LM1458/LM1558 Dual Operational Amplifier General Description Features The LM1458 and the LM1558 are general purpose dual operational amplifiers. The two amplifiers share a common bias network and power supply leads. Otherwise, their operation is completely independent. The LM1458 is identical to the LM1558 except that the LM1458 has its specifications guaranteed over the temperature range from 0˚C to +70˚C instead of −55˚C to +125˚C. n n n n n n No frequency compensation required Short-circuit protection Wide common-mode and differential voltage ranges Low-power consumption 8-lead can and 8-lead mini DIP No latch up when input common mode range is exceeded Connection Diagrams Metal Can Package Dual-In-Line Package 00788602 Top View Order Number LM1558H, LM1558H/883 or LM1458H See NS Package Number H08C © 2003 National Semiconductor Corporation DS007886 00788603 Top View Order Number LM1558J/883, LM1458M, LM1458MX or LM1458N See NS Package Number J08A, M08A or N08E www.national.com LM1458/LM1558 Dual Operational Amplifier August 2003 LM1458/LM1558 Absolute Maximum Ratings Storage Temperature Range (Note 1) −65˚C to +150˚C Lead Temperature (Soldering, 10 sec.) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. 260˚C Soldering Information Dual-In-Line Package (Note 5) Soldering (10 seconds) Supply Voltage 260˚C Small Outline Package ± 22V ± 18V LM1558 LM1458 Power Dissipation (Note 2) LM1558H/LM1458H 500 mW LM1458N 400 mW Input Voltage (Note 3) Output Short-Circuit Duration 215˚C Infrared (15 seconds) 220˚C See AN-450 “Surface Mounting Methods and Their Effect on Product Reliability” for other methods of soldering surface mount devices. ± 30V ± 15V Differential Input Voltage Vapor Phase (60 seconds) ESD tolerance (Note 6) 300V Continuous Operating Temperature Range LM1558 LM1458 −55˚C to +125˚C 0˚C to +70˚C Electrical Characteristics (Note 4) Parameter Conditions LM1558 Min Typ LM1458 Max Min Typ Units Max Input Offset Voltage TA = 25˚C, RS ≤ 10 kΩ 1.0 5.0 1.0 6.0 mV Input Offset Current TA = 25˚C 80 200 80 200 nA 200 500 200 500 Input Bias Current TA = 25˚C Input Resistance TA = 25˚C Supply Current Both TA = 25˚C, VS = ± 15V 0.3 1.0 3.0 0.3 5.0 1.0 3.0 nA MΩ 5.6 mA Amplifiers Large Signal Voltage Gain TA = 25˚C, VS = ± 15V 50 160 20 160 V/mV VOUT = ± 10V, RL ≥ 2 kΩ Input Offset Voltage RS ≤ 10 kΩ 6.0 7.5 mV Input Offset Current 500 300 nA Input Bias Current 1.5 0.8 Large Signal Voltage Gain VS = ± 15V, VOUT = ± 10V Output Voltage Swing VS = ± 15V, RL = 10 kΩ 25 15 µA V/mV RL ≥ kΩ ± 14 ± 13 V Input Voltage Range ± 12 ± 10 ± 12 ± 14 ± 13 VS = ± 15V ± 12 ± 10 ± 12 Common Mode RS ≤ 10 kΩ 70 90 70 90 dB RS ≤ 10 kΩ 77 96 77 96 dB RL = 2 kΩ V V Rejection Ratio Supply Voltage Rejection Ratio Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. Note 2: The maximum junction temperature of the LM1558 is 150˚C, while that of the LM1458 is 100˚C. For operating at elevated temperatures, devices in the H08 package must be derated based on a thermal resistance of 150˚C/W, junction to ambient or 20˚C/W, junction to case. For the DIP the device must be derated based on a thermal resistance of 187˚C/W, junction to ambient. Note 3: For supply voltages less than ± 15V, the absolute maximum input voltage is equal to the supply voltage. Note 4: These specifications apply for VS = ± 15V and −55˚C ≤ TA ≤ 125˚C, unless otherwise specified. With the LM1458, however, all specifications are limited to 0˚C ≤ TA ≤ 70˚C and VS = ± 15V. Note 5: Refer to RETS 1558V for LM1558J and LM1558H military specifications. Note 6: Human body model, 1.5 kΩ in series with 100 pF. www.national.com 2 LM1458/LM1558 Schematic Diagram 00788601 Numbers in parentheses are pin numbers for amplifier B. 3 www.national.com LM1458/LM1558 Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) Order Number LM1558H, LM1558H/883 or LM1458H NS Package Number H08C Small Outline Package (M) Order Number LM1458M or LM1458MX NS Package Number M08A www.national.com 4 LM1458/LM1558 Dual Operational Amplifier Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Molded Dual-In-Line Package (N) Order Number LM1458N NS Package Number N08E LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Americas Customer Support Center Email: [email protected] Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Français Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Support Center Email: [email protected] National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: [email protected] Tel: 81-3-5639-7560 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.