Isolation www.fairchildsemi.com 7 Network Analyzer RS V IN GND VS GND VSel GND GND RT GND GND RS and RT are functions of the application environment (50, 75, or 100 ). Figure 12. Crosstalk = 20 Log (VOUT / VIN) Adjacent Channel Crosstalk Generator VCC B RS VS VOUT RT VIN Input – VSEL mA nSn On Off 0V VOUT CL GND Off ΔVOUT GND VOUT VSEL CL includes test fixture and stray capacitance GND Figure 13. Charge Injection Test B0,B1 nBn Select f=1MHz VS = 0 or VCC f=1MHz Figure 14. Capacitance Meter Select Capacitance Meter Q = ΔVOUT • CL VS = 0 or VCC nBn B0nB1 Channel Off Capacitance Figure 15. Channel On Capacitance Audio Analyzer RS GND VIN VS GND VCNTRL GND VCNTRL = 0 or Vcc GND GND RS and RT are functions of the application environment. Figure 16. © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 VOUT RT Total Harmonic Distortion www.fairchildsemi.com 8 FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option Test Diagrams (Continued) 0.10 2X C A 1.6 B 1.6 INDEX AREA 0.10 2X C TOP VIEW 0.55 MAX 0.05 0.05 0.00 DETAIL A 8X(0.09) C 8X 0.05 Recommended Landpattern C (0.20) 1.0 2 1 4 (0.1) C 8 0.35 0.25 3X(0.2) 0.35 0.25 0.5 3 4 7 6 5 (0.15) 0.15 8X 0.25 0.10 0.05 C A B C 0.35 0.25 DETAIL A PIN #1 TERMINAL SCALE: 2X BOTTOM VIEW Notes: 1. PACKAGE CONFORMS TO JEDEC MO-255 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y.14M-1994 4. PIN 1 FLAG, END OF PACKAGE OFFSET 5. DRAWING FILE NAME: MKT-MAC08AREV4 MAC08AREV4 Figure 17. 8-Lead MicroPak™, 1.6mm Wide For tape and reel specifications for MicroPak, please visit: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/ © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 www.fairchildsemi.com 9 FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option Physical Dimensions FSA1256(A) / FSA1257(A) / FSA1258(A) — Low-RON Low-Voltage, Dual SPST Analog Switch with Low-ICCT “A” Option © 2004 Fairchild Semiconductor Corporation FSA1256(A) / FSA1257(A) / FSA1258(A) Rev. 1.0.5 www.fairchildsemi.com 10