Click to see this datasheet in Simplified Chinese! FSA201 — USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Features Description 3Ω Typical ON Resistance Power-off Protection on Common D+/R, D-/L Ports The FSA201 is a Double-Pole, Double Throw (DPDT) multiplexer that combines a low-distortion audio and a USB2.0 Full-Speed (FS) switch path. This configuration enables audio and USB data to share a common connector port. The architecture is designed to allow audio signals to swing below ground. This means a common USB and headphone jack can be used for personal media players and similar portable peripheral devices. -3db Bandwidth: > 250MHz Low Power Consumption Packaged in Pb-free 10-pin MSOP and 10-Lead MicroPak™ (1.6 x 2.1mm) Automatically Detects VBUS for Switch Path Selection Applications Cell Phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-Top Box Since USB2.0 is an industry standard for shared datapath in portable devices, the FSA201 also incorporates a VBUS detection capability. The FSA201 includes a power-off feature to minimize current consumption when VBUS is not present. This power-off circuitry is available for the common D+/R, D-/L ports only. Typical applications involve switching in portables and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers. Ordering Information Part Number Package Number Pb-Free Packing Description FSA201L10X MAC010A Yes 10-Lead MicroPak, JEDEC MO-255, 1.6 x 2.1mm FSA201MUX MUA10A Yes 10-Lead MSOP, JEDEC MO-187, 3.0mm Wide Vbus ASel Switch Select Control Circuitry Vaudio Rpd D+ GND D+/R R D-- D-/L L Figure 1. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 FSA201 Analog Symbol www.fairchildsemi.com FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability April 2007 Vbus 10 D+ 1 9 ASel D-- 2 8 D+/R R 3 7 D-/L 4 L 6 Vaudio D+ 1 10 Vbus D- 2 9 ASel R 3 8 D+/R L 4 7 D-/L 5 6 Vaudio GND 5 GND Figure 2. MicroPak™ 10-Pin Figure 3. MSOP 10-Pin Pin Descriptions Pin # Name Description 1, 2 D+, D- USB data bus input sources 6 VAUDIO Power supply (audio) 3, 4 R, L Audio right and left input sources 9 ASEL Audio select to override auto USB detect when VAUDIO supply is present 10 VBUS Power supply (USB) and auto USB switch-path select 8, 7 D+/R, D-/L USB and audio common connector ports Truth Table ASEL(1) VAUDIO VBUS L, R D+, D- Low Low Low OFF OFF OFF ON Low Low (2) High (2) Low High Low ON OFF Low High (2) High (2) OFF ON High Low Low OFF OFF OFF ON High Low (2) High High High High (2) High (2) Low ON OFF High (2) ON OFF Notes: 1. ASEL- Internal resistor to GND provides auto-VBUS detect if there is no external connection. Forcing ASEL HIGH when VAUDIO is present overrides the USB path even if VBUS is present. 2. H - Value is the threshold as defined to meet USB2.0 VBUS requirements and audio supply threshold in a system (see DC Tables). © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 2 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Pin Assignments The FSA201 is a combined USB and audio switch that enables sharing the D+/D- lines of a USB connector with stereo audio CODEC outputs. The switch is optimized for full-speed USB signals and includes an automatic VBUS-detection circuit. When a USB connector, rather than a headphone, is connected to