Revised March 2005 74LCXR2245 Low Voltage Bidirectional Transceiver with 5V Tolerant Inputs and Outputs and 26: Series Resistors on Both A and B Ports General Description Features The LCXR2245 contains eight non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus oriented applications. The device is designed for low voltage (2.5V and 3.3V) VCC applications with capability of interfacing to a 5V signal environment. The T/R input determines the direction of data flow through the device. The OE input disables both the A and B ports by placing them in a high impedance state. The 26: series resistor helps reduce output overshoot and undershoot. ■ 5V tolerant inputs and outputs The LCXR2245 is fabricated with an advanced CMOS technology to achieve high speed operation while maintaining CMOS low power dissipation. ■ Latch-up performance exceeds 500 mA ■ 2.3V–3.6V VCC specifications provided ■ 8.0 ns tPD max (VCC 3.3V), 10 PA ICC max ■ Power down high impedance inputs and outputs ■ Supports live insertion/withdrawal (Note 1) ■ r12 mA output drive (VCC 3.0V) ■ Implements patented noise/EMI reduction circuitry ■ Equivalent 26: series resistor on all outputs ■ ESD performance: Human body model ! 2000V Machine model ! 200V Note 1: To ensure the high-impedance state during power up or down, OE should be tied to VCC through a pull-up resistor: the minimum value or the resistor is determined by the current-sourcing capability of the driver. Ordering Code: Order Number Package Package Description Number 74LCXR2245WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 74LCXR2245SJ M20D Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LCXR2245MSA MSA20 74LCXR2245MTC MTC20 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74LCXR2245MTCX_NL (Note 2) MTC20 Pb-Free 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B> Note 2: “_NL” indicates Pb-Free package (per JEDEC J-STD-020B). Device available in Tape and Reel only. © 2005 Fairchild Semiconductor Corporation DS500361 www.fairchildsemi.com 74LCXR2245 Low Voltage Bidirectional Transceiver with 5V Tolerant Inputs and Outputs and 26: Series Resistors on Both A and B Ports October 2000 74LCXR2245 Logic Symbol Connection Diagram Pin Descriptions Pin Names Description OE Output Enable Input T/R Transmit/Receive Input A0–A7 Side A Inputs or 3-STATE Outputs B0–B7 Side B Inputs or 3-STATE Outputs Truth Table Inputs OE Outputs T/R L L Bus B0 – B7 Data to Bus A0 – A7 L H Bus A0 – A7 Data to Bus B0 – B7 H X HIGH Z State on A0 – A7, B0 – B7 (Note 3) H HIGH Voltage Level L LOW Voltage Level X Immaterial Z High Impedance Note 3: Unused bus terminals during HIGH Z State must be held HIGH or LOW. Logic Diagram www.fairchildsemi.com 2 Symbol Parameter VCC Supply Voltage VI DC Input Voltage VO DC Output Voltage IIK DC Input Diode Current IOK DC Output Diode Current Value IO DC Output Source/Sink Current ICC DC Supply Current per Supply Pin IGND DC Ground Current per Ground Pin TSTG Storage Temperature Conditions 0.5 to 7.0 0.5 to 7.0 0.5 to 7.0 0.5 to VCC 0.5 50 50 50 r50 r100 r100 65 to 150 Units V V Output in 3-STATE Output in HIGH or LOW State (Note 5) VI GND V mA VO GND mA VO ! VCC mA mA mA qC Recommended Operating Conditions (Note 6) Symbol VCC Parameter VI Input Voltage VO Output Voltage IOH/IOL Min Max Operating 2.0 3.6 Data Retention 1.5 3.6 Supply Voltage Output Current TA Free-Air Operating Temperature 't/'V Input Edge Rate, VIN 0.8V 2.0V, VCC 0 5.5 HIGH or LOW State 0 VCC 3-STATE 0 5.5 VCC 3.0V 3.6V VCC 2.7V - 3.0V VCC 2.3V - 2.7V r12 r8 r4 Units V V V mA 40 85 qC 0 10 ns/V 3.0V Note 4: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 5: IO Absolute Maximum Rating must