TOSHIBA DF3A3.3FV

DF3A3.3FV
TOSHIBA Diodes for Protecting against ESD Epitaxial Planar Type
DF3A3.3FV
Product for Use Only as Protection against Electrostatic
Discharge (ESD).
Characteristics
Symbol
Rating
Unit
Power dissipation
P*
150
mW
Junction temperature
Tj
150
°C
Tstg
−55 ~ 150
°C
Storage temperature range
0.22±0.05
1
2
0.32±0.05
3
0.13±0.05
0.4
0.8±0.05
0.5±0.05
Absolute Maximum Ratings (Ta = 25°C)
1.2±0.05
0.4
The mounting of two devices on an ultra-compact package reduces the
number of parts and lowers assembly cost.
1.2±0.05
•
0.8±0.05
* This product is for protection against electrostatic discharge (ESD) only
and is not intended for any other usage, including without limitation,
the constant voltage diode application.
Unit: mm
1. CATHODE1
2. CATHODE2
3. ANODE
VESM
Note: Using continuously under heavy loads (e.g. the application of high
JEDEC
⎯
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
JEITA
⎯
reliability significantly even if the operating conditions (i.e.
TOSHIBA
1-1Q1B
operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Weight: 0.0015 g (typ.)
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and
estimated failure rate, etc).
*: Mounted on FR4 board (25.4 mm × 25.4 mm × 1.6 mmt)
0.5mm
0.45mm
0.45mm
0.4mm
Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Zener voltage
VZ
IZ = 5 mA
3.1
3.3
3.5
V
Dynamic impedance
ZZ
IZ = 5 mA
―
―
130
Ω
Reverse current
IR
VR = 1.5 V
―
―
100
μA
Terminal capacitance
(between Cathode and Anode)
CT
VR = 0, f = 1MHz
―
115
―
pF
1
2007-11-01
DF3A3.3FV
Guaranteed Level of ESD Immunity
Test Condition
ESD Immunity Level
IEC61000-4-2
(Contact discharge)
± 30 kV
Criterion: No damage to device elements
Marking
Equivalent Circuit (top view)
3.3
CT - VR
IZ - VZ
100
1000
TOTAL CAPACITANCE CT (pF)
ZENER CURRENT IZ (mA)
Ta=25°C
10
1
0
0.1
0.010
0
0.001
f=1MHz
Ta=25°C
100
10
0
1
2
3
4
5
6
7
8
ZENER VOLTAGE VZ (V)
9
10
0
1
2
3
4
5
REVERSE VOLTAGE VR (V)
2
2007-11-01
DF3A3.3FV
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
3
2007-11-01