the ultra-portable device the switch is automatically configured for fullspeed USB data transfer. If no VBUS is detected, and yet VAUDIO is present, the switch is configured for the lowdistortion audio switch path. The audio switch path also handles negative signals (down to -2V), which eliminates the need for large coupling capacitors. terminated by a resistor to GND (typical value 3MΩ) and requires no connection for the standard ultra-portable (cell-phone, MP3, or Portable Media Player). In an application where the supply to the FSA201 VBUS pin is not guaranteed to be removed, a GPIO pin can be used to switch out of full-speed USB mode into audio mode, using the ASEL pin. The FSA201 VBUS pin must be connected directly to VBUS or a supply > 3.8V, not an LDO regulated down to 3.6V or a Vbat-generated supply that may fall below 3.8V in normal operation (see the Application Diagram). For those applications where the VBUS is generated as a self-powered device or where VBUS is not removed, the ASEL pin provides the ability to switch, under software control, to the audio path. The ASEL pin is internally Application Diagram Vbus 3.0V - 3.6V Vaudio FS-USB Source Switch Select Control Circuitry 5V D+/R Vbus Rpd D+ GND R D- Audio CODEC ASel D-/L USB Mini -AB Connector ID L GND Figure 4. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 Application Diagram www.fairchildsemi.com 3 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Functional Description Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Parameter Conditions VAUDIO Supply Voltage -0.5V to 6.0V VBUS Supply Voltage Symbol VSW ASEL IIK ISW ISWPEAK TSTG -0.5V to 6.0V R, L Pins Switch I/O Voltage(3) (VAUDIO- 7.0V) to (VAUDIO+ 0.3V) D+, D-, D+/R, D-/L Pins (VBUS - 7.0V) to (VBUS+ 0.3V) (3) Control Input Voltage -0.5V to + 6.0V Input Clamp Diode Current - 50mA Switch I/O Current (Continuous) Peak Switch Current (Pulsed at 1ms Duration, <10% Duty Cycle) USB 50mA Audio 250mA USB 100mA Audio 500mA Storage Temperature Range -65°C to +150°C TJ Maximum Junction Temperature +150°C TL Lead Temperature (Soldering, 10 seconds) +260°C ESD Human Body Model (JEDEC: JESD22-A114) I/O to GND 10kV All Other Pins 8kV Charged Device Model (JEDEC: JESD22-C101) 2kV Note: 3. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Minimum Maximum VAUDIO Supply Voltage Parameter 2.7V 3.6V VBUS Supply Voltage 4.25V 5.50V ASEL Control Input Voltage 0V VAUDIO VSW Switch I/O Voltage VAUDIO– 6.5V VAUDIO– 0.3V -40ºC 85ºC TA Operating Temperature θJA Thermal Resistance (free air) © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 MicroPak 10 330ºC / W (estimated) www.fairchildsemi.com 4 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Absolute Maximum Ratings All typical values are at 25ºC unless otherwise specified. Symbol Parameter VAUDIO (V) Conditions TA = - 40ºC to +85ºC Min. Typ. Max. Unit Common Pins VIK Clamp Diode Voltage 2.7 VIH Control Input Voltage HIGH 2.7 to 3.6 VIL Control Input Voltage LOW 2.7 to 3.6 IIN ASEL Input HIGH Current IOFF INO(0FF) Power Off Leakage Current (Common Port Only D+/R, D-/L) Off Leakage Current of Port D+, D-, R, L 3.6 VAUDIO = VBUS = 0V 3.6 IIK = -18mA -1.2 V 1.3 0.5 VCNTRL = 0V to 3.6V -3 Common Port (D+/R, D-/L) VSW = 0V to 5.5V VBUS = 0V, 5. 