MCC
1N5221
THRU
1N5267
omponents
20736 Marilla Street Chatsworth
!"#
$
% !"#
TM
Micro Commercial Components
Features
•
•
•
•
•
•
500 mW
Zener Diode
2.4 to 75 Volts
Wide Voltage Range Available
Glass Package
High Temp Soldering: 260°C for 10 Seconds At Terminals
Marking : Cathode band and type number
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Moisture Sensitivity: Level 1
Maximum Ratings
•
•
•
•
•
DO-35
Operating Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
500 mWatt DC Power Dissipation
Power Derating: 4.0mW/°C above 50°C
Forward Voltage @ 200mA: 1.1 Volts
Figure 1 - Typical Capacitance
D
100
A
Cathode
Mark
pf
10
B
At zero volts
At –2 Volts V R
D
1
0
100
C
200
VZ
Typical Capacitance (pf) – versus – Zener voltage (VZ)
Figure 2 - Derating Curve
400
DIMENSIONS
mW
DIM
A
B
C
D
200
INCHES
MIN
------1.000
MAX
.166
.079
.020
---
MM
MIN
------25.40
MAX
4.2
2.00
.52
---
NOTE
50
100
150
Temperature °C
Power Dissipation (mW) - Versus - Temperature °C
0
Note:
1. Lead in Glass Exemption Applied, see EU Directive Annex 5.
Revision: A
www.mccsemi.com
1 of 5
2011/01/01
MCC
1N5221 thru 1N5267
Micro Commercial Components
ELECTRICAL CHARACTERISTICS @25°C
MCC
PART
NUMBER
NOMINAL ZENER
VOLTAGE VZ @ IZT
VOLTS
1N5221
1N5222
1N5223
1N5224
1N5225
1N5226
1N5227
1N5228
1N5229
1N5230
1N5231
1N5232
1N5233
1N5234
1N5235
1N5236
1N5237
1N5238
1N5239
1N5240
1N5241
1N5242
1N5243
1N5244
1N5245
1N5246
1N5247
1N5248
1N5249
1N5250
1N5251
1N5252
1N5253
1N5254
1N5255
1N5256
1N5257
1N5258
1N5259
1N5260
1N5261
1N5262
1N5263
1N5264
1N5265
1N5266
1N5267
2.4
2.5
2.7
2.8
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.0
6.2
6.8
7.5
8.2
8.7
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
25
27
28
30
33
36
39
43
47
51
56
60
62
68
75
TEST
CURRENT I ZT
mA
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
9.5
9.0
8.5
7.8
7.4
7.0
6.6
6.2
5.6
5.2
5.0
4.6
4.5
4.2
3.8
3.4
3.2
3.0
2.7
2.5
2.2
2.1
2.0
1.8
1.7
MAXIMUM ZENER IMPEDANCE
‘B’ SUFFIX ONLY
Z ZT @ IZT
Z ZK @I ZK = 0.25mA
OHMS
OHMS
MAXIMUM REVERSE
LEAKAGE CURRENT
IR
@
VR
µA
VOLTS
30
30
30
30
29
28
24
23
22
19
17
11
7.0
7.0
5.0
6.0
8.0
8.0
10
17
22
30
13
15
16
17
19
21
23
25
29
33
35
41
44
49
58
70
80
93
105
125
150
170
185
230
270
100
100
75
75
50
25
15
10
5.0
5.0
5.0
5.0
5.0
5.0
3.0
3.0
3.0
3.0
3.0
3.0
2.0
1.0
0.5
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
1200
1250
1300
1400
1600
1600
1700
1900
2000
1900
1600
1600
1600
1000
750
500
500
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
700
700
800
900
1000
1100
1300
1400
1400
1600
1700
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
2.0
2.0
3.0
3.5
4.0
5.0
6.0
6.5
6.5
7.0
8.0
8.4
9.1
9.9
10
11
12
13
14
14
15
17
18
19
21
21
23
25
27
30
33
36
39
43
46
47
52
56
MAX. ZENER VOLTAGE
TEMP COEFFICIENT ‘B’
SUFFIX ONLY
% / °C
-0.085
-0.085
-0.080
-0.080
-0.075
-0.070
-0.065
-0.060
±0.055
±0.030
±0.030
+0.038
+0.038
+0.045
+0.050
+0.058
+0.062
+0.065
+0.068
+0.075
+0.076
+0.077
+0.079
+0.082
+0.082
+0.083
+0.084
+0.085
+0.086
+0.086
+0.087
+0.088
+0.089
+0.090
+0.091
+0.091
+0.092
+0.093
+0.094
+0.095
+0.095
+0.096
+0.096
+0.097
+0.097
+0.097
+0.098
NOTE 1: Table as shown lists type numbers, which indicate a tolerance of ±20% with guaranteed limits on only Vz, IR, and V F. Devices with
guaranteed limits on all six parameters are indicated by suffix “A” for ±10%, “B” for ±5%, “C” for ±2% tolerance
NOTE 2: The electrical characteristics are measured after allowing the device to stabilize for 20 seconds.
NOTE 3: Temperature coefficient (áVZ). Test conditions for temperature coefficient are as follows:
a.
IZT = 7.5mA, TI = 25oC T2 = 125oC (1N5221 thru 1N5242)
b.
IZT = Rated IZT , TI = 25oC, T2 = 125oC (1N5243 thru 1N5267)
Device to be temperature stabilized with current applied prior to reading breakdown voltage at the specified ambient temperature.
Revision: A
www.mccsemi.com
2 of 5
2011/01/01
TM
MCC
1N5221
1N
thru 1N5267
TM
Micro Commercial Components
Figure 1
Zener Voltage versus Zener Current – Vz =1 thru 16 Volts
20
10
TA=25к
1
mA
0.1
0.01
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
29
30
VOLTS
IZ , ZENER CURRENT - mA
VZ , ZENER VOLTAGE - V
Figure 2
Zener Voltage versus Zener Current – Vz =15 thru 30 Volts
20
10
TA=25к
1
mA
0.1
0.01
15
16
17
18
19
20
21
22
23
24
25
26
27
28
VOLTS
IZ , ZEBER CURRENT - mA
VZ , ZENER VOLTAGE - V
Revision: A
www.mccsemi.com
3 of 5
2011/01/01
MCC
1N5221 thru 1N5267
TM
Micro Commercial Components
Figure 3
Zener Voltage versus Zener Current – Vz =30 thru 75 Volts
20
10
TA=25к
1
mA
0.1
0.01
30
35
40
45
50
55
60
65
70
80
75
85
90
95
100
105
VOLTS
IZ , ZENER CURRENT - mA
VZ , ZENER VOLTAGE - V
Figure4
Thermal resistance from junction to ambient as a function of pulse duration
10
3
į=1
0.75
0.50
0.33
102
0.20
0.10
0.05
Rth j-a(K/W)
0.02
0.01
Љ0.001
10
1
10-1
1
10
10
2
10
3
104
105
tp(ms)
Revision: A
www.mccsemi.com
4 of 5
2011/01/01
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 10Kpcs/Reel
Part Number-AP
Ammo Packing: 5Kpcs/Ammo Box
Part Number-BP
Bulk: 100Kpcs/Carton
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
Revision: A
www.mccsemi.com
5 of 5
2011/01/01
3