2SA1576ART1 General Purpose Amplifier Transistors PNP Surface Mount • Moisture Sensitivity Level: 1 http://onsemi.com MAXIMUM RATINGS (TA = 25°C) Symbol Value Unit Collector−Base Voltage V(BR)CBO 60 Vdc Collector−Emitter Voltage V(BR)CEO 50 Vdc Emitter−Base Voltage V(BR)EBO 7.0 Vdc IC 100 mAdc IC(P) 200 mAdc Rating Collector Current − Continuous Collector Current − Peak COLLECTOR 3 1 BASE 2 EMITTER THERMAL CHARACTERISTICS Symbol Max Unit Power Dissipation Characteristic PD 200 mW Junction Temperature TJ 150 °C Storage Temperature Tstg −55 to +150 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 3 MARKING DIAGRAM 1 76 M 2 SC−70 CASE 419 76 M = Specific Device Code = Date Code ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Collector−Emitter Breakdown Voltage (IC = 2.0 mAdc, IB = 0) ORDERING INFORMATION Symbol Min Max Unit V(BR)CEO 50 − Vdc Collector−Base Breakdown Voltage (IC = 10 Adc, IE = 0) V(BR)CBO 60 − Vdc Emitter−Base Breakdown Voltage (IE = 10 Adc, IC = 0) V(BR)EBO 7.0 − Vdc Collector−Base Cutoff Current (VCB = 60 Vdc, IE = 0) ICBO − 0.1 Adc Collector−Emitter Cutoff Current (VCE = 10 Vdc, IB = 0) (VCE = 30 Vdc, IB = 0) (VCE = 30 Vdc, IB = 0, TA = 80°C) ICEO − − − 0.1 2.0 1.0 Adc Adc mAdc DC Current Gain (Note 1) (VCE = 6.0 Vdc, IC = 2.0 mAdc) hFE 180 390 − 0.5 Collector−Emitter Saturation Voltage (IC = 100 mAdc, IB = 10 mAdc) VCE(sat) Device* Package Shipping† 2SA1576ART1 SC−70 3000/Tape & Reel *The “T1” suffix refers to a 7 inch reel. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. − Vdc 1. Pulse Test: Pulse Width ≤ 300 s, D.C. ≤ 2%. Semiconductor Components Industries, LLC, 2004 July, 2004 − Rev. 2 1 Publication Order Number: 2SA1576ART1/D 2SA1576ART1 PACKAGE DIMENSIONS SC−70 CASE 419−04 ISSUE L A L NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3 B S 1 2 D G 0.05 (0.002) J N C DIM A B C D G H J K L N S INCHES MIN MAX 0.071 0.087 0.045 0.053 0.032 0.040 0.012 0.016 0.047 0.055 0.000 0.004 0.004 0.010 0.017 REF 0.026 BSC 0.028 REF 0.079 0.095 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.00 0.30 0.40 1.20 1.40 0.00 0.10 0.10 0.25 0.425 REF 0.650 BSC 0.700 REF 2.00 2.40 K H SOLDERING FOOTPRINT 0.65 0.025 0.65 0.025 1.9 0.075 0.9 0.035 SCALE 10:1 0.7 0.028 mm inches ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 2 For additional information, please contact your local Sales Representative. 2SA1576ART1/D/D