5V D+/R, D-/L = 0.3V, VAUDIO – 0.3V D+, D-, R, L = 0.3V, VAUDIO –0.3V or Floating 3 µA 1 µA -50 10 50 nA -100 50 100 nA 3.6 V 6 Ω See Figure 14 INC(0N) On Leakage Current of Port D+/R or D-/L USB Switch Path 3.6 VBUS = 0V, 5.5V D+/R, D-/L = 0.3V, VAUDIO – 0.3V D+, D-, R, L = Floating See Figure 15 VBUS (V) USB Analog Signal Range RONUSB ∆ RONUSB 0 FS Switch On Resistance(4) 4.25 FS Delta RON(4,6) 4.25 Audio Switch Path VD+/D- = 0V, 3.0V, ION = -8mA VD+/D- = 3V, ION = -8mA 0.35 Ω VAUDIO (V) Audio Analog Signal Range VAUDIO – 6.5 VL/R = -2V, 0V, 0.7V, VAUDIO-0.7V, VAUDIO ION = -100mA, VBUS = 0V Audio Switch On Resistance(7) 2.7 ∆ RONAudio Audio Delta RON(4) 2.7 VL/R = 0.7V ION = -100mA RFLAT(Audio) Audio RON Flatness(5) 2.7 VL/R = -2V, 0V, 0.7V, 2V, 2.7V ION = -100mA RONAUDIO 3 See Figures 6, 13 VAUDIO V 0.5 1.0 Ω 0.01 0.1 Ω 0.35 Ω See Figures 5, 13 Notes: 4. ∆ RON=RON max – RON min measured at identical VCC, temperature, and voltage. Worst-case signal path, audio or USB channel, is characterized. 5. Flatness is defined as the difference between the maximum and minimum values of on resistance over the specified range of conditions. 6. Guaranteed by characterization, not production tested. 7. On resistance is determined by the voltage drop between the A and B pins at the indicated current through the switch. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 5 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability DC Electrical Characteristics All typical values are at 25ºC unless otherwise specified. Symbol Parameter VAUDIO (V) Conditions TA = - 40ºC to +85ºC Min. Typ. Max. Unit Power Supply Vbusth VBUS Threshold Voltage 3.2 3.8 V Vaudioth VAUDIO Threshold 0.5 1.5 V ICC(Audio) Quiescent Supply Current (Audio) VASEL = 0 to VAUDIO, IOUT = 0 10 µA ICC(VBUS) Quiescent Supply Current (VBUS) VASEL = 0 to VAUDIO, IOUT = 0 VBUS = 5.5V 20 µA VASEL = 2.6V, VBUS = floating 15 VASEL = 1.8V, VBUS = floating 18 ICCT Increase in ICC Current per Control Voltage and VCC © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 3.0 3.0 µA www.fairchildsemi.com 6 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability DC Electrical Characteristics (Continued) All typical value are for VAUDIO = 3.3V and VBUS = 5.0 at 25ºC unless otherwise specified. Symbol TONAUDIO1 TOFFAUDIO1 TONAUDIO2 TOFFAUDIO2 TONAUDIO3 TONUSB TOFFUSB TPDUSB OIRRUSB OIRRA XtalkUSB XtalkA BW THD PSRR Parameter Turn-On Time VAUDIO↑ to Output VAUDIO/VBUS (V) Turn-On Time ASEL to Output VBUS = 4.25V VAUDIO = 2.7 Turn-Off Time ASEL to Output VBUS = 4.25V VAUDIO = 2.7 Turn-On Time VBUS↓ to Output VAUDIO = 2.7 Turn-On Time VUSB↑ to Output VAUDIO = 2.7 Turn-Off Time VUSB↓ to Output VAUDIO = 2.7 USB Switch Propagation Delay(8) VAUDIO = 2.7 VBUS = 4.25V Off-isolation - USB VAUDIO = 2.7 VBUS = 4.25V Typ. Max. Unit 10 μs VD+/R, D-/L = 1.0V RL = 50Ω, CL = 50pF 10 μs 1 μs 1 μs 10 μs 10 μs 10 μs See Figures 16, 18 VD+/R, D-/L = 1.0V RL = 50Ω, CL = 50pF See Figures 16, 17 VD+/R, D-/L = 1.0V RL = 50Ω, CL = 50pF See Figures 16, 18 VD+/R, D-/L = 1.0V RL=50Ω, CL= 50pF See Figures 16, 17 VD+/R, D-/L = 1.0V RL = 50Ω, CL = 50pF See Figures 16, 18 VD+/R, D-/L = 1.0V RL = 50Ω, CL = 50pF See Figures 16, 18 RL = 50Ω, CL = 50pF See Figure 19 f = 6MHz, RT = 50Ω, CL = 0pF VAUDIO = 2.7 VBUS = 4.25V Non-Adjacent Channel Crosstalk - Audio VAUDIO = 2.7 VBUS = 4.25V -3db Bandwidth VAUDIO = 2.7 VBUS = 4.25V 0.25 ns -55 dB -37 dB -49 dB -39 dB 400 MHz 0.05 % -56 dB See Figures 8, 23 f = 6MHz, RT = 50Ω, CL = 0pF VAUDIO = 2.7 VBUS = 4.25V Non-Adjacent Channel Crosstalk - USB Power Supply Rejection Ratio Min. See Figures 16, 18 VAUDIO = 2.7 for VBUS ↑ Total Harmonic Distortion TA = - 40°C to +85°C VD+/R, D-/L = 1.0V RL = 50Ω, CL = 50pF VBUS = 0V Turn-Off Time VBUS↑ to Output Off-Isolation - Audio Conditions See Figures 7, 23 f = 6MHz, RT = 50Ω, CL = 0pF See Figures 10, 24 f = 6MHz, RT = 50Ω, CL = 0pF See Figures 9, 24 RT = 50Ω, CL = 0pF, Signal 0dBm See Figures 11, 12, 22 f = 20Hz to 20kHz, RL = 32Ω, VR,L = 2Vpp VAUDIO = 2.7 VBUS = 0V See Figure 27 f = 217Hz on VAUDIO VR,L = 1.0V, RT = 32Ω, VRipple = 600mVpp VAUDIO = 3.3 VBUS = 0V Note: 8. Guaranteed by characterization, not production tested. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 7 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability AC Electrical Characteristics Symbol tSK(o) VAUDIO / VBUS(V) Parameter (9) Channel-to-Channel Skew VAUDIO = 2.7V VBUS = 4.25V Conditions TA = -40ºC to +85ºC Min. tR = tF = 12ns (10-90%) at 6MHz CL = 50pF, RL = 50Ω Typ. Max. Unit 150 ps 150 ps 1.6 ns See Figures 20, 21 tSK(P) Skew of Opposite Transitions of the Same Output(9) VAUDIO = 2.7V VBUS = 4.25V tR = tF = 12ns (10-90%) at 6MHz CL = 50pF, RL = 50Ω See Figures 20, 21 tJ Total Jitter(9) VAUDIO = 2.7V VBUS = 4.25V RL = 50Ω, CL = 50pF, tR = tF = 12ns (10-90%) at 12Mbps (PRBS = 215 – 1) Note: 9. Guaranteed by characterization, not production tested. Capacitance Symbol CIN (ASEL) CON(D+/R, D-/L) Parameter Control Pin Input Capacitance (ASEL) D+/R, D-/L (Common Port) On Capacitance TA = -40ºC to +85ºC VAUDIO / VBUS(V) Conditions VAUDIO = 2.7V VBUS = 4.25V VBias = 0.2V 2.5 VBias = 0.2V f = 6MHz 25 VAUDIO = 2.7V VBUS = 4.25V ASEL = 0V (CONUSB) VAUDIO = 2.7V VBUS = 4.25V ASEL = 2.7V (CONAudio) Min. Typ. Max. Unit pF See Figure 26 pF VBias = 0.2V f = 6MHz 29 See Figure 26 COFF(D+, D-) USB Input Source Off Capacitance VAUDIO = 2.7V VBUS = 4.25V ASEL = 2.7V f = 6MHz See Figure 25 5 pF COFF(R/L) Audio Input Source Off Capacitance VAUDIO = 2.7V VBUS = 4.25V ASEL =0V f = 6MHz See Figure 25 17 pF © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 8 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability USB Full-Speed Related AC Electrical Characteristics 0.80 RON (ohms) 0.70 0.60 0.50 0.40 25°C -40°C 0.30 85°C 0.20 0.10 0.00 -4 -3 -2 -1 0 1 2 3 4 VIN (V) Figure 5. RON Audio Characterization (RON Audio R, VAUDIO = 2.7V) 7 RON ( ohms) 6 5 - 40°C 25°C 85°C 4 3 2 1 0 -1 0 Figure 6. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 1 2 VIN (V) 3 4 5 RON USB Characterization (RON USB D+) www.fairchildsemi.com 9 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Typical Characteristics 1 10 100 1000 0 Off Isolation (dB) -10 -20 -30 -40 -50 -60 -70 -80 Frequency (MHz) Figure 7. Off-Isolation (Audio) Characterization, Frequency Response at VCC (VAUDIO) = 2.7V Off Isolation (dB) 1 10 100 1000 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 Frequency (MHz) Figure 8. Off-Isolation (USB) Characterization, Frequency Response at VCC (VBUS) = 