be observed. Note 6: Unused inputs or I/O pins must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH VOL Parameter Conditions HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage LOW Level Output Voltage VCC TA (V) Min 2.3 2.7 1.7 2.7 3.6 2.0 40qC to 85qC Max V 2.3 2.7 0.7 2.7 - 3.6 0.8 IOH 100 PA 2.3 - 3.6 VCC 0.2 IOH 4 mA 2.3 1.8 IOH 4 mA 2.7 2.2 IOH 6 mA 3.0 2.4 IOH 8 mA 2.7 2.0 IOH 12 mA 3.0 2.0 Units V V IOL 100 PA 2.3 3.6 0.2 IOL 4 mA 2.3 0.6 IOL 4 mA 2.7 0.4 IOL 6 mA 3.0 0.55 IOL 8 mA 2.7 0.6 IOL 12 mA 3.0 0.8 2.3 3.6 r5.0 PA 2.3 3.6 r5.0 PA II Input Leakage Current 0 d VI d 5.5V IOZ 3-STATE I/O Leakage 0 d VO d 5.5V VI VIH or VIL 3 V www.fairchildsemi.com 74LCXR2245 Absolute Maximum Ratings(Note 4) 74LCXR2245 DC Electrical Characteristics Symbol (Continued) Parameter Conditions IOFF Power-Off Leakage Current VI or VO ICC Quiescent Supply Current VI Increase in ICC per Input V CC 0.6V VIH TA (V) Min 5.5V VCC or GND 3.6V d VI, VO d 5.5V (Note 7) 'ICC VCC 40qC to 85qC Units Max 0 10 2.3 3.6 10 2.3 3.6 r10 2.3 - 3.6 500 PA PA PA Note 7: Outputs disabled or 3-STATE only. AC Electrical Characteristics 40qC to 85qC, RL TA Symbol Parameter VCC CL 3.3V r 0.3V VCC 50 pF 2.7V CL 500: VCC 50 pF CL 2.5V r 0.2V Min Max Min Max Min tPHL Propagation Delay 1.5 8.0 1.5 9.0 1.5 9.6 tPLH An to Bn or Bn to An 1.5 8.0 1.5 9.0 1.5 9.6 tPZL Output Enable Time 1.5 9.5 1.5 10.5 1.5 11.0 1.5 9.5 1.5 10.5 1.5 11.0 tPZH tPLZ Output Disable Time tPHZ Max 1.5 7.5 1.5 8.5 1.5 9.0 1.5 7.5 1.5 8.5 1.5 9.0 tOSHL Output to Output Skew 1.0 tOSLH (Note 8) 1.0 Units 30 pF ns ns ns ns Note 8: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL) or LOW-to-HIGH (tOSLH). Dynamic Switching Characteristics Symbol VOLP VOLV Parameter Quiet Output Dynamic Peak VOL Quiet Output Dynamic Valley VOL VCC (V) Conditions 25qC TA Units Typical CL 50 pF, VIH 3.3V, VIL 0V 3.3 0.5 CL 30 pF, VIH 2.5V, VIL 0V 2.5 0.4 CL 50 pF, VIH 3.3V, V IL 0V 3.3 0.5 CL 30 pF, VIH 2.5V, VIL 0V 2.5 0.4 V V Capacitance Symbol Parameter Conditions CIN Input Capacitance VCC Open, VI CI/O Input/Output Capacitance VCC 3.3V, VI 0V or VCC CPD Power Dissipation Capacitance VCC 3.3V, VI 0V or VCC, f www.fairchildsemi.com 4 0V or VCC 10 MHz Typical Units 7 pF 8 pF 25 pF 74LCXR2245 AC LOADING and WAVEFORMS Generic for LCX Family FIGURE 1. AC Test Circuit (CL includes probe and jig capacitance) Test Switch tPLH, tPHL Open tPZL, tPLZ 6V at VCC 3.3 r 0.3V VCC x 2 at VCC 2.5 r 0.2V tPZH,tPHZ GND Waveform for Inverting and Non-Inverting Functions 3-STATE Output High Enable and Disable Times for Logic Propagation Delay. Pulse Width and trec Waveforms Setup Time, Hold Time and Recovery Time for Logic trise and tfall 3-STATE Output Low Enable and Disable Times for Logic FIGURE 2. Waveforms (Input Characteristics; f =1MHz, tR = tF = 3ns) Symbol VCC 3.3V r 0.3V 2.7V 2.5V r 0.2V Vmi 1.5V 1.5V VCC/2 Vmo 1.5V 1.5V VCC/2 Vx VOL 0.3V VOL 0.3V VOL 0.15V Vy VOH 0.3V VOH 0.3V VOH 0.15V 5 www.fairchildsemi.com 74LCXR2245 Schematic Diagram Generic for LCX Family www.fairchildsemi.com 6 74LCXR2245 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide Package Number M20B 7 www.fairchildsemi.com 74LCXR2245 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M20D www.fairchildsemi.com 8 74LCXR2245 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Shrink Small Outline Package (SSOP), JEDEC MO-150, 5.3mm Wide Package Number MSA20 9 www.fairchildsemi.com 74LCXR2245 Low Voltage Bidirectional Transceiver with 5V Tolerant Inputs and Outputs and 26: Series Resistors on Both A and B Ports Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC20 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 10