4.25V © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 10 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Typical Characteristics (Continued) 1 10 100 1000 Crosstalk (dB) 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 Frequency (MHz) Figure 9. Figure 10. Non-Adjacent Channel Crosstalk (Audio) Characterization at VCC (VAUDIO) = 2.7V Non-Adjacent Channel Crosstalk (USB) Characterization at VCC (VBUS) = 4.25V © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 11 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Typical Characteristics (Continued) Figure 11. Bandwidth Characterization, Frequency Response at CL = 0pF, VCC (VAUDIO) = 2.7V Figure 12. Bandwidth Characterization, Frequency Response at CL = 0pF, VCC (VBUS) = 4.25V © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 12 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Typical Characteristics (Continued) VON I (OFF) A Dn or R/L V sw D+/R or D-/L V SW I ON GND D+/R or D-/L - GND D+, D-or R/L GND V CNTRL = RON= VON / ION Figure 13. V CNTRL = fn (Vaudio and Vbus) On Resistance Figure 14. fn (Vaudio and Vbus) Off Leakage D+, D-- or R,L D+/R or D-/L - V OUT D+, D-- or R/L I A(ON) CL A D+/R or D-/L GND V sw Figure 15. RL , RS and CL are function of application environment (see AC Tables for specific values) CL includes test fixture and stray capacitance On Leakage Figure 16. AC Test Circuit Load tFALL = 2.5ns tRISE = 1µs 3V 3 90% Input - V ASel GND fn (Vaudio and Vbus) GND fn (Vaudio and Vbus) tRISE = 2.5ns V sw GND V CNTRL = GND V CNTRL = RL RS 10% 50% 50% Vbus 10% Input - V CNTRL V OH 90% 90% GND Output - V OUT V OL tFALL = 1µs 90% 10% 90% Vth(max)) Vth(min) 10% V OH 90% tON V OL V CNTRL = Figure 17. Turn-On / Turn-Off Waveforms (ASEL) © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 90% Output - VOUT tOFF Vth = Vbusth or V audioth tON tOFF fn (Vaudio and Vbus) Figure 18. Turn-On / Turn-Off Waveforms (USB/Audio) www.fairchildsemi.com 13 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Test Diagrams tRISE = 12ns tFALL = 12ns tRISE = 12ns 3V 90% Input – V D+/D-GND 10% 3V 90% 50% 50% Input – V D+/D- 10% 10% GND V OH Figure 19. 90% 50% 90% 50% 10% V OH Output-- V OUT V OL tFALL = 12ns Output-- V OUT 50% 50% tpLH V OL tpHL USB Switch Propagation Delay Waveforms Figure 20. tRISE = 12ns 50% 50% tpLH tpHL Pulse Skew: tSK(P) = | tPHL – tPLH | tFALL = 12ns 3V Input – V D+/DGND 10% 90% 90% 50% 50% 10% V OH Output1-- V OUT V OL 50% 50% tpLH1 tpHL1 t sk (o) V OH Output2-- V OUT V OL Figure 21. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 50% 50% tpLH2 tpHL2 Output Skew: tSK(O) = | tPLH1 – tPLH2 | or | tPHL1 – tPHL2 | www.fairchildsemi.com 14 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Test Diagrams (Continued) Network Analyzer RS V IN GND VS GND V CNTRL GND VCNTRL= fn (Vaudio and Vbus) GND V OUT RT GND RS and RT are functions of the application environment (see AC Tables for specific values ) Figure 22. USB Bandwidth Network Analyzer RS V CNTRL GND V CNTRL = V IN GND RT VS GND GND V OUT fn (Vaudio andVbus) GND RT RS and RT are functions of the application environment (see AC Tables for specific values) GND OFF-Isolation = 20 Log (VOUT / VIN ) Figure 23. Channel Off Isolation Network Analyzer NC RS GND V IN VS V CNTRL GND GND RT GND V CNTRL = fn Vaudio and Vbus) GND RS and RT are functions of the application environment (see AC Tables for specific values) RT V OUT GND CROSSTALK = 20 Log (VOUT / VIN ) Figure 24. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 Non-Adjacent Channel-to-Channel Crosstalk www.fairchildsemi.com 15 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Test Diagrams (Continued) FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Test Diagrams (Continued) Dn or R/L or D+/R or D-/L Capacitance Meter VCNTRL= Dn or R/L or D+/R or D-/L - f = 6MHz Figure 25. Capacitance Meter fn (VAUDIO and VBUS) Channel Off Capacitance Dn or R/L or D+/R or D-/L V CNTRL = f = 6MHz fn (Vaudio and Vbus) Dn or R/L or D+/R or D-/L Figure 26. Channel On Capacitance Audio Analyzer RS GND V IN VS GND V CNTRL GND VCNTRL = fn (Vaudio and Vbus) GND RT V OUT GND RS and RT are functions of the application environment (see AC Tables for specific values) Figure 27. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 Total Harmonic Distortion www.fairchildsemi.com 16 Tape Format for MicroPak™ Dimensions are in millimeters unless otherwise noted. Package Designator Tape Section Number Cavity Leader (Start End) 125 (typical) L10X Cavity Status Cover Tape Status Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typical) Empty Sealed Reel Dimensions Dimensions are in inches (millimeters) unless otherwise noted. Tape Size (8mm) A B C D N W1 W2 W3 7.0 0.059 0.512 0.795 2.165 0.331 +0.590/0.000 0.567 W1 + 0.078/0.039 (177.8) (1.50) (13.0) (20.20) (55.00) (8.40 +1.50/-0.00 (14.40) (W1+ 2.00/-1.00) © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 17 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Tape and Reel Specification FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Tape and Reel Specification Tape Dimensions for MSOP Dimensions are in millimeters unless otherwise specified. Reel Dimensions for MSOP Dimensions are in inches (millimeters) unless otherwise specified. Tape Size A B C 13 0.059 (12mm) (330) (1.5) © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 D N 0.512 0.795 7.008 (13) (20.2) (178) W1 W2 W3 0.448 0.724 0.486-0.606 (12.4) (18.4) (11.9-15.4) www.fairchildsemi.com 18 Dimensions are in millimeters unless otherwise noted. 2X 0.10 C 2.10 B A 6 9 0.25 0.11 1.47 1.60 1.75 1.50 1.25 1.00 0.75 0.50 1.12 0.24 1.86 1.12 0.86 1.51 0.61 PIN#1 IDENT 2X 1 0.10 C 4 TOP VIEW 0.35 (10X) 0.25 (10X) LAND PATTERN RECOMENDATION 0.55 MAX 0.05 C 0.050.00 C 0.75 (0.09) 0.05 C 0.50 0.25 (0.10) 10X 0.35 0.25 (0.20) NOTES: 0.15 10X 0.25 1.50 BOTTOM VIEW A. PACKAGE CONFORMSTO JEDEC MO255,VARIATION UABD B. DIMENSIONSARE IN MILLIMETERS. C. DIMENSIONSAND TOLERANCES CONFORMSTO ASME Y14.5M, 1994. MAC010ARevC Figure 28. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 10-Lead MicroPak™ www.fairchildsemi.com 19 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Physical Dimensions FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 29. © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 10-Lead Molded Small Outline Package (MSOP) www.fairchildsemi.com 20 FSA201 ⎯ USB2.0 Full-Speed and Audio Switches with Negative Signal Capability © 2006 Fairchild Semiconductor Corporation FSA201 Rev. 1.2.1 www.fairchildsemi.com 21